--- A minimalistic PPPoE (Point-to-point protocol over Ethernet)
-- library, implementing basic support for PPPoE
-- Discovery and Configuration requests. The PPPoE protocol is ethernet based
-- and hence does not use any IPs or port numbers.
--
-- The library contains a number of classes to support packet creation,
-- parsing and sending/receiving responses. The classes are:
--   o LCP   - Contains classes to build and parse PPPoE LCP requests and
--             responses.
--
--   o PPPoE - Contains classes to build and parse PPPoE requests and
--             responses.
--
--   o Comm  - Contains some basic functions for sending and receiving
--             LCP and PPPoE requests and responses.
--
--   o Helper- The Helper class serves as the main interface between scripts
--             and the library.
--
--
-- @author Patrik Karlsson <patrik@cqure.net>
--

local rand = require "rand"
local nmap = require "nmap"
local packet = require "packet"
local stdnse = require "stdnse"
local string = require "string"
local table = require "table"
_ENV = stdnse.module("pppoe", stdnse.seeall)


-- A Class to handle the Link Control Protocol LCP
LCP = {

  ConfigOption = {

    RESERVED = 0,
    MRU = 1,
    AUTH_PROTO = 3,
    QUAL_PROTO = 4,
    MAGIC_NUMBER = 5,
    PROTO_COMPR = 7,
    ACFC = 8,

    -- Value has already been encoded, treat it as a byte stream
    RAW = -1,

    -- Creates a new config option
    -- @param option number containing the configuration option
    -- @param value containing the configuration option value
    -- @param raw string containing the configuration options raw value
    -- @return o new instance of ConfigOption
    new = function(self, option, value, raw)
      local o = {
        option = option,
        value = value,
        raw = raw,
      }
      setmetatable(o, self)
      self.__index = self
      return o
    end,

    -- Parses a byte stream and builds a new instance of the ConfigOption
    -- class
    -- @param data string containing raw bytes to parse
    -- @return o instance of ConfigOption
    parse = function(data)
      local opt, pos, len = {}, 1, 0
      opt.option, len, pos = string.unpack("BB", data, pos)
      opt.raw, pos = string.unpack("c" .. ( len - 2 ), data, pos)

      -- MRU
      if ( 1 == opt.option ) then
        opt.value = string.unpack(">I2", opt.raw)
      end
      return LCP.ConfigOption:new(opt.option, opt.value, opt.raw)
    end,

    -- Converts the class instance to string
    -- @return string containing the raw config option
    __tostring = function(self)
      -- MRU
      if ( self.raw ) then
        return string.pack(">BB", self.option, #self.raw + 2) .. self.raw
      elseif( 1 == self.option ) then
        return string.pack(">BBI2", 1, 4, self.value)
      else
        error( ("Unsupported configuration option %d"):format(self.option) )
      end
    end,
  },

  -- A class to hold multiple ordered config options
  ConfigOptions = {

    new = function(self, options)
      local o = {
        options = options or {},
      }
      setmetatable(o, self)
      self.__index = self
      return o
    end,

    -- Adds a new config option to the table
    -- @param option instance of ConfigOption
    add = function(self, option)
      table.insert(self.options, option)
    end,

    -- Gets a config option by ID
    -- @param opt number containing the configuration option to retrieve
    -- @return v instance of ConfigOption
    getById = function(self, opt)
      for _, v in ipairs(self.options) do
        if ( v.option == opt ) then
          return v
        end
      end
    end,

    -- Returns all config options in an ordered table
    -- @return tab table containing all configuration options
    getTable = function(self)
      local tab = {}
      for _, v in ipairs(self.options) do
        table.insert(tab, v)
      end
      return tab
    end,


    -- Parses a byte stream and builds a new instance of the ConfigOptions
    -- class
    -- @param data string containing raw bytes to parse
    -- @return o instance of ConfigOption
    parse = function(data)
      local options = LCP.ConfigOptions:new()
      local pos, opt, opt_val, len

      repeat
        opt, len, pos = string.unpack(">BB", data, pos)
        if ( 0 == opt ) then break end
        opt_val, pos = string.unpack("c"..len, data, (pos - 2))
        options:add(LCP.ConfigOption.parse(opt_val))
      until( pos == #data )
      return options
    end,

