local bin = require "bin" local bit = require "bit" local ipOps = require "ipOps" local math = require "math" local nmap = require "nmap" local packet = require "packet" local shortport = require "shortport" local stdnse = require "stdnse" local string = require "string" local table = require "table" author = "jah" license = "Same as Nmap--See https://nmap.org/book/man-legal.html" categories = {"discovery", "intrusive"} description = [[ Obtains and prints an NTP server's monitor data. Monitor data is a list of the most recently used (MRU) having NTP associations with the target. Each record contains information about the most recent NTP packet sent by a host to the target including the source and destination addresses and the NTP version and mode of the packet. With this information it is possible to classify associated hosts as Servers, Peers, and Clients. A Peers command is also sent to the target and the peers list in the response allows differentiation between configured Mode 1 Peers and clients which act like Peers (such as the Windows W32Time service). Associated hosts are further classified as either public or private. Private hosts are those having IP addresses which are not routable on the public Internet and thus can help to form a picture about the topology of the private network on which the target resides. Other information revealed by the monlist and peers commands are the host with which the target clock is synchronized and hosts which send Control Mode (6) and Private Mode (7) commands to the target and which may be used by admins for the NTP service. It should be noted that the very nature of the NTP monitor data means that the Mode 7 commands sent by this script are recorded by the target (and will often appear in these results). Since the monitor data is a MRU list, it is probable that you can overwrite the record of the Mode 7 command by sending an innocuous looking Client Mode request. This can be achieved easily using Nmap: nmap -sU -pU:123 -Pn -n --max-retries=0 Notes: * The monitor list in response to the monlist command is limited to 600 associations. * The monitor capability may not be enabled on the target in which case you may receive an error number 4 (No Data Available). * There may be a restriction on who can perform Mode 7 commands (e.g. "restrict noquery" in ntp.conf) in which case you may not receive a reply. * This script does not handle authenticating and targets expecting auth info may respond with error number 3 (Format Error). ]] --- -- @usage -- nmap -sU -pU:123 -Pn -n --script=ntp-monlist -- -- @output -- PORT STATE SERVICE REASON -- 123/udp open ntp udp-response -- | ntp-monlist: -- | Target is synchronised with 127.127.38.0 (reference clock) -- | Alternative Target Interfaces: -- | 10.17.4.20 -- | Private Servers (0) -- | Public Servers (0) -- | Private Peers (0) -- | Public Peers (0) -- | Private Clients (2) -- | 10.20.8.69 169.254.138.63 -- | Public Clients (597) -- | 4.79.17.248 68.70.72.194 74.247.37.194 99.190.119.152 -- | ... -- | 12.10.160.20 68.80.36.133 75.1.39.42 108.7.58.118 -- | 68.56.205.98 -- | 2001:1400:0:0:0:0:0:1 2001:16d8:dd00:38:0:0:0:2 -- | 2002:db5a:bccd:1:21d:e0ff:feb7:b96f 2002:b6ef:81c4:0:0:1145:59c5:3682 -- | Other Associations (1) -- |_ 127.0.0.1 seen 1949869 times. last tx was unicast v2 mode 7 -- This script uses the NTP sequence numbers and the 'more' bit found in -- response packets in order to determine when to stop the reception loop. It -- would be possible for a malicious target to tie-up this script by sending -- a continuous stream of UDP datagrams. -- Therefore MAXIMUM_EVIL has been defined to limit the number of malformed or -- duplicate packets that will be processed