/* * Copyright (c) 1990, 1991, 1992, 1993, 1994, 1995, 1996 * The Regents of the University of California. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that: (1) source code distributions * retain the above copyright notice and this paragraph in its entirety, (2) * distributions including binary code include the above copyright notice and * this paragraph in its entirety in the documentation or other materials * provided with the distribution, and (3) all advertising materials mentioning * features or use of this software display the following acknowledgement: * ``This product includes software developed by the University of California, * Lawrence Berkeley Laboratory and its contributors.'' Neither the name of * the University nor the names of its contributors may be used to endorse * or promote products derived from this software without specific prior * written permission. * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED * WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. * * Modifications made to accommodate the new SunOS4.0 NIT facility by * Micky Liu, micky@cunixc.cc.columbia.edu, Columbia University in May, 1989. * This module now handles the STREAMS based NIT. */ #ifdef HAVE_CONFIG_H #include #endif #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "pcap-int.h" #ifdef HAVE_OS_PROTO_H #include "os-proto.h" #endif /* * The chunk size for NIT. This is the amount of buffering * done for read calls. */ #define CHUNKSIZE (2*1024) /* * The total buffer space used by NIT. */ #define BUFSPACE (4*CHUNKSIZE) /* Forwards */ static int nit_setflags(int, int, int, char *); /* * Private data for capturing on STREAMS NIT devices. */ struct pcap_snit { struct pcap_stat stat; }; static int pcap_stats_snit(pcap_t *p, struct pcap_stat *ps) { struct pcap_snit *psn = p->priv; /* * "ps_recv" counts packets handed to the filter, not packets * that passed the filter. As filtering is done in userland, * this does not include packets dropped because we ran out * of buffer space. * * "ps_drop" counts packets dropped inside the "/dev/nit" * device because of flow control requirements or resource * exhaustion; it doesn't count packets dropped by the * interface driver, or packets dropped upstream. As filtering * is done in userland, it counts packets regardless of whether * they would've passed the filter. * * These statistics don't include packets not yet read from the * kernel by libpcap or packets not yet read from libpcap by the * application. */ *ps = psn->stat; return (0); } static int pcap_read_snit(pcap_t *p, int cnt, pcap_handler callback, u_char *user) { struct pcap_snit *psn = p->priv; register int cc, n; register u_char *bp, *cp, *ep; register struct nit_bufhdr *hdrp; register struct nit_iftime *ntp; register struct nit_iflen *nlp; register struct nit_ifdrops *ndp; register int caplen; cc = p->cc; if (cc == 0) { cc = read(p->fd, (char *)p->buffer, p->bufsize); if (cc < 0) { if (errno == EWOULDBLOCK) return (0); pcap_fmt_errmsg_for_errno(p->errbuf, sizeof(p->errbuf), errno, "pcap_read"); return (-1); } bp = (u_char *)p->buffer; } else bp = p->bp; /* * loop through each snapshot in the chunk */ n = 0; ep = bp + cc; while (bp < ep) { /* * Has "pcap_breakloop()" been called? * If so, return immediately - if we haven't read any * packets, clear the flag and return -2 to indicate * that we were told to break out of the loop, otherwise * leave the flag set, so that the *next* call will break * out of the loop without having read any packets, and * return the number of packets we've processed so far. */ if (p->break_loop) { if (n == 0) { p->break_loop = 0; return (-2); } else { p->bp = bp; p->cc = ep - bp; return (n); } } ++psn->stat.ps_recv; cp = bp; /* get past NIT buffer */ hdrp = (struct nit_bufhdr *)cp; cp += sizeof(*hdrp); /* get