    -- Converts the class instance to string
    -- @return string containing the raw config option
    __tostring = function(self)
      local str = ""
      for _, v in ipairs(self.options) do
        str = str .. tostring(v)
      end
      return str
    end,

  },

  ConfigOptionName = {
    [0] = "Reserved",
    [1] = "Maximum receive unit",
    [3] = "Authentication protocol",
    [4] = "Quality protocol",
    [5] = "Magic number",
    [7] = "Protocol field compression",
    [8] = "Address and control field compression",
  },

  Code = {
    CONFIG_REQUEST = 1,
    CONFIG_ACK = 2,
    CONFIG_NAK = 3,
    TERMINATE_REQUEST = 5,
    TERMINATE_ACK = 6,
  },

  -- The LCP Header
  Header = {

    -- Creates a new instance of the LCP header
    -- @param code number containing the LCP code of the request
    -- @param identifier number containing the LCP identifier
    new = function(self, code, identifier)
      local o = {
        code = code,
        identifier = identifier or 1,
        length = 0,
      }
      setmetatable(o, self)
      self.__index = self
      return o
    end,


    -- Parses a byte stream and builds a new instance of the Header class
    -- @param data string containing raw bytes to parse
    -- @return o instance of ConfigOption
    parse = function(data)
      local header = LCP.Header:new()
      header.code, header.identifier, header.length = string.unpack(">BBI2", data)
      return header
    end,

    -- Converts the class instance to string
    -- @return string containing the raw config option
    __tostring = function(self)
      return string.pack(">BBI2", self.code, self.identifier, self.length)
    end,

  },

  ConfigRequest = {

    -- Creates a new instance of the ConfigRequest class
    -- @param identifier number containing the LCP identifier
    -- @param options table of <code>LCP.ConfigOption</code> options
    -- @return o instance of ConfigRequest
    new = function(self, identifier, options)
      local o = {
        header = LCP.Header:new(LCP.Code.CONFIG_REQUEST, identifier),
        options = LCP.ConfigOptions:new(options)
      }
      setmetatable(o, self)
      self.__index = self
      return o
    end,

    -- Parses a byte stream and builds a new instance of the ConfigRequest
    -- class
    -- @param data string containing raw bytes to parse
    -- @return o instance of ConfigRequest
    parse = function(data)
      local req = LCP.ConfigRequest:new()
      req.header = LCP.Header.parse(data)
      req.options = LCP.ConfigOptions.parse(data:sub(#tostring(req.header) + 1))
      return req
    end,

    -- Converts the class instance to string
    -- @return string containing the raw config option
    __tostring = function(self)
      self.header.length = 4 + #tostring(self.options)
      return tostring(self.header) .. tostring(self.options)
    end,
  },

  ConfigNak = {

    -- Creates a new instance of the ConfigNak class
    -- @param identifier number containing the LCP identifier
    -- @param options table of <code>LCP.ConfigOption</code> options
    -- @return o instance of ConfigNak
    new = function(self, identifier, options)
      local o = {
        header = LCP.Header:new(LCP.Code.CONFIG_NAK, identifier),
        options = LCP.ConfigOptions:new(options),
      }
      setmetatable(o, self)
      self.__index = self
      return o
    end,

    -- Converts the class instance to string
    -- @return string containing the raw config option
    __tostring = function(self)
      self.header.length = 4 + #tostring(self.options)
      return tostring(self.header) .. tostring(self.options)
    end,
  },

  ConfigAck = {

    -- Creates a new instance of the ConfigAck class
    -- @param identifier number containing the LCP identifier
    -- @param options table of <code>LCP.ConfigOption</code> options
    -- @return o instance of ConfigNak
    new = function(self, identifier, options)
      local o = {
        header = LCP.Header:new(LCP.Code.CONFIG_ACK, identifier),
        options = LCP.ConfigOptions:new(options),
      }
      setmetatable(o, self)
      self.__index = self
      return o
    end,

    -- Parses a byte stream and builds a new instance of the ConfigAck class
    -- @param data string containing raw bytes to parse
    -- @return o instance of ConfigRequest
    parse = function(data)
      local ack = LCP.ConfigAck:new()
      ack.header = LCP.Header.parse(data)
      ack.options = LCP.ConfigOptions.parse(data:sub(#tostring(ack.header) + 1))
      return ack
    end,