before a target is rejected and -- MAX_RECORDS simply limits the storage of valid looking NTP data to a sane -- level. local MAXIMUM_EVIL = 25 local MAX_RECORDS = 1200 local TIMEOUT = 5000 -- ms --- -- ntp-monlist will run against the ntp service which only runs on UDP 123 -- portrule = shortport.port_or_service(123, 'ntp', {'udp'}) --- -- Send an NTPv2 Mode 7 'monlist' command to the target, receive any responses -- and parse records from those responses. If the target responds favourably -- then send a 'peers' command and parse the responses. Finally, categorise the -- discovered NTP associations (hosts) and output the interpreted results. -- action = function(host, port) -- Define the request code and implementation numbers of the NTP request to -- send to the target. local REQ_MON_GETLIST_1 = 42 local REQ_PEER_LIST = 0 local IMPL_XNTPD = 3 -- parsed records will be stored in this table. local records = {['peerlist'] = {}} -- send monlist command and fill the records table with the responses. local inum, rcode = IMPL_XNTPD, REQ_MON_GETLIST_1 local sock = doquery(nil, host, port, inum, rcode, records) -- end here if there are zero records. if #records == 0 then if sock then sock:close() end return nil end -- send peers command and add the responses to records.peerlist. rcode = REQ_PEER_LIST sock = doquery(sock, host, port, inum, rcode, records) if sock then sock:close() end -- now we can interpret the collected records. local interpreted = interpret(records, host.ip) -- output. return summary(interpreted) end --- -- Sends NTPv2 Mode 7 requests to the target, receives any responses and parses -- records from those responses. -- -- @param sock Socket object which must be supplied in a connected state. -- nil may be supplied instead and a socket will be created. -- @param host Nmap host table for the target. -- @param port Nmap port table for the target. -- @param inum NTP implementation number (i.e. 0, 2 or 3). -- @param rcode NTP Mode 7 request code (e.g. 42 for 'monlist'). -- @param records Table in which to store records parsed from responses. -- @return sock Socket object connected to the target. -- function doquery(sock, host, port, inum, rcode, records) local target = ('%s%s%d'):format( host.ip, host.ip:match(':') and '.' or ':', port.number ) records.badpkts = records.badpkts or 0 records.peerlist = records.peerlist or {} if #records + #records.peerlist >= MAX_RECORDS then stdnse.debug1('MAX_RECORDS has been reached for target %s - only processing what we have already!', target) if sock then sock:close() end return nil end -- connect a new socket if one wasn't supplied if not sock then sock = nmap.new_socket() sock:set_timeout(TIMEOUT) local constatus, conerr = sock:connect(host, port) if not constatus then stdnse.debug1('Error establishing a UDP connection for %s - %s', target, conerr) return nil end end -- send stdnse.debug2('Sending NTPv2 Mode 7 Request %d Implementation %d to %s.', rcode, inum, target) local ntpData = getPrivateMode(inum, rcode) local sendstatus, senderr = sock:send(ntpData) if not sendstatus then stdnse.debug1('Error sending NTP request to %s:%d - %s', host.ip, port.number, senderr) sock:close() return nil end local track = { ['evil_pkts'] = records.badpkts, -- a count of bad packets ['hseq'] = -1, -- highest received seq number ['mseq'] = '|', -- missing seq numbers ['errcond'] = false, -- true if sock, ntp or sane response error exists ['rcv_again'] = false, -- true if we should receive_bytes again (more bit is set or missing seq). ['target'] = target, -- target ip and port ['v'] = 2, -- ntp version ['m'] = 7, -- ntp mode ['c'] = rcode, -- ntp request code ['i'] = inum -- ntp request implementation number } -- receive and