past NIT timer */ ntp = (struct nit_iftime *)cp; cp += sizeof(*ntp); ndp = (struct nit_ifdrops *)cp; psn->stat.ps_drop = ndp->nh_drops; cp += sizeof *ndp; /* get past packet len */ nlp = (struct nit_iflen *)cp; cp += sizeof(*nlp); /* next snapshot */ bp += hdrp->nhb_totlen; caplen = nlp->nh_pktlen; if (caplen > p->snapshot) caplen = p->snapshot; if (bpf_filter(p->fcode.bf_insns, cp, nlp->nh_pktlen, caplen)) { struct pcap_pkthdr h; h.ts = ntp->nh_timestamp; h.len = nlp->nh_pktlen; h.caplen = caplen; (*callback)(user, &h, cp); if (++n >= cnt && !PACKET_COUNT_IS_UNLIMITED(cnt)) { p->cc = ep - bp; p->bp = bp; return (n); } } } p->cc = 0; return (n); } static int pcap_inject_snit(pcap_t *p, const void *buf, size_t size) { struct strbuf ctl, data; /* * XXX - can we just do * ret = write(pd->f, buf, size); */ ctl.len = sizeof(*sa); /* XXX - what was this? */ ctl.buf = (char *)sa; data.buf = buf; data.len = size; ret = putmsg(p->fd, &ctl, &data); if (ret == -1) { pcap_fmt_errmsg_for_errno(p->errbuf, PCAP_ERRBUF_SIZE, errno, "send"); return (-1); } return (ret); } static int nit_setflags(pcap_t *p) { bpf_u_int32 flags; struct strioctl si; u_int zero = 0; struct timeval timeout; if (p->opt.immediate) { /* * Set the chunk size to zero, so that chunks get sent * up immediately. */ si.ic_cmd = NIOCSCHUNK; si.ic_len = sizeof(zero); si.ic_dp = (char *)&zero; if (ioctl(p->fd, I_STR, (char *)&si) < 0) { pcap_fmt_errmsg_for_errno(p->errbuf, PCAP_ERRBUF_SIZE, errno, "NIOCSCHUNK"); return (-1); } } si.ic_timout = INFTIM; if (p->opt.timeout != 0) { timeout.tv_sec = p->opt.timeout / 1000; timeout.tv_usec = (p->opt.timeout * 1000) % 1000000; si.ic_cmd = NIOCSTIME; si.ic_len = sizeof(timeout); si.ic_dp = (char *)&timeout; if (ioctl(p->fd, I_STR, (char *)&si) < 0) { pcap_fmt_errmsg_for_errno(p->errbuf, PCAP_ERRBUF_SIZE, errno, "NIOCSTIME"); return (-1); } } flags = NI_TIMESTAMP | NI_LEN | NI_DROPS; if (p->opt.promisc) flags |= NI_PROMISC; si.ic_cmd = NIOCSFLAGS; si.ic_len = sizeof(flags); si.ic_dp = (char *)&flags; if (ioctl(p->fd, I_STR, (char *)&si) < 0) { pcap_fmt_errmsg_for_errno(p->errbuf, PCAP_ERRBUF_SIZE, errno, "NIOCSFLAGS"); return (-1); } return (0); } static int pcap_activate_snit(pcap_t *p) { struct strioctl si; /* struct for ioctl() */ struct ifreq ifr; /* interface request struct */ int chunksize = CHUNKSIZE; int fd; static const char dev[] = "/dev/nit"; int err; if (p->opt.rfmon) { /* * No monitor mode on SunOS 4.x (no Wi-Fi devices on * hardware supported by SunOS 4.x). */ return (PCAP_ERROR_RFMON_NOTSUP); } /* * Turn a negative snapshot value (invalid), a snapshot value of * 0 (unspecified), or a value bigger than the normal maximum * value, into the maximum allowed value. * * If some application really *needs* a bigger snapshot * length, we should just increase MAXIMUM_SNAPLEN. */ if (p->snapshot <= 0 || p->snapshot > MAXIMUM_SNAPLEN) p->snapshot = MAXIMUM_SNAPLEN; if (p->snapshot < 96) /* * NIT requires a snapshot length of at least 96. */ p->snapshot = 96; /* * Initially try a read/write open (to allow the inject * method to work). If that fails due to permission * issues, fall back to read-only. This allows a * non-root user to be granted specific access to pcap * capabilities via file permissions. * * XXX - we should have an API that has a flag that * controls whether to open read-only or read-write, * so that denial of permission to send (or inability * to send, if sending packets isn't supported on * the device in question) can be indicated at open * time. */ p->fd = fd = open(dev, O_RDWR); if (fd < 0 && errno == EACCES) p->fd = fd = open(dev, O_RDONLY); if (fd < 0) { if (errno == EACCES) err = PCAP_ERROR_PERM_DENIED; else err = PCAP_ERROR; pcap_fmt_errmsg_for_errno(p->errbuf, PCAP_ERRBUF_SIZE, errno, "%s", dev); goto bad; } /* arrange