    -- Converts the class instance to string
    -- @return string containing the raw config option
    __tostring = function(self)
      self.header.length = 4 + #tostring(self.options)
      return tostring(self.header) .. tostring(self.options)
    end,

  },

  TerminateRequest = {

    -- Creates a new instance of the TerminateRequest class
    -- @param identifier number containing the LCP identifier
    -- @return o instance of ConfigNak
    new = function(self, identifier, data)
      local o = {
        header = LCP.Header:new(LCP.Code.TERMINATE_REQUEST, identifier),
        data = data or "",
      }
      setmetatable(o, self)
      self.__index = self
      return o
    end,

    -- Converts the class instance to string
    -- @return string containing the raw config option
    __tostring = function(self)
      self.header.length = 4 + #self.data
      return tostring(self.header) .. self.data
    end,
  }

}

-- The PPPoE class
PPPoE = {

  -- Supported PPPoE codes (requests/responses)
  Code = {
    SESSION_DATA = 0x00,
    PADO = 0x07,
    PADI = 0x09,
    PADR = 0x19,
    PADS = 0x65,
    PADT = 0xa7,
  },

  -- Support PPPoE Tag types
  TagType = {
    SERVICE_NAME = 0x0101,
    AC_NAME = 0x0102,
    HOST_UNIQUE = 0x0103,
    AC_COOKIE = 0x0104,
  },

  -- Table used to convert table IDs to Names
  TagName = {
    [0x0101] = "Service-Name",
    [0x0102] = "AC-Name",
    [0x0103] = "Host-Uniq",
    [0x0104] = "AC-Cookie",
  },


  Header = {

    -- Creates a new instance of the PPPoE header class
    -- @param code number containing the PPPoE code
    -- @param session number containing the PPPoE session
    -- @return o instance of Header
    new = function(self, code, session)
      local o = {
        version = 1,
        type = 1,
        code = code,
        session = session or 0,
        length = 0,
      }
      setmetatable(o, self)
      self.__index = self
      return o
    end,

    -- Parses a byte stream and builds a new instance of the class
    -- @param data string containing raw bytes to parse
    -- @return o instance of Header
    parse = function(data)
      local header = PPPoE.Header:new()
      local vertyp
      vertyp, header.code, header.session, header.length = string.unpack(">BBI2I2", data)
      header.version = (vertyp >> 4)
      header.type = (vertyp & 0x0F)
      return header
    end,

    -- Converts the instance to string
    -- @return string containing the raw config option
    __tostring = function(self)
      local vertype = (self.version << 4) + self.type
      return string.pack(">BBI2I2", vertype, self.code, self.session, self.length)
    end,


  },

  -- The TAG NVP Class
  Tag = {

    -- Creates a new instance of the Tag class
    -- @param tag number containing the tag type
    -- @param value string/number containing the tag value
    -- @return o instance of Tag
    new = function(self, tag, value)
      local o = { tag = tag, value = value or "" }
      setmetatable(o, self)
      self.__index = self
      return o
    end,

    -- Converts the instance to string
    -- @return string containing the raw config option
    __tostring = function(self)
      return string.pack(">I2s2", self.tag, self.value)
    end,
  },

  PADI = {

    -- Creates a new instance of the PADI class
    -- @param tags table of <code>PPPoE.Tag</code> instances
    -- @param value string/number containing the tag value
    -- @return o instance of ConfigNak
    new = function(self, tags)
      local c = rand.random_string(8)

      local o = {
        header = PPPoE.Header:new(PPPoE.Code.PADI),
        tags = tags or {
          PPPoE.Tag:new(PPPoE.TagType.SERVICE_NAME),
          PPPoE.Tag:new(PPPoE.TagType.HOST_UNIQUE, c)
        }
      }
      setmetatable(o, self)
      self.__index = self
      return o
    end,

    -- Converts the instance to string
    -- @return string containing the raw config option
    __tostring = function(self)
      local tags = ""
      for _, tag in ipairs(self.tags) do
        tags = tags .. tostring(tag)
      end
      self.header.length = #tags
      return tostring(self.header) .. tags
    end,