parse repeat -- receive any response local rcvstatus, response = sock:receive_bytes(1) -- check the response local packet_to_parse = check(rcvstatus, response, track) -- parse the response if not track.errcond then local remain = parse_v2m7(packet_to_parse, records) if remain > 0 then stdnse.debug1('MAX_RECORDS has been reached while parsing NTPv2 Mode 7 Code %d responses from the target %s.', rcode, target) track.rcv_again = false elseif remain == -1 then stdnse.debug1('Parsing of NTPv2 Mode 7 implementation number %d request code %d response from %s has not been implemented.', inum, rcode, target) track.rcv_again = false end end records.badpkts = records.badpkts + track.evil_pkts if records.badpkts >= MAXIMUM_EVIL then stdnse.debug1('Had %d bad packets from %s - Not continuing with this host!', target, records.badpkts) sock:close() return nil end until not track.rcv_again return sock end --- -- Generates an NTP Private Mode (7) request with the supplied implementation -- number and request code. -- -- @param impl number - valid values are 0, 2 and 3 - defaults to 3 -- @param requestCode number - defaults to 42 -- @return String request. -- function getPrivateMode(impl, requestCode) local pay -- udp payload is 48 bytes. -- For a description of Mode 7 packets see NTP source file: -- include/ntp_request.h -- -- Flags 8bits: 0x17 -- (Response Bit: 0, More Bit: 0, Version Number 3bits: 2, Mode 3bits: 7) -- Authenticated Bit: 0, Sequence Number 7bits: 0 -- Implementation Number 8bits: e.g. 0x03 (IMPL_XNTPD) -- Request Code 8bits: e.g. 0x2a (MON_GETLIST_1) -- Err 4bits: 0, Number of Data Items 12bits: 0 -- MBZ 4bits: 0, Size of Data Items 12bits: 0 return string.char( 0x17, 0x00, impl or 0x03, requestCode or 0x2a, 0x00, 0x00, 0x00, 0x00 ) -- Data 40 Octets: 0 .. ("\x00"):rep(40) -- The following are optional if the Authenticated bit is set: -- Encryption Keyid 4 Octets: 0 -- Message Authentication Code 16 Octets (MD5): 0 end --- -- Checks that the response from the target is a valid NTP response. -- -- Starts by checking that the socket read was successful and then creates a -- packet object from the response (with dummy IP and UDP headers). Then -- perform checks that ensure that the response is of the expected type and -- length, that the records in the response are of the correct size and that -- the response is part of a sequence of 1 or more responses and is not a -- duplicate. -- -- @param status boolean returned from a socket read operation. -- @param response string response returned from a socket operation. -- @param track table used for tracking a sequence of NTP responses. -- @return A Packet object ready for parsing or -- nil if the response does not pass all checks. -- function check(status, response, track) -- check for socket error if not status then track.errcond = true track.rcv_again = false if track.rcv_again then -- we were expecting more responses stdnse.debug1('Socket error while reading from %s - %s', track.target, response) end return nil end -- reset flags track.errcond = false track.rcv_again = false -- create a packet object local pkt = make_udp_packet(response) if pkt == nil then track.errcond = true track.evil_pkts = track.evil_pkts+1 stdnse.debug1('Failed to create a Packet object with response from %s', track.target) return nil end -- off is the start of udp payload i.e. NTP local off = 28 -- NTP sanity checks local val -- NTP data must be at least 8 bytes val = response:len() if val < 8 then track.errcond = true track.evil_pkts = track.evil_pkts+1 stdnse.debug1('Expected a response of at least 8 bytes from %s, got %d bytes.', track.target, val) return nil end -- response bit set if bit.rshift(pkt:u8(off), 7) ~= 1 then track.errcond = true track.evil_pkts = track.evil_pkts+1 stdnse.debug1('Bad response from %s - did not have response bit set.', track.target) return nil end -- version is as expected val = bit.band(bit.rshift(pkt:u8(off), 3), 0x07) if val ~= track.v then track.errcond = true track.evil_pkts = track.evil_pkts+1 stdnse.debug1('Bad response from %s - expected NTP version %d, got %d', track.target, track.v, val) return nil end -- mode is as expected val = bit.band(pkt:u8(off), 0x07) if val ~= track.m then track.errcond = true track.evil_pkts = track.evil_pkts+1 stdnse.debug1('Bad response from %s - expected NTP mode %d, got %d', track.target, track.m, val) return nil end -- implementation number is as expected val = pkt:u8(off+2) if val ~= track.i then track.errcond = true track.evil_pkts = track.evil_pkts+1 stdnse.debug1('Bad response from %s - expected NTP implementation number %d, got %d', track.target, track.i, val) return nil end -- request code is as expected val = pkt:u8(off+3) if val ~= track.c then track.errcond = true track.evil_pkts = track.evil_pkts+1 stdnse.debug1('Bad response from %s - expected NTP request code %d got %d.', track.target, track.c, val) return nil end -- NTP error conditions - defined codes are not evil (bogus codes are). local fail, msg = false local err = bit.band(bit.rshift(pkt:u8(off+4), 4), 0x0f) if err == 0 then -- NoOp elseif err == 1 then fail = true msg = 'Incompatible Implementation Number' elseif err == 2 then fail = true msg = 'Unimplemented Request Code' elseif err == 3 then fail = true msg = 'Format Error' -- could be that auth is required - we didn't provide it. elseif err == 4 then fail = true msg = 'No Data Available' -- monitor not enabled or nothing in mru list. elseif err == 5 or err == 6 then fail = true msg = 'I don\'t know' elseif err == 7 then fail = true msg = 'Authentication Failure' elseif err > 7 then fail = true track.evil_pkts = track.evil_pkts+1 msg = 'Bogus Error Code!' -- should not happen... end if fail then track.errcond = true stdnse.debug1('Response from %s was NTP Error Code %d - "%s"', track.target, err, msg) return nil end -- length checks - the data (number of items * size of an item) should be -- 8 <= data <= 500 and each data item should be of correct length for the -- implementation and request type. -- Err 4 bits, Number of Data Items 12 bits local icount = bit.band(pkt:u16(off+4), 0xFFF) -- MBZ 4 bits, Size of Data Items: 12 bits local isize = bit.band(pkt:u16(off+6), 0xFFF) if icount < 1 then track.errcond = true track.evil_pkts = track.evil_pkts+1 stdnse.debug1('Expected at least one record from %s.', track.target) return nil elseif icount*isize + 8 > response:len() then track.errcond = true track.evil_pkts = track.evil_pkts+1 stdnse.debug1('NTP Mode 7 response from %s has invalid count (%d) and/or size (%d) values.', track.target, icount, isize) return nil elseif icount*isize > 500 then track.errcond = true track.evil_pkts = track.evil_pkts+1 stdnse.debug1('NTP Mode 7 data section is larger than 500 bytes (%d) in response from %s.', icount*isize, track.target) return nil end if track.c == 42 and track.i == 3 and isize ~= 72 then track.errcond = true track.evil_pkts = track.evil_pkts+1 stdnse.debug1( 'Expected item size of 72 bytes (got %d) for request code 42 implementation number 3 in response from %s.', isize, track.target ) return nil elseif track.c == 0 and track.i == 3 and isize ~= 32 then track.errcond = true track.evil_pkts = track.evil_pkts+1 stdnse.debug1( 'Expected item size of 32 bytes (got %d) for request code 0 implementation number 3 in response from %s.', isize, track.target ) return nil end -- is the response out of sequence, a duplicate or is it peachy local seq = bit.band(pkt:u8(off+1), 0x7f) if seq == track.hseq+1 then -- all good track.hseq = track.hseq+1 elseif track.mseq:match(('|%d|'):format(seq)) then -- one of our missing seq# track.mseq:gsub(('|%d|'):format(seq), '|', 1) stdnse.debug3('Response from %s with sequence number %s was previously missing.', -- this never seems to happen! track.target, seq ) elseif seq > track.hseq then -- some seq# have gone missing for i=track.hseq+1, seq-1 do track.mseq = ('%s%d|'):format(track.mseq, i) end stdnse.debug3( 'Response from %s was out of sequence - expected #%d but got #%d (missing:%s)', track.target, track.hseq+1, seq, track.mseq ) track.hseq = seq else -- seq <= hseq !duplicate! track.evil_pkts = track.evil_pkts+1 stdnse.debug1( 'Response from %s had a duplicate sequence number - dropping it.', track.target ) return nil end -- if the more bit is set or if we have missing sequence numbers then we'll -- want to receive more packets after parsing this one. local more = bit.band(bit.rshift(pkt:u8(off), 6), 0x01) if more == 1 then track.rcv_again = true elseif track.mseq:len() > 1 then track.rcv_again = true end return pkt end --- -- Returns a Packet Object generated with dummy IP and UDP headers and the -- supplied UDP payload so that the payload may be conveniently parsed using -- packet library methods. The dummy headers contain the barest information -- needed to appear valid to packet.lua -- -- @param response String UDP payload. -- @return Packet object or nil in case of an error. -- function make_udp_packet(response) -- udp len local udplen = 8 + response:len() -- ip len local iplen = 20 + udplen -- dummy headers -- ip local dh = "\x45\x00" -- IPv4, 20-byte header, no DSCP, no ECN .. bin.pack('>S', iplen) -- total length .. "\x00\x00" -- IPID 0 .. "\x40\x00" -- DF .. "\x40\x11" -- TTL 0x40, UDP (proto 17) .. "\x00\x00" -- checksum 0 .. "\x00\x00\x00\x00\x00\x00\x00\x00" -- Source, destination 0.0.0.0 .. "\x00\x00\x00\x00" -- UDP source, dest port 0 .. bin.pack('S', udplen) -- UDP length .. "\x00\x00" -- UDP checksum 0 return packet.Packet:new(dh .. response, iplen) end --- -- Invokes parsing routines for NTPv2 Mode 7 response packets based on the -- implementation number and request code defined in the response. -- -- @param pkt Packet Object to be parsed. -- @param recs Table to hold the accumulated records parsed from supplied -- packet objects. -- @return Number of records not parsed from the packet (usually zero) or -- -1 if the response does not have an associated parsing routine. -- function parse_v2m7(pkt, recs) local off = pkt.udp_offset + 8 local impl = pkt:u8(off+2) local code = pkt:u8(off+3) if (impl == 3 or impl == 2) and code == 42 then return parse_monlist_1(pkt, recs) elseif (impl == 3 or impl == 2) and code == 0 then return parse_peerlist(pkt, recs) else return -1 end end --- -- Parsed records from the supplied monitor list packet into the supplied table -- of accumulated records. -- -- The supplied response packets should be NTPv2 Mode 7 implementation number 2 -- or 3 and request code 42. -- The fields parsed are the source and destination IP addresses, the count of -- times the target has seen the host, the method of transmission (uni|broad| -- multicast), NTP Version and Mode of the last packet received by the target -- from the host. -- -- @param pkt Packet object to extract monitor records from. -- @param recs A table of accumulated monitor records for storage of parsed -- records. -- @return Number of records not parsed from the packet which will be zero -- except when MAX_RECORDS is reached. -- function parse_monlist_1(pkt, recs) local off = pkt.udp_offset + 8 -- beginning of NTP local icount = bit.band(pkt:u16(off+4), 0xFFF) local isize = bit.band(pkt:u16(off+6), 0xFFF) local remaining = icount off = off+8 -- beginning of data section for i=1, icount, 1 do if #recs + #recs.peerlist >= MAX_RECORDS then return remaining end local pos = off + isize * (i-1) -- beginning of item local t = {} -- src and dst addresses -- IPv4 if impl == 2 or v6 flag is not set if isize == 32 or pkt:u8(pos+32) ~= 1 then -- IPv4 local saddr = ipOps.str_to_ip(pkt:raw(pos+16, 4)) local daddr = ipOps.str_to_ip(pkt:raw(pos+20, 4)) t.saddr = saddr t.daddr = daddr else -- IPv6 local saddr = {} for j=40, 54, 2 do saddr[#saddr+1] = stdnse.tohex(pkt:u16(pos+j)) end t.saddr = table.concat(saddr, ':') local daddr = {} for j=56, 70, 2 do daddr[#daddr+1] = stdnse.tohex(pkt:u16(pos+j)) end t.daddr = table.concat(daddr, ':') end t.count = pkt:u32(pos+12) t.flags = pkt:u32(pos+24) -- I've seen flags be wrong-endian just once. why? I really don't know. -- Some implementations are not doing htonl for this field? if t.flags > 0xFFFFFF then -- only concerned with the high order byte t.flags = bit.rshift(t.flags, 24) end t.mode = pkt:u8(pos+30) t.version = pkt:u8(pos+31) recs[#recs+1] = t remaining = remaining -1 end return remaining end --- -- Parsed records from the supplied peer list packet into the supplied table of -- accumulated records. -- -- The supplied response packets should be NTPv2 Mode 7 implementation number 2 -- or 3 and request code 0. -- The fields parsed are the source IP address and the peer information flag. -- -- @param pkt Packet object to extract peer records from. -- @param recs A table of accumulated monitor and peer records for storage of -- parsed records. -- @return Number of records not parsed from the packet which will be zero -- except when MAX_RECORDS is reached. -- function parse_peerlist(pkt, recs) local off = pkt.udp_offset + 8 -- beginning of NTP local icount = bit.band(pkt:u16(off+4), 0xFFF) local isize = bit.band(pkt:u16(off+6), 0xFFF) local remaining = icount off = off+8 -- beginning of data section for i=0, icount-1, 1 do if #recs + #recs.peerlist >= MAX_RECORDS then return remaining end local pos = off + (i * isize) -- beginning of item local t = {} -- src address -- IPv4 if impl == 2 or v6 flag is not set if isize == 8 or pkt:u8(pos+8) ~= 1 then local saddr = ipOps.str_to_ip(pkt:raw(pos, 4)) t.saddr = saddr else -- IPv6 local saddr = {} for j=16, 30, 2 do saddr[#saddr+1] = stdnse.tohex(pkt:u16(pos+j)) end t.saddr = table.concat(saddr, ':') end t.flags = pkt:u8(pos+7) table.insert(recs.peerlist, t) remaining = remaining -1 end return remaining end --- -- Interprets the supplied records to discover information about the target -- NTP associations. -- -- Associations are categorised as NTP Servers, Peers and Clients based on the -- Mode of packets sent to the target. Alternative target interfaces are -- recorded as well as the transmission mode of packets sent to the target (i.e. -- unicast, broadcast or multicast). -- -- @param recs A table of accumulated monitor and peer records for storage -- of parsed records. -- @param targetip String target IP address (e.g. host.ip) -- @return Table of interpreted results with fields such as servs, clients, -- peers, ifaces etc. -- function interpret(recs, targetip) local txtyp = { ['1'] = 'unicast', ['2'] = 'broadcast', ['4'] = 'multicast' } local t = {} t.servs = {['pub']={['4']={},['6']={}}, ['prv']={['4']={},['6']={}}} t.peers = {['pub']={['4']={},['6']={}}, ['prv']={['4']={},['6']={}}} t.porc = {['pub']={['4']={},['6']={}}, ['prv']={['4']={},['6']={}}} t.clients = {['pub']={['4']={},['6']={}}, ['prv']={['4']={},['6']={}}} t.casts = {['b']={['4']={},['6']={}}, ['m']={['4']={},['6']={}}} t.ifaces = {['4']={},['6']={}} t.other = {} t.sync = '' if #recs.peerlist > 0 then t.have_peerlist = true recs.peerhash = {} for _, peer in ipairs(recs.peerlist) do recs.peerhash[peer.saddr] = peer end else t.have_peerlist = false end for _, r in ipairs(recs) do local vis = ipOps.isPrivate(r.saddr) and 'prv' or 'pub' local af = r.saddr:match(':') and '6' or '4' -- is the host a client, peer, server or other? if r.mode == 3 then table.insert(t.clients[vis][af], r.saddr) elseif r.mode == 4 then table.insert(t.servs[vis][af], r.saddr) elseif r.mode == 2 then table.insert(t.peers[vis][af], r.saddr) elseif r.mode == 1 then -- if we have a list of peers we can distinguish between mode 1 peers and -- mode 1 peers that are really clients (i.e. not configured as peers). if t.have_peerlist then if recs.peerhash[r.saddr] then table.insert(t.peers[vis][af], r.saddr) else table.insert(t.clients[vis][af], r.saddr) end else table.insert(t.porc[vis][af], r.saddr) end elseif r.mode == 5 then table.insert(t.servs[vis][af], r.saddr) else local tx = tostring(r.flags) table.insert( t.other, ('%s%s seen %d time%s. last tx was %s v%d mode %d'):format( r.saddr, _ == 1 and ' (You?)' or '', r.count, r.count > 1 and 's' or '', txtyp[tx] or tx, r.version, r.mode ) ) end local function isLoopback(addr) if addr:match(':') then if ipOps.compare_ip(addr, 'eq', '::1') then return true end elseif addr:match('^127') then return true end return false end -- destination addresses are target interfaces or broad/multicast addresses. if not isLoopback(r.daddr) then if r.flags == 1 then t.ifaces[af][r.daddr] = r.daddr elseif r.flags == 2 then t.casts.b[af][r.daddr] = r.daddr elseif r.flags == 4 then t.casts.m[af][r.daddr] = r.daddr else -- shouldn't happen stdnse.debug1( 'Host associated with %s had transmission flag value %d - Strange!', targetip, r.flags ) end end end -- for local function isTarget(addr, target) local targ_af = target:match(':') and 6 or 4 local test_af = addr:match(':') and 6 or 4 if test_af ~= targ_af then return false end if targ_af == 4 and addr == target then return true end if targ_af == 6 and (ipOps.compare_ip(addr, 'eq', target)) then return true end return false end -- reorganise ifaces and casts tables local _ = {} for k, v in pairs(t.ifaces['4']) do if not isTarget(v, targetip) then _[#_+1] = v end end t.ifaces['4'] = _ _ = {} for k, v in pairs(t.ifaces['6']) do if not isTarget(v, targetip) then _[#_+1] = v end end t.ifaces['6'] = _ _ = {} for k, v in pairs(t.casts.b['4']) do _[#_+1] = v end t.casts.b['4'] = _ _ = {} for k, v in pairs(t.casts.b['6']) do _[#_+1] = v end t.casts.b['6'] = _ _ = {} for k, v in pairs(t.casts.m['4']) do _[#_+1] = v end t.casts.m['4'] = _ _ = {} for k, v in pairs(t.casts.m['6']) do _[#_+1] = v end t.casts.m['6'] = _ -- Single out the server to which the target is synched. -- Note that this server may not even appear in the monlist - it depends how -- busy the server is. if t.have_peerlist then for _, peer in ipairs(recs.peerlist) do if bit.band(peer.flags, 0x2) == 0x2 then t.sync = peer.saddr if peer.saddr:match('^127') then -- always IPv4, never IPv6! t.sync = t.sync .. ' (reference clock)' end break end end end return t end --- -- Outputs the supplied table of interpreted records. -- -- @param t Table of interpreted records as returned from interpret(). -- @return String script output. -- function summary(t) local o = {} local count = 0 local vbs = nmap.verbosity() -- Target is Synchronised with: if t.sync ~= '' then table.insert(o, ('Target is synchronised with %s'):format(t.sync)) end -- Alternative Target Interfaces if #t.ifaces['4'] > 0 or #t.ifaces['6'] > 0 then table.insert(o, { ['name'] = 'Alternative Target Interfaces:', output_ips(t.ifaces) } ) end -- Target listens to Broadcast