/*************************************************************************** * service_scan.cc -- Routines used for service fingerprinting to determine * * what application-level protocol is listening on a given port * * (e.g. snmp, http, ftp, smtp, etc.) * * * ***********************IMPORTANT NMAP LICENSE TERMS************************ * * * The Nmap Security Scanner is (C) 1996-2016 Insecure.Com LLC ("The Nmap * * Project"). Nmap is also a registered trademark of the Nmap Project. * * This program is free software; you may redistribute and/or modify it * * under the terms of the GNU General Public License as published by the * * Free Software Foundation; Version 2 ("GPL"), BUT ONLY WITH ALL OF THE * * CLARIFICATIONS AND EXCEPTIONS DESCRIBED HEREIN. This guarantees your * * right to use, modify, and redistribute this software under certain * * conditions. If you wish to embed Nmap technology into proprietary * * software, we sell alternative licenses (contact sales@nmap.com). * * Dozens of software vendors already license Nmap technology such as * * host discovery, port scanning, OS detection, version detection, and * * the Nmap Scripting Engine. * * * * Note that the GPL places important restrictions on "derivative works", * * yet it does not provide a detailed definition of that term. To avoid * * misunderstandings, we interpret that term as broadly as copyright law * * allows. For example, we consider an application to constitute a * * derivative work for the purpose of this license if it does any of the * * following with any software or content covered by this license * * ("Covered Software"): * * * * o Integrates source code from Covered Software. * * * * o Reads or includes copyrighted data files, such as Nmap's nmap-os-db * * or nmap-service-probes. * * * * o Is designed specifically to execute Covered Software and parse the * * results (as opposed to typical shell or execution-menu apps, which will * * execute anything you tell them to). * * * * o Includes Covered Software in a proprietary executable installer. The * * installers produced by InstallShield are an example of this. Including * * Nmap with other software in compressed or archival form does not * * trigger this provision, provided appropriate open source decompression * * or de-archiving software is widely available for no charge. For the * * purposes of this license, an installer is considered to include Covered * * Software even if it actually retrieves a copy of Covered Software from * * another source during runtime (such as by downloading it from the * * Internet). * * * * o Links (statically or dynamically) to a library which does any of the * * above. * * * * o Executes a helper program, module, or script to do any of the above. * * * * This list is not exclusive, but is meant to clarify our interpretation * * of derived works with some common examples. Other people may interpret * * the plain GPL differently, so we consider this a special exception to * * the GPL that we apply to Covered Software. Works which meet any of * * these conditions must conform to all of the terms of this license, * * particularly including the GPL Section 3 requirements of providing * * source code and allowing free redistribution of the work as a whole. * * * * As another special exception to the GPL terms, the Nmap Project grants * * permission to link the code of this program with any version of the * * OpenSSL library which is distributed under a license identical to that * * listed in the included docs/licenses/OpenSSL.txt file, and distribute * * linked combinations including the two. * * * * The Nmap Project has permission to redistribute Npcap, a packet * * capturing driver and library for the Microsoft Windows platform. * * Npcap is a separate work with it's own license rather than this Nmap * * license. Since the Npcap license does not permit redistribution * * without special permission, our Nmap Windows binary packages which * * contain Npcap may not be redistributed without special permission. * * * * Any redistribution of Covered Software, including any derived works, * * must obey and carry forward all of the terms of this license, including * * obeying all GPL rules and restrictions. For example, source code of * * the whole work must be provided and free redistribution must be * * allowed. All GPL references to "this License", are to be treated as * * including the terms and conditions of this license text as well. * * * * Because this license imposes special exceptions to the GPL, Covered * * Work may not be combined (even as part of a larger work) with plain GPL * * software. The terms, conditions, and exceptions of this license must * * be included as well. This license is incompatible with some other open * * source licenses as well. In some cases we can relicense portions of * * Nmap or grant special permissions to use it in other open source * * software. Please contact fyodor@nmap.org with any such requests. * * Similarly, we don't incorporate incompatible open source software into * * Covered Software without special permission from the copyright holders. * * * * If you have any questions about the licensing restrictions on using * * Nmap in other works, are happy to help. As mentioned above, we also * * offer alternative license to integrate Nmap into proprietary * * applications and appliances. These contracts have been sold to dozens * * of software vendors, and generally include a perpetual license as well * * as providing for priority support and updates. They also fund the * * continued development of Nmap. Please email sales@nmap.com for further * * information. * * * * If you have received a written license agreement or contract for * * Covered Software stating terms other than these, you may choose to use * * and redistribute Covered Software under those terms instead of these. * * * * Source is provided to this software because we believe users have a * * right to know exactly what a program is going to do before they run it. * * This also allows you to audit the software for security holes. * * * * Source code also allows you to port Nmap to new platforms, fix bugs, * * and add new features. You are highly encouraged to send your changes * * to the dev@nmap.org mailing list for possible incorporation into the * * main distribution. By sending these changes to Fyodor or one of the * * Insecure.Org development mailing lists, or checking them into the Nmap * * source code repository, it is understood (unless you specify * * otherwise) that you are offering the Nmap Project the unlimited, * * non-exclusive right to reuse, modify, and relicense the code. Nmap * * will always be available Open Source, but this is important because * * the inability to relicense code has caused devastating problems for * * other Free Software projects (such as KDE and NASM). We also * * occasionally relicense the code to third parties as discussed above. * * If you wish to specify special license conditions of your * * contributions, just say so when you send them. * * * * This program is distributed in the hope that it will be useful, but * * WITHOUT ANY WARRANTY; without even the implied warranty of * * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the Nmap * * license file for more details (it's in a COPYING file included with * * Nmap, and also available from https://svn.nmap.org/nmap/COPYING) * * * ***************************************************************************/ /* $Id$ */ #include "service_scan.h" #include "timing.h" #include "NmapOps.h" #include "nsock.h" #include "Target.h" #include "utils.h" #include "protocols.h" #include "nmap_tty.h" #include #if HAVE_OPENSSL /* OpenSSL 1.0.0 needs _WINSOCKAPI_ to be defined, otherwise it loads (through openssl/dtls1.h), which is incompatible with the that we use. (It creates errors with the redefinition of struct timeval, for example.) _WINSOCKAPI_ should be defined by our inclusion of , but it appears to be undefined somewhere, possibly in libpcap. */ #define _WINSOCKAPI_ #include #endif #if TIME_WITH_SYS_TIME # include # include #else # if HAVE_SYS_TIME_H # include # else # include # endif #endif #include #include extern NmapOps o; // Details on a particular service (open port) we are trying to match class ServiceNFO { public: ServiceNFO(AllProbes *AP); ~ServiceNFO(); // If a service response to a given probeName, this function adds // the response the the fingerprint for that service. The // fingerprint can be printed when nothing matches the service. You // can obtain the fingerprint (if any) via getServiceFingerprint(); void addToServiceFingerprint(const char *probeName, const u8 *resp, int resplen); // Get the service fingerprint. It is NULL if there is none, such // as if there was a match before any other probes were finished (or // if no probes gave back data). Note that this is plain // NUL-terminated ASCII data, although the length is optionally // available anyway. This function terminates the service fingerprint // with a semi-colon const char *getServiceFingerprint(int *flen); // Note that the next 2 members are for convenience and are not destroyed w/the ServiceNFO Target *target; // the port belongs to this target host // if a match is found, it is placed here. Otherwise NULL const char *probe_matched; // If a match is found, any product/version/info/hostname/ostype/devicetype // is placed in these 6 strings. Otherwise the string will be 0 length. char product_matched[80]; char version_matched[80]; char extrainfo_matched[256]; char hostname_matched[80]; char ostype_matched[32]; char devicetype_matched[32]; char cpe_a_matched[80]; char cpe_h_matched[80]; char cpe_o_matched[80]; enum service_tunnel_type tunnel; /* SERVICE_TUNNEL_NONE, SERVICE_TUNNEL_SSL */ // This stores our SSL session id, which will help speed up subsequent // SSL connections. It's overwritten each time. void* is used so we don't // need to #ifdef HAVE_OPENSSL all over. We'll cast later as needed. void *ssl_session; // if a match was found (see above), this tells whether it was a "soft" // or hard match. It is always false if no match has been found. bool softMatchFound; // most recent probe executed (or in progress). If there has been a match // (probe_matched != NULL), this will be the corresponding ServiceProbe. ServiceProbe *currentProbe(); // computes the next probe to test, and ALSO CHANGES currentProbe() to // that! If newresp is true, the old response info will be lost and // invalidated. Otherwise it remains as if it had been received by // the current probe (useful after a NULL probe). ServiceProbe *nextProbe(bool newresp); // Resets the probes back to the first one. One case where this is useful is // when SSL is detected -- we redo all probes through SSL. If freeFP, any // service fingerprint is freed too. void resetProbes(bool freefp); // Number of milliseconds used so far to complete the present probe. Timeval // can omitted, it is just there as an optimization in case you have it handy. int probe_timemsused(const ServiceProbe *probe, const struct timeval *now = NULL); // Number of milliseconds left to complete the present probe, or 0 if // the probe is already expired. Timeval can omitted, it is just there // as an optimization in case you have it handy. int probe_timemsleft(const ServiceProbe *probe, const struct timeval *now = NULL); enum serviceprobestate probe_state; // defined in portlist.h nsock_iod niod; // The IO Descriptor being used in this probe (or NULL) u16 portno; // in host byte order u8 proto; // IPPROTO_TCP or IPPROTO_UDP // The time that the current probe was executed (meaning TCP connection // made or first UDP packet sent struct timeval currentprobe_exec_time; // Append newly-received data to the current response string (if any) void appendtocurrentproberesponse(const u8 *respstr, int respstrlen); // Get the full current response string. Note that this pointer is // INVALIDATED if you call appendtocurrentproberesponse() or nextProbe() u8 *getcurrentproberesponse(int *respstrlen); AllProbes *AP; // Is it possible this service is tcpwrapped? Not if a probe times out or // gets a real response. bool tcpwrap_possible; private: // Adds a character to servicefp. Takes care of word wrapping if // necessary at the given (wrapat) column. Chars will only be // written if there is enough space. Otherwise it exits. void addServiceChar(char c, int wrapat); // Like addServiceChar, but for a whole zero-terminated string void addServiceString(const char *s, int wrapat); std::vector::iterator current_probe; u8 *currentresp; int currentresplen; char *servicefp; int servicefplen; int servicefpalloc; }; // This holds the service information for a group of Targets being service scanned. class ServiceGroup { public: ServiceGroup(std::vector &Targets, AllProbes *AP); ~ServiceGroup(); std::list services_finished; // Services finished (discovered or not) std::list services_in_progress; // Services currently being probed std::list services_remaining; // Probes not started yet unsigned int ideal_parallelism; // Max (and desired) number of probes out at once. ScanProgressMeter *SPM; int num_hosts_timedout; // # of hosts timed out during (or before) scan }; #define SUBSTARGS_MAX_ARGS 5 #define SUBSTARGS_STRLEN 128 #define SUBSTARGS_ARGTYPE_NONE 0 #define SUBSTARGS_ARGTYPE_STRING 1 #define SUBSTARGS_ARGTYPE_INT 2 struct substargs { int num_args; // Total number of arguments found char str_args[SUBSTARGS_MAX_ARGS][SUBSTARGS_STRLEN]; // This is the length of each string arg, since they can contain zeros. // The str_args[] are zero-terminated for convenience in the cases where // you know they won't contain zero. int str_args_len[SUBSTARGS_MAX_ARGS]; int int_args[SUBSTARGS_MAX_ARGS]; // The type of each argument -- see #define's above. int arg_types[SUBSTARGS_MAX_ARGS]; }; /******************** PROTOTYPES *******************/ static void servicescan_read_handler(nsock_pool nsp, nsock_event nse, void *mydata); static void servicescan_write_handler(nsock_pool nsp, nsock_event nse, void *mydata); static void servicescan_connect_handler(nsock_pool nsp, nsock_event nse, void *mydata); static void end_svcprobe(nsock_pool nsp, enum serviceprobestate probe_state, ServiceGroup *SG, ServiceNFO *svc, nsock_iod nsi); ServiceProbeMatch::ServiceProbeMatch() { deflineno = -1; servicename = NULL; matchstr = NULL; product_template = version_template = info_template = NULL; hostname_template = ostype_template = devicetype_template = NULL; regex_compiled = NULL; regex_extra = NULL; isInitialized = false; matchops_ignorecase = false; matchops_dotall = false; isSoft = false; } ServiceProbeMatch::~ServiceProbeMatch() { std::vector::iterator it; if (!isInitialized) return; if (servicename) free(servicename); if (matchstr) free(matchstr); if (product_template) free(product_template); if (version_template) free(version_template); if (info_template) free(info_template); if (hostname_template) free(hostname_template); if (ostype_template) free(ostype_template); if (devicetype_template) free(devicetype_template); for (it = cpe_templates.begin(); it != cpe_templates.end(); it++) free(*it); matchstrlen = 0; if (regex_compiled) pcre_free(regex_compiled); if (regex_extra) pcre_free(regex_extra); isInitialized = false; matchops_anchor = -1; } /* Realloc a malloc-allocated string and put a given prefix at the front. */ static char *string_prefix(char *string, const char *prefix) { size_t slen, plen; slen = strlen(string); plen = strlen(prefix); string = (char *) safe_realloc(string, plen + slen + 1); memmove(string + plen, string, slen + 1); memmove(string, prefix, plen); return string; } /* Read the next tmplt from *matchtext and update *matchtext. Return true iff a template was read. For example, after matchtext = "p/123/ d/456/"; next_template(&matchtext, &modestr, &flags, &tmplt); then matchtext == " d/456/" modestr == "p" tmplt == "123" flags == "" *modestr and *tmplt must be freed if the return value is true. */ static bool next_template(const char **matchtext, char **modestr, char **tmplt, char **flags, int lineno) { const char *p, *q; char delimchar; p = *matchtext; while(isspace((int) (unsigned char) *p)) p++; if (*p == '\0') return false; q = p; while (isalpha(*q) || *q == ':') q++; if (*q == '\0' || isspace(*q)) fatal("%s: parse error on line %d of nmap-service-probes", __func__, lineno); *modestr = mkstr(p, q); delimchar = *q; p = q + 1; q = strchr(p, delimchar); if (q == NULL) fatal("%s: parse error on line %d of nmap-service-probes", __func__, lineno); *tmplt = mkstr(p, q); p = q + 1; q = p; while (isalpha(*q)) q++; *flags = mkstr(p, q); /* Update pointer for caller. */ *matchtext = q; return true; } // match text from the nmap-service-probes file. This must be called // before you try and do anything with this match. This function // should be passed the whole line starting with "match" or // "softmatch" in nmap-service-probes. The line number that the text // is provided so that it can be reported in error messages. This // function will abort the program if there is a syntax problem. void ServiceProbeMatch::InitMatch(const char *matchtext, int lineno) { const char *p; char *modestr, *tmptemplate, *flags; int pcre_compile_ops = 0; const char *pcre_errptr = NULL; int pcre_erroffset = 0; char **curr_tmp = NULL; if (isInitialized) fatal("Sorry ... %s does not yet support reinitializion", __func__); if (!matchtext || !*matchtext) fatal("%s: no matchtext passed in (line %d of nmap-service-probes)", __func__, lineno); isInitialized = true; deflineno = lineno; while(isspace((int) (unsigned char) *matchtext)) matchtext++; // first we find whether this is a "soft" or normal match if (strncmp(matchtext, "softmatch ", 10) == 0) { isSoft = true; matchtext += 10; } else if (strncmp(matchtext, "match ", 6) == 0) { isSoft = false; matchtext += 6; } else fatal("%s: parse error on line %d of nmap-service-probes - must begin with \"match\" or \"softmatch\"", __func__, lineno); // next comes the service name p = strchr(matchtext, ' '); if (!p) fatal("%s: parse error on line %d of nmap-service-probes: could not find service name", __func__, lineno); servicename = (char *) safe_malloc(p - matchtext + 1); memcpy(servicename, matchtext, p - matchtext); servicename[p - matchtext] = '\0'; // The next part is a perl style regular expression specifier, like: // m/^220 .*smtp/i Where 'm' means a normal regular expressions is // used, the char after m can be anything (within reason, slash in // this case) and tells us what delineates the end of the regex. // After the delineating character are any single-character // options. ('i' means "case insensitive", 's' means that . matches // newlines (both are just as in perl) matchtext = p; if (!next_template(&matchtext, &modestr, &matchstr, &flags, lineno)) fatal("%s: parse error on line %d of nmap-service-probes", __func__, lineno); if (strcmp(modestr, "m") != 0) fatal("%s: parse error on line %d of nmap-service-probes: matchtext must begin with 'm'", __func__, lineno); matchtype = SERVICEMATCH_REGEX; // any options? for (p = flags; *p != '\0'; p++) { if (*p == 'i') matchops_ignorecase = true; else if (*p == 's') matchops_dotall = true; else fatal("%s: illegal regexp option on line %d of nmap-service-probes", __func__, lineno); } // Next we compile and study the regular expression to match if (matchops_ignorecase) pcre_compile_ops |= PCRE_CASELESS; if (matchops_dotall) pcre_compile_ops |= PCRE_DOTALL; regex_compiled = pcre_compile(matchstr, pcre_compile_ops, &pcre_errptr, &pcre_erroffset, NULL); if (regex_compiled == NULL) fatal("%s: illegal regexp on line %d of nmap-service-probes (at regexp offset %d): %s\n", __func__, lineno, pcre_erroffset, pcre_errptr); // Now study the regexp for greater efficiency regex_extra = pcre_study(regex_compiled, 0, &pcre_errptr); if (pcre_errptr != NULL) fatal("%s: failed to pcre_study regexp on line %d of nmap-service-probes: %s\n", __func__, lineno, pcre_errptr); free(modestr); free(flags); /* OK! Now we look for any templates of the form ?