  },

  PADO = {

    -- Creates a new instance of the PADO class
    -- @return o instance of PADO
    new = function(self)
      local o = { tags = {} }
      setmetatable(o, self)
      self.__index = self
      return o
    end,

    -- Parses a byte stream and builds a new instance of the class
    -- @param data string containing raw bytes to parse
    -- @return o instance of PADO
    parse = function(data)
      local pado = PPPoE.PADO:new()
      pado.header = PPPoE.Header.parse(data)
      local pos = #tostring(pado.header) + 1
      pado.data = data:sub(pos)

      repeat
        local tag, decoded, raw
        tag, raw, pos = string.unpack(">I2s2", pos)
        if ( PPPoE.TagDecoder[tag] ) then
          decoded = PPPoE.TagDecoder[tag](raw)
        else
          stdnse.debug1("PPPoE: Unsupported tag (%d)", tag)
        end
        local t = PPPoE.Tag:new(tag, raw)
        t.decoded = decoded
        table.insert(pado.tags, t)
      until( pos >= #data )

      return pado
    end,
  },

  PADR = {

    -- Creates a new instance of the PADR class
    -- @param tags table of <code>PPPoE.Tag</code> instances
    -- @return o instance of PADR
    new = function(self, tags)
      local o = {
        tags = tags or {},
        header = PPPoE.Header:new(PPPoE.Code.PADR)
      }
      setmetatable(o, self)
      self.__index = self
      return o
    end,

    -- Converts the instance to string
    -- @return string containing the raw config option
    __tostring = function(self)
      local tags = ""
      for _, tag in ipairs(self.tags) do
        tags = tags .. tostring(tag)
      end
      self.header.length = #tags
      return tostring(self.header) .. tags
    end,

  },

  PADS = {

    -- Creates a new instance of the PADS class
    -- @return o instance of PADS
    new = function(self)
      local o = { tags = {} }
      setmetatable(o, self)
      self.__index = self
      return o
    end,

    -- Parses a byte stream and builds a new instance of the class
    -- @param data string containing raw bytes to parse
    -- @return o instance of PADS
    parse = function(data)
      local pads = PPPoE.PADS:new()
      pads.header = PPPoE.Header.parse(data)
      local pos = #tostring(pads.header) + 1
      pads.data = data:sub(pos)
      return pads
    end,

  },

  PADT = {

    -- Creates a new instance of the PADT class
    -- @param session number containing the PPPoE session
    -- @return o instance of PADT
    new = function(self, session)
      local o = { header = PPPoE.Header:new(PPPoE.Code.PADT) }
      setmetatable(o, self)
      o.header.session = session
      self.__index = self
      return o
    end,

    -- Parses a byte stream and builds a new instance of the class
    -- @param data string containing raw bytes to parse
    -- @return o instance of PADI
    parse = function(data)
      local padt = PPPoE.PADT:new()
      padt.header = PPPoE.Header.parse(data)
      return padt
    end,

    -- Converts the instance to string
    -- @return string containing the raw config option
    __tostring = function(self)
      return tostring(self.header)
    end,
  },

  SessionData = {

    -- Creates a new instance of the SessionData class
    -- @param session number containing the PPPoE session
    -- @param data string containing the LCP data to send
    -- @return o instance of ConfigNak
    new = function(self, session, data)
      local o = {
        data = data or "",
        header = PPPoE.Header:new(PPPoE.Code.SESSION_DATA)
      }
      setmetatable(o, self)
      o.header.session = session
      self.__index = self
      return o
    end,

    -- Parses a byte stream and builds a new instance of the class
    -- @param data string containing raw bytes to parse
    -- @return o instance of SessionData
    parse = function(data)
      local sess = PPPoE.SessionData:new()
      sess.header = PPPoE.Header.parse(data)
      local pos = #tostring(sess.header) + 1 + 2
      sess.data = data:sub(pos)
      return sess
    end,

    -- Converts the instance to string
    -- @return string containing the raw config option
    __tostring = function(self)
      -- 2 for the encapsulation
      self.header.length = 2 + 4 + #self.data
      return tostring(self.header) .. "\xC0\x21" .. self.data
    end,