to get discrete messages from the STREAM and use NIT_BUF */ if (ioctl(fd, I_SRDOPT, (char *)RMSGD) < 0) { pcap_fmt_errmsg_for_errno(p->errbuf, PCAP_ERRBUF_SIZE, errno, "I_SRDOPT"); err = PCAP_ERROR; goto bad; } if (ioctl(fd, I_PUSH, "nbuf") < 0) { pcap_fmt_errmsg_for_errno(p->errbuf, PCAP_ERRBUF_SIZE, errno, "push nbuf"); err = PCAP_ERROR; goto bad; } /* set the chunksize */ si.ic_cmd = NIOCSCHUNK; si.ic_timout = INFTIM; si.ic_len = sizeof(chunksize); si.ic_dp = (char *)&chunksize; if (ioctl(fd, I_STR, (char *)&si) < 0) { pcap_fmt_errmsg_for_errno(p->errbuf, PCAP_ERRBUF_SIZE, errno, "NIOCSCHUNK"); err = PCAP_ERROR; goto bad; } /* request the interface */ strncpy(ifr.ifr_name, p->opt.device, sizeof(ifr.ifr_name)); ifr.ifr_name[sizeof(ifr.ifr_name) - 1] = '\0'; si.ic_cmd = NIOCBIND; si.ic_len = sizeof(ifr); si.ic_dp = (char *)𝔦 if (ioctl(fd, I_STR, (char *)&si) < 0) { /* * XXX - is there an error that means "no such device"? * Is there one that means "that device doesn't support * STREAMS NIT"? */ pcap_fmt_errmsg_for_errno(p->errbuf, PCAP_ERRBUF_SIZE, errno, "NIOCBIND: %s", ifr.ifr_name); err = PCAP_ERROR; goto bad; } /* set the snapshot length */ si.ic_cmd = NIOCSSNAP; si.ic_len = sizeof(p->snapshot); si.ic_dp = (char *)&p->snapshot; if (ioctl(fd, I_STR, (char *)&si) < 0) { pcap_fmt_errmsg_for_errno(p->errbuf, PCAP_ERRBUF_SIZE, errno, "NIOCSSNAP"); err = PCAP_ERROR; goto bad; } if (nit_setflags(p) < 0) { err = PCAP_ERROR; goto bad; } (void)ioctl(fd, I_FLUSH, (char *)FLUSHR); /* * NIT supports only ethernets. */ p->linktype = DLT_EN10MB; p->bufsize = BUFSPACE; p->buffer = malloc(p->bufsize); if (p->buffer == NULL) { pcap_fmt_errmsg_for_errno(p->errbuf, PCAP_ERRBUF_SIZE, errno, "malloc"); err = PCAP_ERROR; goto bad; } /* * "p->fd" is an FD for a STREAMS device, so "select()" and * "poll()" should work on it. */ p->selectable_fd = p->fd; /* * This is (presumably) a real Ethernet capture; give it a * link-layer-type list with DLT_EN10MB and DLT_DOCSIS, so * that an application can let you choose it, in case you're * capturing DOCSIS traffic that a Cisco Cable Modem * Termination System is putting out onto an Ethernet (it * doesn't put an Ethernet header onto the wire, it puts raw * DOCSIS frames out on the wire inside the low-level * Ethernet framing). */ p->dlt_list = (u_int *) malloc(sizeof(u_int) * 2); /* * If that fails, just leave the list empty. */ if (p->dlt_list != NULL) { p->dlt_list[0] = DLT_EN10MB; p->dlt_list[1] = DLT_DOCSIS; p->dlt_count = 2; } p->read_op = pcap_read_snit; p->inject_op = pcap_inject_snit; p->setfilter_op = install_bpf_program; /* no kernel filtering */ p->setdirection_op = NULL; /* Not implemented. */ p->set_datalink_op = NULL; /* can't change data link type */ p->getnonblock_op = pcap_getnonblock_fd; p->setnonblock_op = pcap_setnonblock_fd; p->stats_op = pcap_stats_snit; return (0); bad: pcap_cleanup_live_common(p); return (err); } pcap_t * pcap_create_interface(const char *device _U_, char *ebuf) { pcap_t *p; p = pcap_create_common(ebuf, sizeof (struct pcap_snit)); if (p == NULL) return (NULL); p->activate_op = pcap_activate_snit; return (p); } /* * XXX - there's probably a NIOCBIND error that means "that device * doesn't support NIT"; if so, we should try an NIOCBIND and use that. */ static int can_be_bound(const char *name _U_) { return (1); } static int get_if_flags(const char *name _U_, bpf_u_int32 *flags _U_, char *errbuf _U_) { /* * Nothing we can do. * XXX - is there a way to find out whether an adapter has * something plugged into it? */ return (0); } int pcap_platform_finddevs(pcap_if_list_t *devlistp, char *errbuf) { return (pcap_findalldevs_interfaces(devlistp, errbuf, can_be_bound, get_if_flags)); } /* * Libpcap version string. */ const char * pcap_lib_version(void) { return (PCAP_VERSION_STRING); }