/.../ * where ? is either p, v, i, h, o, or d. / is any * delimiter character and ... is a template */ while (next_template(&matchtext, &modestr, &tmptemplate, &flags, lineno)) { if (strcmp(modestr, "p") == 0) curr_tmp = &product_template; else if (strcmp(modestr, "v") == 0) curr_tmp = &version_template; else if (strcmp(modestr, "i") == 0) curr_tmp = &info_template; else if (strcmp(modestr, "h") == 0) curr_tmp = &hostname_template; else if (strcmp(modestr, "o") == 0) curr_tmp = &ostype_template; else if (strcmp(modestr, "d") == 0) curr_tmp = &devicetype_template; else if (strcmp(modestr, "cpe:") == 0) { tmptemplate = string_prefix(tmptemplate, "cpe:/"); cpe_templates.push_back(NULL); curr_tmp = &cpe_templates.back(); } else fatal("%s: Unknown template specifier '%s' on line %d of nmap-service-probes", __func__, modestr, lineno); /* This one already defined? */ if (*curr_tmp) { if (o.debugging) { error("WARNING: Template \"%s/%s/\" replaced with \"%s/%s/\" on line %d of nmap-service-probes", modestr, *curr_tmp, modestr, tmptemplate, lineno); } free(*curr_tmp); } *curr_tmp = tmptemplate; free(modestr); free(flags); } isInitialized = 1; } // If the buf (of length buflen) match the regex in this // ServiceProbeMatch, returns the details of the match (service // name, version number if applicable, and whether this is a "soft" // match. If the buf doesn't match, the serviceName field in the // structure will be NULL. The MatchDetails structure returned is // only valid until the next time this function is called. The only // exception is that the serviceName field can be saved throughout // program execution. If no version matched, that field will be // NULL. const struct MatchDetails *ServiceProbeMatch::testMatch(const u8 *buf, int buflen) { int rc; static char product[80]; static char version[80]; static char info[256]; /* We will truncate with ... later */ static char hostname[80]; static char ostype[32]; static char devicetype[32]; static char cpe_a[80], cpe_h[80], cpe_o[80]; char *bufc = (char *) buf; int ovector[150]; // allows 50 substring matches (including the overall match) assert(isInitialized); assert (matchtype == SERVICEMATCH_REGEX); // Clear out the output struct memset(&MD_return, 0, sizeof(MD_return)); MD_return.isSoft = isSoft; rc = pcre_exec(regex_compiled, regex_extra, bufc, buflen, 0, 0, ovector, sizeof(ovector) / sizeof(*ovector)); if (rc < 0) { #ifdef PCRE_ERROR_MATCHLIMIT // earlier PCRE versions lack this if (rc == PCRE_ERROR_MATCHLIMIT) { if (o.debugging || o.verbose > 1) error("Warning: Hit PCRE_ERROR_MATCHLIMIT when probing for service %s with the regex '%s'", servicename, matchstr); } else #endif // PCRE_ERROR_MATCHLIMIT if (rc != PCRE_ERROR_NOMATCH) { fatal("Unexpected PCRE error (%d) when probing for service %s with the regex '%s'", rc, servicename, matchstr); } } else { // Yeah! Match apparently succeeded. // Now lets get the version number if available getVersionStr(buf, buflen, ovector, rc, product, sizeof(product), version, sizeof(version), info, sizeof(info), hostname, sizeof(hostname), ostype, sizeof(ostype), devicetype, sizeof(devicetype), cpe_a, sizeof(cpe_a), cpe_h, sizeof(cpe_h), cpe_o, sizeof(cpe_o)); if (*product) MD_return.product = product; if (*version) MD_return.version = version; if (*info) MD_return.info = info; if (*hostname) MD_return.hostname = hostname; if (*ostype) MD_return.ostype = ostype; if (*devicetype) MD_return.devicetype = devicetype; if (*cpe_a) MD_return.cpe_a = cpe_a; if (*cpe_h) MD_return.cpe_h = cpe_h; if (*cpe_o) MD_return.cpe_o = cpe_o; MD_return.serviceName = servicename; MD_return.lineno = getLineNo(); } return &MD_return; } // This simple function parses arguments out of a string. The string // starts with the first argument. Each argument can be a string or // an integer. Strings must be enclosed in double quotes (""). Most // standard C-style escapes are supported. If this is successful, the // number of args found is returned, args is filled appropriately, and // args_end (if non-null) is set to the character after the closing // ')'. Otherwise we return -1 and the values of args and args_end // are undefined. static int getsubstcommandargs(struct substargs *args, char *args_start, char **args_end) { char *p; unsigned int len; if (!args || !args_start) return -1; memset(args, 0, sizeof(*args)); while(*args_start && *args_start != ')') { // Find the next argument. while(isspace((int) (unsigned char) *args_start)) args_start++; if (*args_start == ')') break; else if (*args_start == '"') { // OK - it is a string // Do we have space for another arg? if (args->num_args == SUBSTARGS_MAX_ARGS) return -1; do { args_start++; if (*args_start == '"' && (*(args_start - 1) != '\\' || *(args_start - 2) == '\\')) break; len = args->str_args_len[args->num_args]; if (len >= SUBSTARGS_STRLEN - 1) return -1; args->str_args[args->num_args][len] = *args_start; args->str_args_len[args->num_args]++; } while(*args_start); len = args->str_args_len[args->num_args]; args->str_args[args->num_args][len] = '\0'; // Now handle escaped characters and such if (!cstring_unescape(args->str_args[args->num_args], &len)) return -1; args->str_args_len[args->num_args] = len; args->arg_types[args->num_args] = SUBSTARGS_ARGTYPE_STRING; args->num_args++; args_start++; args_start = strpbrk(args_start, ",)"); if (!args_start) return -1; if (*args_start == ',') args_start++; } else { // Must be an integer argument args->int_args[args->num_args] = (int) strtol(args_start, &p, 0); if (p <= args_start) return -1; args_start = p; args->arg_types[args->num_args] = SUBSTARGS_ARGTYPE_INT; args->num_args++; args_start = strpbrk(args_start, ",)"); if (!args_start) return -1; if (*args_start == ',') args_start++; } } if (*args_start == ')') args_start++; if (args_end) *args_end = args_start; return args->num_args; } /* These three functions manage a growing string buffer, appended to at the end. Begin with strbuf_init, follow with any number of strbuf_append, and end with strbuf_finish. */ static void strbuf_init(char **buf, size_t *n, size_t *len) { *buf = NULL; *n = 0; *len = 0; } static void strbuf_append(char **buf, size_t *n, size_t *len, const char *from, size_t fromlen) { /* Double the size of the buffer if necessary. */ if (*len == 0 || *len + fromlen > *n) { *n = (*len + fromlen) * 2; *buf = (char *) safe_realloc(*buf, *n + 1); } memcpy(*buf + *len, from, fromlen); *len += fromlen; } /* Trim to length. (Also does initial allocation when *buf is empty.) */ static void strbuf_finish(char **buf, size_t *n, size_t *len) { *buf = (char *) safe_realloc(*buf, *len + 1); (*buf)[*len] = '\0'; } /* Transform a string so that it is safe to insert into the middle of a CPE URL. */ static char *transform_cpe(const char *s) { char *result; size_t n, len, repllen; const char *p; strbuf_init(&result, &n, &len); for (p = s; *p != '\0'; p++) { const char *repl; char buf[32]; /* Section 5.4 of the CPE specification lists these characters to be escaped. */ if (strchr(":/?#[]@!$&'()*+,;=%<>\"", *p) != NULL) { Snprintf(buf, sizeof(buf), "%%%02X", *p); repl = buf; /* Replacing spaces with underscores is also a convention. */ } else if (isspace(*p)) { repl = "_"; /* Otherwise just make lower-case. */ } else { buf[0] = tolower(*p); buf[1] = '\0'; repl = buf; } repllen = strlen(repl); strbuf_append(&result, &n, &len, repl, repllen); } strbuf_finish(&result, &n, &len); return result; } // This function does the substitution of a placeholder like $2 or $P(4). It // returns a newly allocated string, or NULL if it fails. tmplvar is a template // variable, such as "$P(2)". We set *tmplvarend to the character after the // variable. subject, subjectlen, ovector, and nummatches mean the same as in // dotmplsubst(). static char *substvar(char *tmplvar, char **tmplvarend, const u8 *subject, int subjectlen, int *ovector, int nummatches) { char substcommand[16]; char *p = NULL; char *p_end; int subnum = 0; int offstart, offend; int rc; int i; struct substargs command_args; char *result; size_t n, len; // skip the '$' if (*tmplvar != '$') return NULL; tmplvar++; if (!isdigit((int) (unsigned char) *tmplvar)) { int commandlen; /* This is a command like $P(1). */ p = strchr(tmplvar, '('); if (!p) return NULL; commandlen = p - tmplvar; if (!commandlen || commandlen >= (int) sizeof(substcommand)) return NULL; memcpy(substcommand, tmplvar, commandlen); substcommand[commandlen] = '\0'; tmplvar = p+1; // Now we grab the arguments. rc = getsubstcommandargs(&command_args, tmplvar, &p_end); if (rc <= 0) return NULL; tmplvar = p_end; } else { /* This is a placeholder like $2. */ substcommand[0] = '\0'; subnum = *tmplvar - '0'; tmplvar++; } if (tmplvarend) *tmplvarend = tmplvar; strbuf_init(&result, &n, &len); if (!