  }


}

-- A bunch of tag decoders
PPPoE.TagDecoder = {}
PPPoE.TagDecoder.decodeHex = stdnse.tohex
PPPoE.TagDecoder.decodeStr = function(data) return data end
PPPoE.TagDecoder[PPPoE.TagType.SERVICE_NAME] = PPPoE.TagDecoder.decodeStr
PPPoE.TagDecoder[PPPoE.TagType.AC_NAME] = PPPoE.TagDecoder.decodeStr
PPPoE.TagDecoder[PPPoE.TagType.AC_COOKIE] = PPPoE.TagDecoder.decodeHex
PPPoE.TagDecoder[PPPoE.TagType.HOST_UNIQUE] = PPPoE.TagDecoder.decodeHex

-- The Comm class responsible for communication with the PPPoE server
Comm = {

  -- Creates a new instance of the Comm class
  -- @param iface string containing the interface name
  -- @param src_mac string containing the source MAC address
  -- @param dst_mac string containing the destination MAC address
  -- @return o new instance of Comm
  new = function(self, iface, src_mac, dst_mac)
    local o = {
      iface = iface,
      src_mac = src_mac,
      dst_mac = dst_mac,
    }
    setmetatable(o, self)
    self.__index = self
    return o
  end,

  -- Sets up the pcap receiving socket
  -- @return status true on success
  connect = function(self)
    self.socket = nmap.new_socket()
    self.socket:set_timeout(10000)

    local mac = stdnse.format_mac(self.src_mac)

    -- let's set a filter on PPPoE we can then check what packet is ours,
    -- based on the HOST_UNIQUE tag, if we need to
    self.socket:pcap_open(self.iface, 1500, false, "ether[0x0c:2] == 0x8863 or ether[0x0c:2] == 0x8864 and ether dst " .. mac)
    return true
  end,

  -- Sends a packet
  -- @param data class containing the request to send
  -- @return status true on success, false on failure
  send = function(self, data)
    local eth_type = ( data.header.code == PPPoE.Code.SESSION_DATA ) and 0x8864 or 0x8863
    local ether = self.dst_mac .. self.src_mac .. string.pack(">I2", eth_type)
    local p = packet.Frame:new(ether .. tostring(data))

    local sock = nmap.new_dnet()
    if ( not(sock) ) then
      return false, "Failed to create raw socket"
    end

    local status = sock:ethernet_open(self.iface)
    -- we don't actually need to do this as the script simply crashes
    -- if we don't have the right permissions at this point
    if ( not(status) ) then
      return false, "Failed to open raw socket"
    end

    status = sock:ethernet_send(p.frame_buf)
    if ( not(status) ) then
      return false, "Failed to send data"
    end
    sock:ethernet_close()
    return true
  end,

  -- Receive a response from the server
  -- @return status true on success, false on failure
  -- @return response class containing the response or
  --         err string on error
  recv = function(self)
    local status, _, l2, l3 = self.socket:pcap_receive()
    -- if we got no response, just return false as there's
    -- probably not really an error
    if ( not(status) ) then
      return false, "Did not receive any packets"
    end

    local header = PPPoE.Header.parse(l3)
    local p = packet.Frame:new(l2..l3)

    -- there's probably a more elegant way of doing this
    if ( packet.ETHER_TYPE_PPPOE_DISCOVERY == p.ether_type ) then
      if ( header.code == PPPoE.Code.PADO ) then
        local pado = PPPoE.PADO.parse(l3)
        pado.mac_srv = p.mac_src
        return true, pado
      elseif ( header.code == PPPoE.Code.PADS ) then
        local pads = PPPoE.PADS.parse(l3)
        return true, pads
      elseif ( header.code == PPPoE.Code.PADT ) then
        local pads = PPPoE.PADT.parse(l3)
        return true, pads
      end
    elseif ( packet.ETHER_TYPE_PPPOE_SESSION == p.ether_type ) then
      return true, PPPoE.SessionData.parse(l3)
    end
    return false, ("Received unsupported response, can't decode code (%d)"):format(header.code)
  end,

