/* * pcap-septel.c: Packet capture interface for Intel/Septel card. * * Authors: Gilbert HOYEK (gil_hoyek@hotmail.com), Elias M. KHOURY * (+961 3 485243) */ #ifdef HAVE_CONFIG_H #include #endif #include #include #include #include #include "pcap-int.h" #include #include #include #include #include #include #include #include #include #include #include "pcap-septel.h" static int septel_stats(pcap_t *p, struct pcap_stat *ps); static int septel_getnonblock(pcap_t *p); static int septel_setnonblock(pcap_t *p, int nonblock); /* * Private data for capturing on Septel devices. */ struct pcap_septel { struct pcap_stat stat; } /* * Read at most max_packets from the capture queue and call the callback * for each of them. Returns the number of packets handled, -1 if an * error occurred, or -2 if we were told to break out of the loop. */ static int septel_read(pcap_t *p, int cnt, pcap_handler callback, u_char *user) { struct pcap_septel *ps = p->priv; HDR *h; MSG *m; int processed = 0 ; int t = 0 ; /* identifier for the message queue of the module(upe) from which we are capturing * packets.These IDs are defined in system.txt . By default it is set to 0x2d * so change it to 0xdd for technical reason and therefore the module id for upe becomes: * LOCAL 0xdd * upe - Example user part task */ unsigned int id = 0xdd; /* process the packets */ do { unsigned short packet_len = 0; int caplen = 0; int counter = 0; struct pcap_pkthdr pcap_header; u_char *dp ; /* * Has "pcap_breakloop()" been called? */ loop: if (p->break_loop) { /* * Yes - clear the flag that indicates that * it has, and return -2 to indicate that * we were told to break out of the loop. */ p->break_loop = 0; return -2; } /*repeat until a packet is read *a NULL message means : * when no packet is in queue or all packets in queue already read */ do { /* receive packet in non-blocking mode * GCT_grab is defined in the septel library software */ h = GCT_grab(id); m = (MSG*)h; /* a couter is added here to avoid an infinite loop * that will cause our capture program GUI to freeze while waiting * for a packet*/ counter++ ; } while ((m == NULL)&& (counter< 100)) ; if (m != NULL) { t = h->type ; /* catch only messages with type = 0xcf00 or 0x8f01 corrsponding to ss7 messages*/ /* XXX = why not use API_MSG_TX_REQ for 0xcf00 and API_MSG_RX_IND * for 0x8f01? */ if ((t != 0xcf00) && (t != 0x8f01)) { relm(h); goto loop ; } /* XXX - is API_MSG_RX_IND for an MTP2 or MTP3 message? */ dp = get_param(m);/* get pointer to MSG parameter area (m->param) */ packet_len = m->len; caplen = p->snapshot ; if (caplen > packet_len) { caplen = packet_len; } /* Run the packet filter if there is one. */ if ((p->fcode.bf_insns == NULL) || pcap_filter(p->fcode.bf_insns, dp, packet_len, caplen)) { /* get a time stamp , consisting of : * * pcap_header.ts.tv_sec: * ---------------------- * a UNIX format time-in-seconds when he packet was captured, * i.e. the number of seconds since Epoch time (January 1,1970, 00:00:00 GMT) * * pcap_header.ts.tv_usec : * ------------------------ * the number of microseconds since that second * when the packet was captured */ (void)gettimeofday(&pcap_header.ts, NULL); /* Fill in our own header data */ pcap_header.caplen = caplen; pcap_header.len = packet_len; /* Count the packet. */ ps->stat.ps_recv++; /* Call the user supplied callback function */ callback(user, &pcap_header, dp); processed++ ; } /* after being processed the packet must be *released in order to receive another one */ relm(h); }else processed++; } while (processed < cnt) ; return processed ; } static int septel_inject(pcap_t *handle, const void *buf _U_, int size _U_) { pcap_strlcpy(handle->errbuf, "Sending packets isn't supported on Septel cards", PCAP_ERRBUF_SIZE); return (-1); } /* * Activate a handle for a live capture from the given Septel device. Always pass a NULL device * The promisc flag is ignored because Septel cards have built-in tracing. * The timeout is also ignored as it is not supported in hardware. * * See also pcap(3). */ static pcap_t *septel_activate(pcap_t* handle) { /* Initialize some components of the pcap structure. */ handle->linktype = DLT_MTP2; /* * Turn a negative snapshot value (invalid), a snapshot value of * 0 (unspecified), or a value bigger than the normal maximum * value, into the maximum allowed value. * * If some application really *needs* a bigger snapshot * length, we should just increase MAXIMUM_SNAPLEN. */ if (handle->snapshot <= 0 || handle->snapshot > MAXIMUM_SNAPLEN) handle->snapshot = MAXIMUM_SNAPLEN; handle->bufsize = 0; /* * "select()" and "poll()" don't work on Septel queues */ handle->selectable_fd = -1; handle->read_op = septel_read; handle->inject_op = septel_inject; handle->setfilter_op = install_bpf_program; handle->set_datalink_op = NULL; /* can't change data link type */ handle->getnonblock_op = septel_getnonblock; handle->setnonblock_op = septel_setnonblock; handle->stats_op = septel_stats; return 0; } pcap_t *septel_create(const char *device, char *ebuf, int *is_ours) { const char *cp; pcap_t *p; /* Does this look like the Septel device? */ cp = strrchr(device, '/'); if (cp == NULL) cp = device; if (strcmp(cp, "septel") != 0) { /* Nope, it's not "septel" */ *is_ours = 0; return NULL; } /* OK, it's probably ours. */ *is_ours = 1; p = PCAP_CREATE_COMMON(ebuf, struct pcap_septel); if (p == NULL) return NULL; p->activate_op = septel_activate; /* * Set these up front, so that, even if our client tries * to set non-blocking mode before we're activated, or * query the state of non-blocking mode, they get an error, * rather than having the non-blocking mode option set * for use later. */ p->getnonblock_op = septel_getnonblock; p->setnonblock_op = septel_setnonblock; return p; } static int septel_stats(pcap_t *p, struct pcap_stat *ps) { struct pcap_septel *handlep = p->priv; /*handlep->stat.ps_recv = 0;*/ /*handlep->stat.ps_drop = 0;*/ *ps = handlep->stat; return 0; } int septel_findalldevs(pcap_if_list_t *devlistp, char *errbuf) { /* * XXX - do the notions of "up", "running", or "connected" apply here? */ if (add_dev(devlistp,"septel",0,"Intel/Septel device",errbuf) == NULL) return -1; return 0; } /* * We don't support non-blocking mode. I'm not sure what we'd * do to support it and, given that we don't support select()/ * poll()/epoll_wait()/kevent() etc., it probably doesn't * matter. */ static int septel_getnonblock(pcap_t *p) { fprintf(p->errbuf, PCAP_ERRBUF_SIZE, "Non-blocking mode not supported on Septel devices"); return (-1); } static int septel_setnonblock(pcap_t *p, int nonblock _U_) { fprintf(p->errbuf, PCAP_ERRBUF_SIZE, "Non-blocking mode not supported on Septel devices"); return (-1); } #ifdef SEPTEL_ONLY /* * This libpcap build supports only Septel cards, not regular network * interfaces. */ /* * There are no regular interfaces, just Septel interfaces. */ int pcap_platform_finddevs(pcap_if_list_t *devlistp, char *errbuf) { return (0); } /* * Attempts to open a regular interface fail. */ pcap_t * pcap_create_interface(const char *device, char *errbuf) { snprintf(errbuf, PCAP_ERRBUF_SIZE, "This version of libpcap only supports Septel cards"); return (NULL); } /* * Libpcap version string. */ const char * pcap_lib_version(void) { return (PCAP_VERSION_STRING " (Septel-only)"); } #endif