*substcommand) { /* Handler for a placeholder like $2. */ if (subnum > 9 || subnum <= 0) return NULL; if (subnum >= nummatches) return NULL; offstart = ovector[subnum * 2]; offend = ovector[subnum * 2 + 1]; assert(offstart >= 0 && offstart < subjectlen); assert(offend >= 0 && offend <= subjectlen); // A plain-jane copy strbuf_append(&result, &n, &len, (const char *) subject + offstart, offend - offstart); } else if (strcmp(substcommand, "P") == 0) { if (command_args.num_args != 1 || command_args.arg_types[0] != SUBSTARGS_ARGTYPE_INT) { return NULL; } subnum = command_args.int_args[0]; if (subnum > 9 || subnum <= 0) return NULL; if (subnum >= nummatches) return NULL; offstart = ovector[subnum * 2]; offend = ovector[subnum * 2 + 1]; assert(offstart >= 0 && offstart < subjectlen); assert(offend >= 0 && offend <= subjectlen); // This filter only includes printable characters. It is particularly // useful for collapsing unicode text that looks like // "W\0O\0R\0K\0G\0R\0O\0U\0P\0" for(i=offstart; i < offend; i++) { if (isprint((int) subject[i])) strbuf_append(&result, &n, &len, (const char *) subject + i, 1); } } else if (strcmp(substcommand, "SUBST") == 0) { char *findstr, *replstr; int findstrlen, replstrlen; if (command_args.num_args != 3 || command_args.arg_types[0] != SUBSTARGS_ARGTYPE_INT || command_args.arg_types[1] != SUBSTARGS_ARGTYPE_STRING || command_args.arg_types[2] != SUBSTARGS_ARGTYPE_STRING) { return NULL; } subnum = command_args.int_args[0]; if (subnum > 9 || subnum <= 0) return NULL; if (subnum >= nummatches) return NULL; offstart = ovector[subnum * 2]; offend = ovector[subnum * 2 + 1]; assert(offstart >= 0 && offstart < subjectlen); assert(offend >= 0 && offend <= subjectlen); findstr = command_args.str_args[1]; findstrlen = command_args.str_args_len[1]; replstr = command_args.str_args[2]; replstrlen = command_args.str_args_len[2]; for(i=offstart; i < offend; ) { if (memcmp(subject + i, findstr, findstrlen) != 0) { strbuf_append(&result, &n, &len, (const char *) subject + i, 1); // no match i++; } else { // The find string was found, copy it to newstring strbuf_append(&result, &n, &len, replstr, replstrlen); i += findstrlen; } } } else return NULL; // Unknown command strbuf_finish(&result, &n, &len); return result; } // This function takes a template string (tmpl) which can have // placeholders in it such as $1 for substring matches in a regexp // that was run against subject, and subjectlen, with the 'nummatches' // matches in ovector. The NUL-terminated newly composted string is // placed into 'newstr', as long as it doesn't exceed 'newstrlen' // bytes. Trailing whitespace and commas are removed. Returns zero for success // FIXME: The newstrlen argument is not actually checked, is it? // // The transform argument is a function pointer. If not NULL, the given // function is applied to all substitutions before they are inserted // into the result string. static int dotmplsubst(const u8 *subject, int subjectlen, int *ovector, int nummatches, char *tmpl, char *newstr, int newstrlen, char *(*transform)(const char *) = NULL) { int newlen; char *srcstart=tmpl, *srcend; char *dst = newstr; char *newstrend = newstr + newstrlen; // Right after the final char char *subst; if (!newstr || !tmpl) return -1; if (newstrlen < 3) return -1; // Have a nice day! while(*srcstart) { // First do any literal text before '$' srcend = strchr(srcstart, '$'); if (!srcend) { // Only literal text remain! while(*srcstart) { if (dst >= newstrend - 1) return -1; *dst++ = *srcstart++; } *dst = '\0'; while (--dst >= newstr) { if (isspace((int) (unsigned char) *dst) || *dst == ',') *dst = '\0'; else break; } return 0; } else { // Copy the literal text up to the '$', then do the substitution newlen = srcend - srcstart; if (newlen > 0) { if (newstrend - dst <= newlen - 1) return -1; memcpy(dst, srcstart, newlen); dst += newlen; } srcstart = srcend; subst = substvar(srcstart, &srcend, subject, subjectlen, ovector, nummatches); if (subst == NULL) return -1; /* Apply transformation if requested. */ if (transform != NULL) { char *tmp = subst; subst = transform(subst); free(tmp); if (subst == NULL) return -1; } newlen = strlen(subst); if (dst + newlen >= newstrend - 1) { free(subst); return -1; } memcpy(dst, subst, newlen); free(subst); dst += newlen; srcstart = srcend; } } if (dst >= newstrend - 1) return -1; *dst = '\0'; while (--dst >= newstr) { if (isspace((int) (unsigned char) *dst) || *dst == ',') *dst = '\0'; else break; } return 0; } // Use the version templates and the match data included here // to put the version info into the given strings, (as long as the sizes // are sufficient). Returns zero for success. If no template is available // for a string, that string will have zero length after the function // call (assuming the corresponding length passed in is at least 1) int ServiceProbeMatch::getVersionStr(const u8 *subject, int subjectlen, int *ovector, int nummatches, char *product, int productlen, char *version, int versionlen, char *info, int infolen, char *hostname, int hostnamelen, char *ostype, int ostypelen, char *devicetype, int devicetypelen, char *cpe_a, int cpe_alen, char *cpe_h, int cpe_hlen, char *cpe_o, int cpe_olen) { int rc; assert(productlen >= 0 && versionlen >= 0 && infolen >= 0 && hostnamelen >= 0 && ostypelen >= 0 && devicetypelen >= 0); if (productlen > 0) *product = '\0'; if (versionlen > 0) *version = '\0'; if (infolen > 0) *info = '\0'; if (hostnamelen > 0) *hostname = '\0'; if (ostypelen > 0) *ostype = '\0'; if (devicetypelen > 0) *devicetype = '\0'; if (cpe_alen > 0) *cpe_a = '\0'; if (cpe_hlen > 0) *cpe_h = '\0'; if (cpe_olen > 0) *cpe_o = '\0'; int retval = 0; // Now lets get this started! We begin with the product name if (product_template) { rc = dotmplsubst(subject, subjectlen, ovector, nummatches, product_template, product, productlen); if (rc != 0) { error("Warning: Servicescan failed to fill product_template (subjectlen: %d, productlen: %d). Capture exceeds length? Match string was line %d: p/%s/%s/%s", subjectlen, productlen, deflineno, (product_template)? product_template : "", (version_template)? version_template : "", (info_template)? info_template : ""); if (productlen > 0) *product = '\0'; retval = -1; } } if (version_template) { rc = dotmplsubst(subject, subjectlen, ovector, nummatches, version_template, version, versionlen); if (rc != 0) { error("Warning: Servicescan failed to fill version_template (subjectlen: %d, versionlen: %d). Capture exceeds length? Match string was line %d: v/%s/%s/%s", subjectlen, versionlen, deflineno, (product_template)? product_template : "", (version_template)? version_template : "", (info_template)? info_template : ""); if (versionlen > 0) *version = '\0'; retval = -1; } } if (info_template) { rc = dotmplsubst(subject, subjectlen, ovector, nummatches, info_template, info, infolen); if (rc != 0) { error("Warning: Servicescan failed to fill info_template (subjectlen: %d, infolen: %d). Capture exceeds length? Match string was line %d: i/%s/%s/%s", subjectlen, infolen, deflineno, (product_template)? product_template : "", (version_template)? version_template : "", (info_template)? info_template : ""); if (infolen > 0) *info = '\0'; retval = -1; } } if (hostname_template) { rc = dotmplsubst(subject, subjectlen, ovector, nummatches, hostname_template, hostname, hostnamelen); if (rc != 0) { error("Warning: Servicescan failed to fill hostname_template (subjectlen: %d, hostnamelen: %d). Capture exceeds length? Match string was line %d: h/%s/", subjectlen, hostnamelen, deflineno, (hostname_template)? hostname_template : ""); if (hostnamelen > 0) *hostname = '\0'; retval = -1; } } if (ostype_template) { rc = dotmplsubst(subject, subjectlen, ovector, nummatches, ostype_template, ostype, ostypelen); if (rc != 0) { error("Warning: Servicescan failed to fill ostype_template (subjectlen: %d, ostypelen: %d). Capture exceeds length? Match string was line %d: o/%s/", subjectlen, ostypelen, deflineno, (ostype_template)? ostype_template : ""); if (ostypelen > 0) *ostype = '\0'; retval = -1; } } if (devicetype_template) { rc = dotmplsubst(subject, subjectlen, ovector, nummatches, devicetype_template, devicetype, devicetypelen); if (rc != 0) { error("Warning: Servicescan failed to fill devicetype_template (subjectlen: %d, devicetypelen: %d). Too long? Match string was line %d: d/%s/", subjectlen, devicetypelen, deflineno, (devicetype_template)? devicetype_template : ""); if (devicetypelen > 0) *devicetype = '\0'; retval = -1; } } /* There may be multiple cpe templates. We peek at the first character and store in cpe_a, cpe_h, or cpe_o as appropriate. */ for (unsigned int i = 0; i < cpe_templates.size(); i++) { char *cpe; int cpelen; int part; part = cpe_get_part(cpe_templates[i]); switch (part) { case 'a': cpe = cpe_a; cpelen = cpe_alen; break; case 'h': cpe = cpe_h; cpelen = cpe_hlen; break; case 'o': cpe = cpe_o; cpelen = cpe_olen; break; default: error("Warning: ignoring cpe:// template with unknown part '%c' (0x%02X)", isprint(part) ? part : '.', part); continue; break; } rc = dotmplsubst(subject, subjectlen, ovector, nummatches, cpe_templates[i], cpe, cpelen, transform_cpe); if (rc != 0) { error("Warning: Servicescan failed to fill cpe_%c (subjectlen: %d, devicetypelen: %d). Too long? Match string was line %d: d/%s/", part, subjectlen, devicetypelen, deflineno, (devicetype_template)? devicetype_template : ""); if (devicetypelen > 0) *devicetype = '\0'; retval = -1; } } return retval; } ServiceProbe::ServiceProbe() { int i; probename = NULL; probestring = NULL; totalwaitms = DEFAULT_SERVICEWAITMS; tcpwrappedms = DEFAULT_TCPWRAPPEDMS; probestringlen = 0; probeprotocol = -1; // The default rarity level for a probe without a rarity // directive - should almost never have to be relied upon. rarity = 5; fallbackStr = NULL; for (i=0; i::iterator vi; if (probename) free(probename); if (probestring) free(probestring); for(vi = matches.begin(); vi != matches.end(); vi++) { delete *vi; } if (fallbackStr) free(fallbackStr); } // Parses the "probe " line in the nmap-service-probes file. Pass the rest of the line // after "probe ". The format better be: // [TCP|UDP] [probename] q|probetext| // Note that the delimiter (|) of the probetext can be anything (within reason) // the lineno is requested because this function will bail with an error // (giving the line number) if it fails to parse the string. void ServiceProbe::setProbeDetails(char *pd, int lineno) { char *p; unsigned int len; char delimiter; if (!pd || !