  -- Does an "exchange", ie, sends a request and waits for a response
  -- @param data class containing the request to send
  -- @return status true on success, false on failure
  -- @return response class containing the response or
  --         err string on error
  exch = function(self, data)
    local status, err = self:send(data)
    if ( not(status) ) then
      return false, err
    end
    local retries, resp = 3, nil

    repeat
      status, resp = self:recv()
      if ( data.header and 0 == data.header.session ) then
        return true, resp
      elseif ( data.header and data.header.session == resp.header.session ) then
        return true, resp
      end
      retries = retries - 1
    until(retries == 0)

    return false, "Failed to retrieve proper PPPoE response"
  end,

}

-- The Helper class is the main script interface
Helper = {

  -- Creates a new instance of Helper
  -- @param iface string containing the name of the interface to use
  -- @return o new instance on success, nil on failure
  new = function(self, iface)
    local o = {
      iface = iface,

      -- set the LCP identifier to 0
      identifier = 0,
    }
    setmetatable(o, self)
    self.__index = self

    if ( not(nmap.is_privileged()) ) then
      return nil, "The PPPoE library requires Nmap to be run in privileged mode"
    end

    -- get src_mac
    local info = nmap.get_interface_info(iface)
    if ( not(info) or not(info.mac) ) then
      return nil, "Failed to get source MAC address"
    end
    o.comm = Comm:new(iface, info.mac)
    return o
  end,

  -- Sets up the pcap socket for listening and does some other preparations
  -- @return status true on success, false on failure
  connect = function(self)
    return self.comm:connect()
  end,


  -- Performs a PPPoE discovery initiation by sending a PADI request to the
  -- ethernet broadcast address
  -- @return status true on success, false on failure
  -- @return pado instance of PADO on success, err string on failure
  discoverInit = function(self)
    local padi = PPPoE.PADI:new()
    self.comm.dst_mac = ("\xFF"):rep(6)
    local status, err = self.comm:send(padi)
    if ( not(status) ) then
      return false, err
    end
    -- wait for a pado
    local pado, retries = nil, 3

    repeat
      status, pado = self.comm:recv()
      if ( not(status) ) then
        return status, pado
      end
      retries = retries - 1
    until( pado.tags or retries == 0 )
    if ( not(pado.tags) ) then
      return false, "PADO response contained no tags"
    end

    local pado_host_unique
    for _, tag in ipairs(pado.tags) do
      if ( PPPoE.TagType.HOST_UNIQUE == tag.tag ) then
        pado_host_unique = tag.raw
      end
    end

    -- store the tags for later use
    self.tags = pado.tags
    self.comm.dst_mac = pado.mac_srv

    if ( pado_host_unique and
      pado_host_unique ~= padi.tags[PPPoE.TagType.HOST_UNIQUE] ) then
      -- currently, we don't handle this, we probably should
      -- in order to do so, we need to split the function exch
      -- to recv and send
      return false, "Got incorrect answer"
    end

    return true, pado
  end,

  -- Performs a Discovery Request by sending PADR to the PPPoE ethernet
  -- address
  -- @return status true on success, false on failure
  -- @return pads instance of PADS on success
  discoverRequest = function(self)

    -- remove the AC-Name tag if there is one
    local function getTag(tag)
      for _, t in ipairs(self.tags) do
        if ( tag == t.tag ) then
          return t
        end
      end
    end

    local taglist = {
      PPPoE.TagType.SERVICE_NAME,
      PPPoE.TagType.HOST_UNIQUE,
      PPPoE.TagType.AC_COOKIE
    }

    local tags = {}
    for _, t in ipairs(taglist) do
      if ( getTag(t) ) then
        table.insert(tags, getTag(t))
      end
    end

    local padr = PPPoE.PADR:new(tags)
    local status, pads = self.comm:exch(padr)

    if ( status ) then
      self.session = pads.header.session
    end

    return status, pads
  end,

  -- Attempts to specify a method for authentication
  -- If the server responds with another method it's NAK:ed and we try to set
  -- our requested method instead. If this fails, we return a failure
  -- @param method string containing one of the following methods:
  --        <code>MSCHAPv1</code>, <code>MSCHAPv2</code> or <code>PAP</code>
  -- @return status true on success, false on failure
  --         err string containing error message on failure
  setAuthMethod = function(self, method)

    local AuthMethod = {
      methods = {
        { name = "EAP", value = "\xC2\x27" },
        { name = "MSCHAPv1", value = "\xC2\x23\x80" },
        { name = "MSCHAPv2", value = "\xC2\x23\x81" },
        { name = "PAP", value = "\xC0\x23" },
      }
    }