Addresses if #t.casts.b['4'] > 0 or #t.casts.b['6'] > 0 then table.insert(o, { ['name'] = 'Target listens to Broadcast Addresses:', output_ips(t.casts.b) } ) end -- Target listens to Multicast Addresses if #t.casts.m['4'] > 0 or #t.casts.m['6'] > 0 then table.insert(o, { ['name'] = 'Target listens to Multicast Addresses:', output_ips(t.casts.m) } ) end -- Private Servers count = #t.servs.prv['4']+#t.servs.prv['6'] if count > 0 or vbs > 1 then table.insert(o, { ['name'] = ('Private Servers (%d)'):format(count), output_ips(t.servs.prv) } ) end -- Public Servers count = #t.servs.pub['4']+#t.servs.pub['6'] if count > 0 or vbs > 1 then table.insert(o, { ['name'] = ('Public Servers (%d)'):format(count), output_ips(t.servs.pub) } ) end -- Private Peers count = #t.peers.prv['4']+#t.peers.prv['6'] if count > 0 or vbs > 1 then table.insert(o, { ['name'] = ('Private Peers (%d)'):format(count), output_ips(t.peers.prv) } ) end -- Public Peers count = #t.peers.pub['4']+#t.peers.pub['6'] if count > 0 or vbs > 1 then table.insert(o, { ['name'] = ('Public Peers (%d)'):format(count), output_ips(t.peers.pub) } ) end -- Private Peers or Clients count = #t.porc.prv['4']+#t.porc.prv['6'] if not t.have_peerlist and (count > 0 or vbs > 1) then table.insert(o, { ['name'] = ('Private Peers or Clients (%d)'):format(count), output_ips(t.porc.prv) } ) end -- Public Peers or Clients count = #t.porc.pub['4']+#t.porc.pub['6'] if not t.have_peerlist and (count > 0 or vbs > 1) then table.insert(o, { ['name'] = ('Public Peers or Clients (%d)'):format(count), output_ips(t.porc.pub) } ) end -- Private Clients count = #t.clients.prv['4']+#t.clients.prv['6'] if count > 0 or vbs > 1 then table.insert(o, { ['name'] = ('Private Clients (%d)'):format(count), output_ips(t.clients.prv) } ) end -- Public Clients count = #t.clients.pub['4']+#t.clients.pub['6'] if count > 0 or vbs > 1 then table.insert(o, { ['name'] = ('Public Clients (%d)'):format(count), output_ips(t.clients.pub) } ) end -- Other count = #t.other if count > 0 then table.insert(o, { ['name'] = ('Other Associations (%d)'):format(count), t.other } ) end return stdnse.format_output(true, o) end --- -- Sorts and combines a set of IPv4 and IPv6 addresses into a table of rows. -- IPv4 addresses are ascending-sorted numerically and arranged in four columns -- and IPv6 appear in subsequent rows, sorted and arranged to fit as many -- addresses into a row as possible without the need for wrapping. -- -- @param t Table containing two subtables indexed as '4' and '6' containing -- a list of IPv4 and IPv6 addresses respectively. -- @return Table where each entry is a row of sorted and arranged IP addresses. -- function output_ips(t) if #t['4'] < 1 and #t['6'] < 1 then return nil end local o = {} -- sort and tabulate IPv4 addresses table.sort(t['4'], function(a,b) return ipOps.compare_ip(a, "lt", b) end) local limit = #t['4'] local cols = 4 local rows = math.ceil(limit/cols) local numlast = limit - cols*rows + cols local pad4 = (' '):rep(15) local index = 0 for c=1, cols, 1 do for r=1, rows, 1 do if r == rows and c > numlast then break end index = index+1 o[r] = o[r] or '' local padlen = pad4:len() - t['4'][index]:len() o[r] = ('%s%s%s '):format(o[r], t['4'][index], pad4:sub(1, padlen)) end end -- IPv6 -- Rows are allowed to be 71 chars wide table.sort(t['6'], function(a,b) return ipOps.compare_ip(a, "lt", b) end) local i = 1 local limit = #t['6'] while i <= limit do local work = {} local len = 0 local j = i repeat if not t['6'][j] then j = j-1; break end len = len + t['6'][j]:len() + 1 if len > 71 then j = j-1 else j = j+1 end until len > 71 for n = i, j, 1 do work[#work+1] = t['6'][n] end o[#o+1] = table.concat(work, ' ') i = j+1 end return o end