*pd) fatal("Parse error on line %d of nmap-service-probes: no arguments found!", lineno); // First the protocol if (strncmp(pd, "TCP ", 4) == 0) probeprotocol = IPPROTO_TCP; else if (strncmp(pd, "UDP ", 4) == 0) probeprotocol = IPPROTO_UDP; else fatal("Parse error on line %d of nmap-service-probes: invalid protocol", lineno); pd += 4; // Next the service name if (!isalnum((int) (unsigned char) *pd)) fatal("Parse error on line %d of nmap-service-probes - bad probe name", lineno); p = strchr(pd, ' '); if (!p) fatal("Parse error on line %d of nmap-service-probes - nothing after probe name", lineno); len = p - pd; probename = (char *) safe_malloc(len + 1); memcpy(probename, pd, len); probename[len] = '\0'; // Now for the probe itself pd = p+1; if (*pd != 'q') fatal("Parse error on line %d of nmap-service-probes - probe string must begin with 'q'", lineno); delimiter = *(++pd); p = strchr(++pd, delimiter); if (!p) fatal("Parse error on line %d of nmap-service-probes -- no ending delimiter for probe string", lineno); *p = '\0'; if (!cstring_unescape(pd, &len)) { fatal("Parse error on line %d of nmap-service-probes: bad probe string escaping", lineno); } setProbeString((const u8 *)pd, len); } void ServiceProbe::setProbeString(const u8 *ps, int stringlen) { if (probestringlen) free(probestring); probestringlen = stringlen; if (stringlen > 0) { probestring = (u8 *) safe_malloc(stringlen + 1); memcpy(probestring, ps, stringlen); probestring[stringlen] = '\0'; // but note that other \0 may be in string } else probestring = NULL; } void ServiceProbe::setPortVector(std::vector *portv, const char *portstr, int lineno) { const char *current_range; char *endptr; long int rangestart = 0, rangeend = 0; current_range = portstr; do { while(*current_range && isspace((int) (unsigned char) *current_range)) current_range++; if (isdigit((int) (unsigned char) *current_range)) { rangestart = strtol(current_range, &endptr, 10); if (rangestart < 0 || rangestart > 65535) { fatal("Parse error on line %d of nmap-service-probes: Ports must be between 0 and 65535 inclusive", lineno); } current_range = endptr; while(isspace((int) (unsigned char) *current_range)) current_range++; } else { fatal("Parse error on line %d of nmap-service-probes: An example of proper portlist form is \"21-25,53,80\"", lineno); } /* Now I have a rangestart, time to go after rangeend */ if (!*current_range || *current_range == ',') { /* Single port specification */ rangeend = rangestart; } else if (*current_range == '-') { current_range++; if (isdigit((int) (unsigned char) *current_range)) { rangeend = strtol(current_range, &endptr, 10); if (rangeend < 0 || rangeend > 65535 || rangeend < rangestart) { fatal("Parse error on line %d of nmap-service-probes: Ports must be between 0 and 65535 inclusive", lineno); } current_range = endptr; } else { fatal("Parse error on line %d of nmap-service-probes: An example of proper portlist form is \"21-25,53,80\"", lineno); } } else { fatal("Parse error on line %d of nmap-service-probes: An example of proper portlist form is \"21-25,53,80\"", lineno); } /* Now I have a rangestart and a rangeend, so I can add these ports */ while(rangestart <= rangeend) { portv->push_back(rangestart); rangestart++; } /* Find the next range */ while(isspace((int) (unsigned char) *current_range)) current_range++; if (*current_range && *current_range != ',') { fatal("Parse error on line %d of nmap-service-probes: An example of proper portlist form is \"21-25,53,80\"", lineno); } if (*current_range == ',') current_range++; } while(current_range && *current_range); } // Takes a string as given in the 'ports '/'sslports ' line of // nmap-service-probes. Pass in the list from the appropriate // line. For 'sslports', tunnel should be specified as // SERVICE_TUNNEL_SSL. Otherwise use SERVICE_TUNNEL_NONE. The line // number is requested because this function will bail with an error // (giving the line number) if it fails to parse the string. Ports // are a comma separated list of ports and ranges // (e.g. 53,80,6000-6010). void ServiceProbe::setProbablePorts(enum service_tunnel_type tunnel, const char *portstr, int lineno) { if (tunnel == SERVICE_TUNNEL_NONE) setPortVector(&probableports, portstr, lineno); else { assert(tunnel == SERVICE_TUNNEL_SSL); setPortVector(&probablesslports, portstr, lineno); } } /* Returns true if the passed in port is on the list of probable ports for this probe and tunnel type. Use a tunnel of SERVICE_TUNNEL_SSL or SERVICE_TUNNEL_NONE as appropriate */ bool ServiceProbe::portIsProbable(enum service_tunnel_type tunnel, u16 portno) { std::vector *portv; portv = (tunnel == SERVICE_TUNNEL_SSL)? &probablesslports : &probableports; if (find(portv->begin(), portv->end(), portno) == portv->end()) return false; return true; } // Returns true if the passed in service name is among those that can // be detected by the matches in this probe; bool ServiceProbe::serviceIsPossible(const char *sname) { std::vector::iterator vi; for(vi = detectedServices.begin(); vi != detectedServices.end(); vi++) { if (strcmp(*vi, sname) == 0) return true; } return false; } // Takes a string following a Rarity directive in the probes file. // The string should contain a single integer between 1 and 9. The // default rarity is 5. This function will bail if the string is invalid. void ServiceProbe::setRarity(const char *portstr, int lineno) { int tp; tp = atoi(portstr); if (tp < 1 || tp > 9) fatal("%s: Rarity directive on line %d of nmap-service-probes must be between 1 and 9", __func__, lineno); rarity = tp; } // Takes a match line in a probe description and adds it to the // list of matches for this probe. This function should be passed // the whole line starting with "match" or "softmatch" in // nmap-service-probes. The line number is requested because this // function will bail with an error (giving the line number) if it // fails to parse the string. void ServiceProbe::addMatch(const char *match, int lineno) { const char *sname; ServiceProbeMatch *newmatch = new ServiceProbeMatch(); newmatch->InitMatch(match, lineno); sname = newmatch->getName(); if (!serviceIsPossible(sname)) detectedServices.push_back(sname); matches.push_back(newmatch); } /* Parses the given nmap-service-probes file into the AP class Must NOT be made static because I have external maintenance tools (servicematch) which use this */ void parse_nmap_service_probe_file(AllProbes *AP, char *filename) { ServiceProbe *newProbe = NULL; char line[2048]; int lineno = 0; FILE *fp; // We better start by opening the file fp = fopen(filename, "r"); if (!fp) fatal("Failed to open nmap-service-probes file %s for reading", filename); while(fgets(line, sizeof(line), fp)) { lineno++; if (*line == '\n' || *line == '#') continue; if (strncmp(line, "Exclude ", 8) == 0) { if (AP->excluded_seen) fatal("Only 1 Exclude directive is allowed in the nmap-service-probes file"); getpts(line+8, &AP->excludedports); AP->excluded_seen = true; continue; } anotherprobe: if (strncmp(line, "Probe ", 6) != 0) fatal("Parse error on line %d of nmap-service-probes file: %s -- line was expected to begin with \"Probe \" or \"Exclude \"", lineno, filename); newProbe = new ServiceProbe(); newProbe->setProbeDetails(line + 6, lineno); // Now we read the rest of the probe info while(fgets(line, sizeof(line), fp)) { lineno++; if (*line == '\n' || *line == '#') continue; if (strncmp(line, "Probe ", 6) == 0) { if (newProbe->isNullProbe()) { assert(!AP->nullProbe); AP->nullProbe = newProbe; } else { AP->probes.push_back(newProbe); } goto anotherprobe; } else if (strncmp(line, "ports ", 6) == 0) { newProbe->setProbablePorts(SERVICE_TUNNEL_NONE, line + 6, lineno); } else if (strncmp(line, "sslports ", 9) == 0) { newProbe->setProbablePorts(SERVICE_TUNNEL_SSL, line + 9, lineno); } else if (strncmp(line, "rarity ", 7) == 0) { newProbe->setRarity(line + 7, lineno); } else if (strncmp(line, "fallback ", 9) == 0) { newProbe->fallbackStr = strdup(line + 9); } else if (strncmp(line, "totalwaitms ", 12) == 0) { long waitms = strtol(line + 12, NULL, 10); if (waitms < 100 || waitms > 300000) fatal("Error on line %d of nmap-service-probes file (%s): bad totalwaitms value. Must be between 100 and 300000 milliseconds", lineno, filename); newProbe->totalwaitms = waitms; } else if (strncmp(line, "tcpwrappedms ", 13) == 0) { long waitms = strtol(line + 13, NULL, 10); if (waitms < 100 || waitms > 300000) fatal("Error on line %d of nmap-service-probes file (%s): bad tcpwrappedms value. Must be between 100 and 300000 milliseconds", lineno, filename); newProbe->tcpwrappedms = waitms; } else if (strncmp(line, "match ", 6) == 0 || strncmp(line, "softmatch ", 10) == 0) { newProbe->addMatch(line, lineno); } else if (strncmp(line, "Exclude ", 8) == 0) { fatal("The Exclude directive must precede all Probes in nmap-service-probes"); } else fatal("Parse error on line %d of nmap-service-probes file: %s -- unknown directive", lineno, filename); } } if (newProbe != NULL) { if (newProbe->isNullProbe()) { assert(!AP->nullProbe); AP->nullProbe = newProbe; } else { AP->probes.push_back(newProbe); } } fclose(fp); AP->compileFallbacks(); } // Parses the nmap-service-probes file, and adds each probe to // the already-created 'probes' vector. static void parse_nmap_service_probes(AllProbes *AP) { char filename[256]; if (nmap_fetchfile(filename, sizeof(filename), "nmap-service-probes") != 1){ fatal("Service scan requested but I cannot find nmap-service-probes file. It should be in %s, ~/.nmap/ or .", NMAPDATADIR); } parse_nmap_service_probe_file(AP, filename); /* Record where this data file was found. */ o.loaded_data_files["nmap-service-probes"] = filename; } AllProbes *AllProbes::global_AP; AllProbes *AllProbes::service_scan_init(void) { if(global_AP) return global_AP; global_AP = new AllProbes(); parse_nmap_service_probes(global_AP); return global_AP; } void AllProbes::service_scan_free(void) { if(global_AP){ delete global_AP; global_AP = NULL; } } // Function that calls isExcluded() function to check if the port // is in the excludedports list. int AllProbes::check_excluded_port(unsigned short portno, int proto) { int excluded; // Check if the -sV version scan option was specified // or if the --allports option was used if (!o.servicescan || o.override_excludeports) return 0; if (global_AP == NULL) fatal("Failed to check the list of excluded ports: %s", __func__); if ((excluded = global_AP->isExcluded(portno, proto))) { if (o.debugging) log_write(LOG_PLAIN, "EXCLUDING %d/%s\n", portno, IPPROTO2STR(proto)); } return excluded; } // If the buf (of length buflen) matches one of the regexes in this // ServiceProbe, returns the details of nth match (service name, // version