    AuthMethod.byName = function(name)
      for _, m in ipairs(AuthMethod.methods) do
        if ( m.name == name ) then
          return m
        end
      end
    end

    AuthMethod.byValue = function(value)
      for _, m in ipairs(AuthMethod.methods) do
        if ( m.value == value ) then
          return m
        end
      end
    end

    local auth_data = ( AuthMethod.byName(method) and AuthMethod.byName(method).value )
    if ( not(auth_data) ) then
      return false, ("Unsupported authentication mode (%s)"):format(method)
    end

    self.identifier = self.identifier + 1

    -- First do a Configuration Request
    local options = { LCP.ConfigOption:new(LCP.ConfigOption.MRU, 1492) }
    local lcp_req = LCP.ConfigRequest:new(self.identifier, options)
    local sess_req = PPPoE.SessionData:new(self.session, tostring(lcp_req))
    local status, resp = self.comm:exch(sess_req)

    if ( not(status) or PPPoE.Code.SESSION_DATA ~= resp.header.code ) then
      return false, "Unexpected packet type was received"
    end

    -- Make sure we got a Configuration Request in return
    local lcp_header = LCP.Header.parse(resp.data)
    if ( LCP.Code.CONFIG_REQUEST ~= lcp_header.code ) then
      return false, ("Unexpected packet type was received (%d)"):format(lcp_header.code)
    end

    local config_req = LCP.ConfigRequest.parse(resp.data)
    if ( not(config_req.options) ) then
      return false, "Failed to retrieve any options from response"
    end

    local auth_proposed = config_req.options:getById(LCP.ConfigOption.AUTH_PROTO)

    if ( auth_proposed.raw ~= auth_data ) then
      local options = { LCP.ConfigOption:new(LCP.ConfigOption.AUTH_PROTO, nil, auth_data) }
      local lcp_req = LCP.ConfigNak:new(self.identifier, options)
      local sess_req = PPPoE.SessionData:new(self.session, tostring(lcp_req))
      local status, resp = self.comm:exch(sess_req)

      if ( not(status) or PPPoE.Code.SESSION_DATA ~= resp.header.code ) then
        return false, "Unexpected packet type was received"
      end

      -- Make sure we got a Configuration Request in return
      local lcp_header = LCP.Header.parse(resp.data)
      if ( LCP.Code.CONFIG_REQUEST ~= lcp_header.code ) then
        return false, ("Unexpected packet type was received (%d)"):format(lcp_header.code)
      end

      config_req = LCP.ConfigRequest.parse(resp.data)

      -- if the authentication methods match, send an ACK
      if ( config_req.options:getById(LCP.ConfigOption.AUTH_PROTO).raw == auth_data ) then
        -- The ACK is essential the Config Request, only with a different code
        -- Do a dirty attempt to just replace the code and send the request back as an ack
        self.identifier = self.identifier + 1

        local lcp_req = LCP.ConfigAck:new(config_req.header.identifier, config_req.options:getTable())
        local sess_req = PPPoE.SessionData:new(self.session, tostring(lcp_req))
        local status, resp = self.comm:send(sess_req)

        return true
      end

      return false, "Authentication method was not accepted"
    end


    return false, "Failed to negotiate authentication mechanism"
  end,

  -- Sends a LCP Terminate Request and waits for an ACK
  -- Attempts to do so 10 times before aborting
  -- @return status true on success false on failure
  close = function(self)
    local tries = 10
    repeat
      if ( 0 == self.session ) then
        break
      end
      local lcp_req = LCP.TerminateRequest:new(self.identifier)
      local sess_req = PPPoE.SessionData:new(self.session, tostring(lcp_req))
      local status, resp = self.comm:exch(sess_req)
      if ( status and resp.header and resp.header.code ) then
        if ( PPPoE.Code.SESSION_DATA == resp.header.code ) then
          local lcp_header = LCP.Header.parse(resp.data)
          if ( LCP.Code.TERMINATE_ACK == lcp_header.code ) then
            break
          end
        end
      end
      tries = tries - 1
    until( tries == 0 )

    self.comm:exch(PPPoE.PADT:new(self.session))

    return true
  end,

}

return _ENV;