number if applicable, and whether this is a "soft" match. // If the buf doesn't match, the serviceName field in the structure // will be NULL. The MatchDetails returned is only valid until the // next time this function is called. The only exception is that the // serviceName field can be saved throughout program execution. If // no version matched, that field will be NULL. This function may // return NULL if there are no match lines at all in this probe. const struct MatchDetails *ServiceProbe::testMatch(const u8 *buf, int buflen, int n = 0) { std::vector::iterator vi; const struct MatchDetails *MD; for(vi = matches.begin(); vi != matches.end(); vi++) { MD = (*vi)->testMatch(buf, buflen); if (MD->serviceName) { if (n == 0) return MD; n--; } } return NULL; } AllProbes::AllProbes() { nullProbe = NULL; excluded_seen = false; memset(&excludedports, 0, sizeof(excludedports)); } AllProbes::~AllProbes() { std::vector::iterator vi; // Delete all the ServiceProbe's inside the probes vector for(vi = probes.begin(); vi != probes.end(); vi++) { delete *vi; } if(nullProbe) delete nullProbe; free_scan_lists(&excludedports); } // Tries to find the probe in this AllProbes class which have the // given name and protocol. It can return the NULL probe. ServiceProbe *AllProbes::getProbeByName(const char *name, int proto) { std::vector::iterator vi; if (proto == IPPROTO_TCP && nullProbe && strcmp(nullProbe->getName(), name) == 0) return nullProbe; for(vi = probes.begin(); vi != probes.end(); vi++) { if ((*vi)->getProbeProtocol() == proto && strcmp(name, (*vi)->getName()) == 0) return *vi; } return NULL; } // Returns nonzero if port was specified in the excludeports // directive in nmap-service-probes. Zero otherwise. // Proto should be IPPROTO_TCP for TCP and IPPROTO_UDP for UDP // Note that although getpts() can set protocols (for protocol // scanning), this is ignored here because you can't version // scan protocols. int AllProbes::isExcluded(unsigned short port, int proto) { unsigned short *p=NULL; int count=-1,i; if (!excluded_seen) return 0; if (proto == IPPROTO_TCP) { p = excludedports.tcp_ports; count = excludedports.tcp_count; } else if (proto == IPPROTO_UDP) { p = excludedports.udp_ports; count = excludedports.udp_count; } else if (proto == IPPROTO_SCTP) { p = excludedports.sctp_ports; count = excludedports.sctp_count; } else { fatal("Bad proto number (%d) specified in %s", proto, __func__); } for (i=0; i::iterator curr; char *tp; int i; curr = probes.begin(); // The NULL probe is a special case: if (nullProbe != NULL) nullProbe->fallbacks[0] = nullProbe; while (curr != probes.end()) { if ((*curr)->fallbackStr == NULL) { // A non-NULL probe without a fallback directive. We // just use "Itself,NULL" unless it's UDP, then just "Itself". (*curr)->fallbacks[0] = *curr; if ((*curr)->getProbeProtocol() == IPPROTO_TCP) (*curr)->fallbacks[1] = nullProbe; } else { // A non-NULL probe *with* a fallback directive. We use: // TCP: "Itself,,...,,NULL" // UDP: "Itself,,...," (*curr)->fallbacks[0] = *curr; i = 1; tp = strtok((*curr)->fallbackStr, ",\r\n\t "); // \r and \n because string will be terminated with them while (tp != NULL && i<(MAXFALLBACKS-1)) { (*curr)->fallbacks[i] = getProbeByName(tp, (*curr)->getProbeProtocol()); if ((*curr)->fallbacks[i] == NULL) fatal("%s: Unknown fallback specified in Probe %s: '%s'", __func__, (*curr)->getName(), tp); i++; tp = strtok(NULL, ",\r\n\t "); } if (i == MAXFALLBACKS-1) fatal("%s: MAXFALLBACKS exceeded on probe '%s'", __func__, (*curr)->getName()); if ((*curr)->getProbeProtocol() == IPPROTO_TCP) (*curr)->fallbacks[i] = nullProbe; } if ((*curr)->fallbackStr) free((*curr)->fallbackStr); (*curr)->fallbackStr = NULL; curr++; } } ServiceNFO::ServiceNFO(AllProbes *newAP) { target = NULL; probe_matched = NULL; niod = NULL; probe_state = PROBESTATE_INITIAL; portno = proto = 0; AP = newAP; currentresp = NULL; currentresplen = 0; product_matched[0] = version_matched[0] = extrainfo_matched[0] = '\0'; hostname_matched[0] = ostype_matched[0] = devicetype_matched[0] = '\0'; cpe_a_matched[0] = cpe_h_matched[0] = cpe_o_matched[0] = '\0'; tunnel = SERVICE_TUNNEL_NONE; ssl_session = NULL; softMatchFound = false; servicefplen = servicefpalloc = 0; servicefp = NULL; tcpwrap_possible = true; memset(¤tprobe_exec_time, 0, sizeof(currentprobe_exec_time)); } ServiceNFO::~ServiceNFO() { if (currentresp) free(currentresp); if (servicefp) free(servicefp); servicefp = NULL; servicefpalloc = servicefplen = 0; #if HAVE_OPENSSL if (ssl_session) SSL_SESSION_free((SSL_SESSION*)ssl_session); ssl_session=NULL; #endif } // Adds a character to servicefp. Takes care of word wrapping if // necessary at the given (wrapat) column. Chars will only be // written if there is enough space. Otherwise it exits. void ServiceNFO::addServiceChar(const char c, int wrapat) { if (servicefpalloc - servicefplen < 6) fatal("%s - out of space for servicefp", __func__); if (servicefplen % (wrapat+1) == wrapat) { // we need to start a new line memcpy(servicefp + servicefplen, "\nSF:", 4); servicefplen += 4; } servicefp[servicefplen++] = c; } // Like addServiceChar, but for a whole zero-terminated string void ServiceNFO::addServiceString(const char *s, int wrapat) { while(*s) addServiceChar(*s++, wrapat); } // If a service responds to a given probeName, this function adds the // response to the fingerprint for that service. The fingerprint can // be printed when nothing matches the service. You can obtain the // fingerprint (if any) via getServiceFingerprint(); void ServiceNFO::addToServiceFingerprint(const char *probeName, const u8 *resp, int resplen) { int spaceleft = servicefpalloc - servicefplen; int servicewrap=74; // Wrap after 74 chars / line int respused = MIN(resplen, (o.debugging)? 1300 : 900); // truncate to reasonable size // every char could require \xHH escape, plus there is the matter of // "\nSF:" for each line, plus "%r(probename,probelen,"") Oh, and // the SF-PortXXXX-TCP stuff, etc int spaceneeded = respused * 5 + strlen(probeName) + 128; int srcidx; struct tm *ltime; time_t timep; char buf[128]; assert(resplen); assert(probeName); if (servicefplen > (o.debugging? 10000 : 2200)) return; // it is large enough. if (spaceneeded >= spaceleft) { spaceneeded = MAX(spaceneeded, 512); // No point in tiny allocations spaceneeded += servicefpalloc; servicefp = (char *) safe_realloc(servicefp, spaceneeded); servicefpalloc = spaceneeded; } spaceleft = servicefpalloc - servicefplen; if (servicefplen == 0) { timep = time(NULL); ltime = localtime(&timep); Snprintf(buf, sizeof(buf), "SF-Port%hu-%s:V=%s%s%%I=%d%%D=%d/%d%%Time=%X%%P=%s", portno, proto2ascii_uppercase(proto), NMAP_VERSION, (tunnel == SERVICE_TUNNEL_SSL)? "%T=SSL" : "", o.version_intensity, ltime->tm_mon + 1, ltime->tm_mday, (int) timep, NMAP_PLATFORM); addServiceString(buf, servicewrap); } // Note that we give the total length of the response, even though we // may truncate Snprintf(buf, sizeof(buf), "%%r(%s,%X,\"", probeName, resplen); addServiceString(buf, servicewrap); // Now for the probe response itself ... for(srcidx=0; srcidx < respused; srcidx++) { // A run of this can take up to 8 chars: "\n \x20" assert(servicefpalloc - servicefplen > 8); if (isalnum((int)resp[srcidx])) addServiceChar((char) resp[srcidx], servicewrap); else if (resp[srcidx] == '\0') { /* We need to be careful with this, because if it is followed by an ASCII number, PCRE will treat it differently. */ if (srcidx + 1 >= respused || !isdigit((int) resp[srcidx + 1])) addServiceString("\\0", servicewrap); else addServiceString("\\x00", servicewrap); } else if (strchr("\\?\"[]().*+$^|", resp[srcidx])) { addServiceChar('\\', servicewrap); addServiceChar(resp[srcidx], servicewrap); } else if (ispunct((int)resp[srcidx])) { addServiceChar((char) resp[srcidx], servicewrap); } else if (resp[srcidx] == '\r') { addServiceString("\\r", servicewrap); } else if (resp[srcidx] == '\n') { addServiceString("\\n", servicewrap); } else if (resp[srcidx] == '\t') { addServiceString("\\t", servicewrap); } else { addServiceChar('\\', servicewrap); addServiceChar('x', servicewrap); Snprintf(buf, sizeof(buf), "%02x", resp[srcidx]); addServiceChar(*buf, servicewrap); addServiceChar(*(buf+1), servicewrap); } } addServiceChar('"', servicewrap); addServiceChar(')', servicewrap); assert(servicefpalloc - servicefplen > 1); servicefp[servicefplen] = '\0'; } // Get the service fingerprint. It is NULL if there is none, such // as if there was a match before any other probes were finished (or // if no probes gave back data). Note that this is plain // NUL-terminated ASCII data, although the length is optionally // available anyway. This function terminates the service fingerprint // with a semi-colon const char *ServiceNFO::getServiceFingerprint(int *flen) { if (servicefplen == 0) { if (flen) *flen = 0; return NULL; } // Ensure we have enough space for the terminating semi-colon and \0 if (servicefplen + 2 > servicefpalloc) { servicefpalloc = servicefplen + 20; servicefp = (char *) safe_realloc(servicefp, servicefpalloc); } if (flen) *flen = servicefplen + 1; // We terminate with a semi-colon, which is never wrapped. servicefp[servicefplen] = ';'; servicefp[servicefplen + 1] = '\0'; return servicefp; } ServiceProbe *ServiceNFO::currentProbe() { if (probe_state == PROBESTATE_INITIAL) { return nextProbe(true); } else if (probe_state == PROBESTATE_NULLPROBE) { assert(AP->nullProbe); return AP->nullProbe; } else if (probe_state == PROBESTATE_MATCHINGPROBES || probe_state == PROBESTATE_NONMATCHINGPROBES) { return *current_probe; } return NULL; } // computes the next probe to test, and ALSO CHANGES currentProbe() to // that! If newresp is true, the old response info will be lost and // invalidated. Otherwise it remains as if it had been received by // the current probe (useful after a NULL probe). ServiceProbe *ServiceNFO::nextProbe(bool newresp) { bool dropdown = false; // This invalidates the probe response string if any if (newresp) { if (currentresp) free(currentresp); currentresp = NULL; currentresplen = 0; } if (probe_state == PROBESTATE_INITIAL) { probe_state = PROBESTATE_NULLPROBE; // This is the very first probe -- so we try to use the NULL probe // but obviously NULL probe only works with TCP if (proto == IPPROTO_TCP && AP->nullProbe) return AP->nullProbe; // No valid NULL probe -- we'll drop to the next state } if (probe_state == PROBESTATE_NULLPROBE) { // There can only be one (or zero) NULL probe. So now we go through the // list looking for matching probes probe_state = PROBESTATE_MATCHINGPROBES; dropdown = true; current_probe = AP->probes.begin(); } if (probe_state == PROBESTATE_MATCHINGPROBES) { if (!dropdown && current_probe != AP->probes.end()) current_probe++; while (current_probe != AP->probes.end()) { // For the first run, we only do probes that match this port number if ((proto == (*current_probe)->getProbeProtocol()) && (*current_probe)->portIsProbable(tunnel, portno)) { // This appears to be a valid probe. Let's do it! return *current_probe; } current_probe++; } // Tried all MATCHINGPROBES -- now we must move to nonmatching probe_state = PROBESTATE_NONMATCHINGPROBES; dropdown = true; current_probe = AP->probes.begin(); } if (probe_state == PROBESTATE_NONMATCHINGPROBES) { if (!dropdown && current_probe != AP->probes.end()) current_probe++; while (current_probe != AP->probes.end()) { // The protocol must be right, it must be a nonmatching port ('cause we did those), // and we better either have no soft match yet, or the soft service match must // be available via this probe. Also, the Probe's rarity must be <= to our // version detection intensity level. if ((proto == (*current_probe)->getProbeProtocol()) && !(*current_probe)->portIsProbable(tunnel, portno) && (*current_probe)->getRarity() <= o.version_intensity && (!softMatchFound || (*current_probe)->serviceIsPossible(probe_matched))) { // Valid, probe. Let's do it! return *current_probe; } current_probe++; } // Tried all NONMATCHINGPROBES -- we're finished probe_state = (softMatchFound)? PROBESTATE_FINISHED_SOFTMATCHED : PROBESTATE_FINISHED_NOMATCH; return NULL; } fatal("%s called for probe in state (%d)", __func__, (int) probe_state); return NULL; } // Resets the probes back to the first one. One case where this is useful is // when SSL is detected -- we redo all probes through SSL. If freeFP, any // service fingerprint is freed too. void ServiceNFO::resetProbes(bool freefp) { if (currentresp) free(currentresp); if (freefp) { if (servicefp) { free(servicefp); servicefp = NULL; } servicefplen = servicefpalloc = 0; } currentresp = NULL; currentresplen = 0; probe_state = PROBESTATE_INITIAL; } int ServiceNFO::probe_timemsused(const ServiceProbe *probe, const struct timeval *now) { int timeused; if (now) timeused = TIMEVAL_MSEC_SUBTRACT(*now, currentprobe_exec_time); else { struct timeval tv; gettimeofday(&tv, NULL); timeused = TIMEVAL_MSEC_SUBTRACT(tv, currentprobe_exec_time); } // Historically this function was always called with the assumption that // probe == currentProbe(). Check that this remains the case. assert(probe == currentProbe()); return timeused; } int ServiceNFO::probe_timemsleft(const ServiceProbe *probe, const struct timeval *now) { // Historically this function was always called with the assumption that // probe == currentProbe(). Check that this remains the case. assert(probe == currentProbe()); int timeleft = probe->totalwaitms - probe_timemsused(probe, now); return (timeleft < 0)? 0 : timeleft; } void ServiceNFO::appendtocurrentproberesponse(const u8 *respstr, int respstrlen) { currentresp = (u8 *) safe_realloc(currentresp, currentresplen + respstrlen); memcpy(currentresp + currentresplen, respstr, respstrlen); currentresplen += respstrlen; } // Get the full current response string. Note that this pointer is // INVALIDATED if you call appendtocurrentproberesponse() or nextProbe() u8 *ServiceNFO::getcurrentproberesponse(int *respstrlen) { *respstrlen = currentresplen; return currentresp; } ServiceGroup::ServiceGroup(std::vector &Targets, AllProbes *AP) { unsigned int targetno; ServiceNFO *svc; Port *nxtport; Port port; int desired_par; struct timeval now; num_hosts_timedout = 0; gettimeofday(&now, NULL); for(targetno = 0 ; targetno < Targets.size(); targetno++) { nxtport = NULL; if (Targets[targetno]->timedOut(&now)) { num_hosts_timedout++; continue; } while((nxtport = Targets[targetno]->ports.nextPort(nxtport, &port, TCPANDUDPANDSCTP, PORT_OPEN))) { svc = new ServiceNFO(AP); svc->target = Targets[targetno]; svc->portno = nxtport->portno; svc->proto = nxtport->proto; services_remaining.push_back(svc); } } /* Use a whole new loop for PORT_OPENFILTERED so that we try all the known open ports first before bothering with this speculative stuff */ for(targetno = 0 ; targetno < Targets.size(); targetno++) { nxtport = NULL; if (Targets[targetno]->timedOut(&now)) { continue; } while((nxtport = Targets[targetno]->ports.nextPort(nxtport, &port, TCPANDUDPANDSCTP, PORT_OPENFILTERED))) { svc = new ServiceNFO(AP); svc->target = Targets[targetno]; svc->portno = nxtport->portno; svc->proto = nxtport->proto; services_remaining.push_back(svc); } } SPM = new ScanProgressMeter("Service scan"); desired_par = 1; if (o.timing_level == 3) desired_par = 20; if (o.timing_level == 4) desired_par = 30; if (o.timing_level >= 5) desired_par = 40; // TODO: Come up with better ways to determine ideal_parallelism int min_par, max_par; min_par = o.min_parallelism; max_par = MAX(min_par, o.max_parallelism ? o.max_parallelism : 100); ideal_parallelism = box(min_par, max_par, desired_par); } ServiceGroup::~ServiceGroup() { std::list::iterator i; for(i = services_finished.begin(); i != services_finished.end(); i++) delete *i; for(i = services_in_progress.begin(); i != services_in_progress.end(); i++) delete *i; for(i = services_remaining.begin(); i != services_remaining.end(); i++) delete *i; delete SPM; } /* Called if data is read for a service or a TCP connection made. Sets the port state to PORT_OPEN. */ static void adjustPortStateIfNecessary(ServiceNFO *svc) { int oldstate; char host[128]; oldstate = svc->target->ports.getPortState(svc->portno, svc->proto); if (oldstate != PORT_OPEN) { svc->target->ports.setPortState(svc->portno, svc->proto, PORT_OPEN); if (svc->proto == IPPROTO_TCP) svc->target->ports.setStateReason(svc->portno, svc->proto, ER_TCPRESPONSE, 0, NULL); if (svc->proto == IPPROTO_UDP) svc->target->ports.setStateReason(svc->portno, svc->proto, ER_UDPRESPONSE, 0, NULL); if (o.verbose || o.debugging > 1) { svc->target->NameIP(host, sizeof(host)); log_write(LOG_STDOUT, "Discovered %s port %hu/%s on %s is actually open\n", statenum2str(oldstate), svc->portno, proto2ascii_lowercase(svc->proto), host); log_flush(LOG_STDOUT); } } return; } // Sends probe text to an open connection. In the case of a NULL probe, there // may be no probe text static int send_probe_text(nsock_pool nsp, nsock_iod nsi, ServiceNFO *svc, ServiceProbe *probe) { const u8 *probestring; int probestringlen; // Report data as probes are sent if --version-trace has been requested if (o.debugging > 1 || o.versionTrace()) { log_write(LOG_PLAIN, "Service scan sending probe %s to %s:%hu (%s)\n", probe->getName(), svc->target->targetipstr(), svc->portno, proto2ascii_lowercase(svc->proto)); } assert(probe); if (probe->isNullProbe()) return 0; // No need to send anything for a NULL probe; probestring = probe->getProbeString(&probestringlen); assert(probestringlen > 0); // Now we write the string to the IOD nsock_write(nsp, nsi, servicescan_write_handler, svc->probe_timemsleft(probe), svc, (const char *) probestring, probestringlen); return 0; } // This simple helper function is used to start the next probe. If // the probe exists, execution begins (and the previous one is cleaned // up if necessary) . Otherwise, the service is listed as finished // and moved to the finished list. If you pass 'true' for alwaysrestart, a // new connection will be made even if the previous probe was the NULL probe. // You would do this, for example, if the other side has closed the connection. static void startNextProbe(nsock_pool nsp, nsock_iod nsi, ServiceGroup *SG, ServiceNFO *svc, bool alwaysrestart) { bool isInitial = svc->probe_state == PROBESTATE_INITIAL; ServiceProbe *probe = svc->currentProbe(); struct sockaddr_storage ss; size_t ss_len; if (!alwaysrestart && probe->isNullProbe()) { // The difference here is that we can reuse the same (TCP) connection // if the last probe was the NULL probe. probe = svc->nextProbe(false); if (probe) { svc->currentprobe_exec_time = *nsock_gettimeofday(); send_probe_text(nsp, nsi, svc, probe); nsock_read(nsp, nsi, servicescan_read_handler, svc->probe_timemsleft(probe, nsock_gettimeofday()), svc); } else { // Should only happen if someone has a highly perverse nmap-service-probes // file. Null scan should generally never be the only probe. end_svcprobe(nsp, (svc->softMatchFound)? PROBESTATE_FINISHED_SOFTMATCHED : PROBESTATE_FINISHED_NOMATCH, SG, svc, NULL); } } else { // The finished probe was not a NULL probe. So we close the // connection, and if further probes are available, we launch the // next one. if (!isInitial) probe = svc->nextProbe(true); // if was initial, currentProbe() returned the right one to execute. if (probe) { // For a TCP probe, we start by requesting a new connection to the target if (svc->proto == IPPROTO_TCP) { nsock_iod_delete(nsi, NSOCK_PENDING_SILENT); if ((svc->niod = nsock_iod_new(nsp, svc)) == NULL) { fatal("Failed to allocate Nsock I/O descriptor in %s()", __func__); } if (o.spoofsource) { o.SourceSockAddr(&ss, &ss_len); nsock_iod_set_localaddr(svc->niod, &ss, ss_len); } if (o.ipoptionslen) nsock_iod_set_ipoptions(svc->niod, o.ipoptions, o.ipoptionslen); if (svc->target->TargetName()) { if (nsock_iod_set_hostname(svc->niod, svc->target->TargetName()) == -1) fatal("nsock_iod_set_hostname(\"%s\" failed in %s()", svc->target->TargetName(), __func__); } svc->target->TargetSockAddr(&ss, &ss_len); if (svc->tunnel == SERVICE_TUNNEL_NONE) { nsock_connect_tcp(nsp, svc->niod, servicescan_connect_handler, DEFAULT_CONNECT_TIMEOUT, svc, (struct sockaddr *) &ss, ss_len, svc->portno); } else { assert(svc->tunnel == SERVICE_TUNNEL_SSL); nsock_connect_ssl(nsp, svc->niod, servicescan_connect_handler, DEFAULT_CONNECT_SSL_TIMEOUT, svc, (struct sockaddr *) &ss, ss_len, svc->proto, svc->portno, svc->ssl_session); } } else { assert(svc->proto == IPPROTO_UDP); /* Can maintain the same UDP "connection" */ svc->currentprobe_exec_time = *nsock_gettimeofday(); send_probe_text(nsp, nsi, svc, probe); // Now let us read any results nsock_read(nsp, nsi, servicescan_read_handler, svc->probe_timemsleft(probe, nsock_gettimeofday()), svc); } } else { // No more probes remaining! Failed to match nsock_iod_delete(nsi, NSOCK_PENDING_SILENT); end_svcprobe(nsp, (svc->softMatchFound)? PROBESTATE_FINISHED_SOFTMATCHED : PROBESTATE_FINISHED_NOMATCH, SG, svc, NULL); } } return; } /* Sometimes the normal service scan will detect a tunneling/encryption protocol such as SSL. Instead of just reporting "ssl", we can make an SSL connection and try to determine the service that is really sitting behind the SSL. This function will take a service that has just been detected (hard match only), and see if we can dig deeper through tunneling. Nonzero is returned if we can do more. Otherwise 0 is returned and the caller should end the service with its successful match. If the tunnel results can be determined with no more effort, 0 is also returned. For example, a service that already matched as "ssl/ldap" will be changed to "ldap" with the tunnel being SSL and 0 will be returned. That is a special case. */ static int scanThroughTunnel(nsock_pool nsp, nsock_iod nsi, ServiceGroup *SG, ServiceNFO *svc) { if (svc->probe_matched && strncmp(svc->probe_matched, "ssl/", 4) == 0) { /* The service has been detected without having to make an SSL connection */ svc->tunnel = SERVICE_TUNNEL_SSL; svc->probe_matched += 4; return 0; } #ifdef HAVE_OPENSSL if (svc->tunnel != SERVICE_TUNNEL_NONE) { // Another tunnel type has already been tried. Let's not go recursive. return 0; } if (svc->proto != IPPROTO_TCP || !svc->probe_matched || strcmp(svc->probe_matched, "ssl") != 0) return 0; // Not SSL // Alright! We are going to start the tests over using SSL // printf("DBG: Found SSL service on %s:%hu - starting SSL scan\n", svc->target->NameIP(), svc->portno); svc->tunnel = SERVICE_TUNNEL_SSL; svc->probe_matched = NULL; svc->product_matched[0] = svc->version_matched[0] = svc->extrainfo_matched[0] = '\0'; svc->hostname_matched[0] = svc->ostype_matched[0] = svc->devicetype_matched[0] = '\0'; svc->cpe_a_matched[0] = svc->cpe_h_matched[0] = svc->cpe_o_matched[0] = '\0'; svc->softMatchFound = false; svc->resetProbes(true); startNextProbe(nsp, nsi, SG, svc, true); return 1; #else return 0; #endif } /* Prints completion estimates and the like when appropriate */ static void considerPrintingStats(nsock_pool nsp, ServiceGroup *SG) { /* Check for status requests */ if (keyWasPressed()) { nmap_adjust_loglevel(o.versionTrace()); SG->SPM->printStats(SG->services_finished.size() / ((double)SG->services_remaining.size() + SG->services_in_progress.size() + SG->services_finished.size()), nsock_gettimeofday()); } /* Perhaps this should be made more complex, but I suppose it should be good enough for now. */ if (SG->SPM->mayBePrinted(nsock_gettimeofday())) { SG->SPM->printStatsIfNecessary(SG->services_finished.size() / ((double)SG->services_remaining.size() + SG->services_in_progress.size() + SG->services_finished.size()), nsock_gettimeofday()); } } /* Check if target is done (no more probes remaining for it in service group), and responds appropriately if so */ static void handleHostIfDone(ServiceGroup *SG, Target *target) { std::list::iterator svcI; bool found = false; for(svcI = SG->services_in_progress.begin(); svcI != SG->services_in_progress.end(); svcI++) { if ((*svcI)->target == target) { found = true; break; } } for(svcI = SG->services_remaining.begin(); !found && svcI != SG->services_remaining.end(); svcI++) { if ((*svcI)->target == target) { found = true; break; } } if (!found) { target->stopTimeOutClock(nsock_gettimeofday()); if (target->timedOut(NULL)) { SG->num_hosts_timedout++; } } } // A simple helper function to cancel further work on a service and // set it to the given probe_state pass NULL for nsi if you don't want // it to be deleted (for example, if you already have done so). static void end_svcprobe(nsock_pool nsp, enum serviceprobestate probe_state, ServiceGroup *SG, ServiceNFO *svc, nsock_iod nsi) { std::list::iterator member; Target *target = svc->target; svc->probe_state = svc->tcpwrap_possible ? PROBESTATE_FINISHED_TCPWRAPPED : probe_state; member = find(SG->services_in_progress.begin(), SG->services_in_progress.end(), svc); if (member != SG->services_in_progress.end()) { assert(*member == svc); SG->services_in_progress.erase(member); } else { /* A probe can finish from services_remaining if the host times out before the probe has even started */ member = find(SG->services_remaining.begin(), SG->services_remaining.end(), svc); assert(member != SG->services_remaining.end()); assert(*member == svc); SG->services_remaining.erase(member); } SG->services_finished.push_back(svc); considerPrintingStats(nsp, SG); if (nsi) nsock_iod_delete(nsi, NSOCK_PENDING_SILENT); handleHostIfDone(SG, target); return; } // This function consults the ServiceGroup to determine whether any // more probes can be launched at this time. If so, it determines the // appropriate ones and then starts them up. static int launchSomeServiceProbes(nsock_pool nsp, ServiceGroup *SG) { ServiceNFO *svc; ServiceProbe *nextprobe; struct sockaddr_storage ss; size_t ss_len; static int warn_no_scanning=1; while (SG->services_in_progress.size() < SG->ideal_parallelism && !SG->services_remaining.empty()) { // Start executing a probe from the new list and move it to in_progress svc = SG->services_remaining.front(); if (svc->target->timedOut(nsock_gettimeofday())) { end_svcprobe(nsp, PROBESTATE_INCOMPLETE, SG, svc, NULL); continue; } nextprobe = svc->nextProbe(true); if (nextprobe == NULL) { if (warn_no_scanning && o.debugging) { log_write(LOG_PLAIN, "Service scan: Not probing some ports due to low intensity\n"); warn_no_scanning=0; } end_svcprobe(nsp, PROBESTATE_FINISHED_NOMATCH, SG, svc, NULL); continue; } // We start by requesting a connection to the target if ((svc->niod = nsock_iod_new(nsp, svc)) == NULL) { fatal("Failed to allocate Nsock I/O descriptor in %s()", __func__); } if (o.debugging > 1) { log_write(LOG_PLAIN, "Starting probes against new service: %s:%hu (%s)\n", svc->target->targetipstr(), svc->portno, proto2ascii_lowercase(svc->proto)); } if (o.spoofsource) { o.SourceSockAddr(&ss, &ss_len); nsock_iod_set_localaddr(svc->niod, &ss, ss_len); } if (o.ipoptionslen) nsock_iod_set_ipoptions(svc->niod, o.ipoptions, o.ipoptionslen); svc->target->TargetSockAddr(&ss, &ss_len); if (svc->proto == IPPROTO_TCP) nsock_connect_tcp(nsp, svc->niod, servicescan_connect_handler, DEFAULT_CONNECT_TIMEOUT, svc, (struct sockaddr *)&ss, ss_len, svc->portno); else { assert(svc->proto == IPPROTO_UDP); nsock_connect_udp(nsp, svc->niod, servicescan_connect_handler, svc, (struct sockaddr *) &ss, ss_len, svc->portno); } // Check that the service is still where we left it. // servicescan_connect_handler can call end_svcprobe before this point, // putting it into services_finished already. if (!SG->services_remaining.empty() && SG->services_remaining.front() == svc) { // Now remove it from the remaining service list SG->services_remaining.pop_front(); // And add it to the in progress list SG->services_in_progress.push_back(svc); } } return 0; } static void servicescan_connect_handler(nsock_pool nsp, nsock_event nse, void *mydata) { nsock_iod nsi = nse_iod(nse); enum nse_status status = nse_status(nse); enum nse_type type = nse_type(nse); ServiceNFO *svc = (ServiceNFO *) mydata; ServiceProbe *probe = svc->currentProbe(); ServiceGroup *SG = (ServiceGroup *) nsock_pool_get_udata(nsp); assert(type == NSE_TYPE_CONNECT || type == NSE_TYPE_CONNECT_SSL); if (svc->target->timedOut(nsock_gettimeofday())) { end_svcprobe(nsp, PROBESTATE_INCOMPLETE, SG, svc, nsi); } else if (status == NSE_STATUS_SUCCESS) { #if HAVE_OPENSSL // Snag our SSL_SESSION from the nsi for use in subsequent connections. if (nsock_iod_check_ssl(nsi)) { if (svc->ssl_session) { if (svc->ssl_session == (SSL_SESSION *)(nsock_iod_get_ssl_session(nsi, 0))) { //nada } else { SSL_SESSION_free((SSL_SESSION*)svc->ssl_session); svc->ssl_session = (SSL_SESSION *)(nsock_iod_get_ssl_session(nsi, 1)); } } else { svc->ssl_session = (SSL_SESSION *)(nsock_iod_get_ssl_session(nsi, 1)); } } #endif /* If the port is TCP, it is now known to be open rather than openfiltered */ if (svc->proto == IPPROTO_TCP) adjustPortStateIfNecessary(svc); // Yeah! Connection made to the port. Send the appropriate probe // text (if any is needed -- might be NULL probe) svc->currentprobe_exec_time = *nsock_gettimeofday(); send_probe_text(nsp, nsi, svc, probe); // Now let us read any results nsock_read(nsp, nsi, servicescan_read_handler, svc->probe_timemsleft(probe, nsock_gettimeofday()), svc); } else { switch(status) { case NSE_STATUS_TIMEOUT: case NSE_STATUS_ERROR: case NSE_STATUS_PROXYERROR: // This is not good. The connect() really shouldn't generally // be timing out like that. We'll mark this svc as incomplete // and move it to the finished bin. if (o.debugging) error("Got nsock CONNECT response with status %s - aborting this service", nse_status2str(status)); end_svcprobe(nsp, PROBESTATE_INCOMPLETE, SG, svc, nsi); break; case NSE_STATUS_KILL: /* User probably specified host_timeout and so the service scan is * shutting down */ end_svcprobe(nsp, PROBESTATE_INCOMPLETE, SG, svc, nsi); return; default: fatal("Unexpected nsock status (%d) returned for connection attempt", (int)status); } } // We may have room for more probes! launchSomeServiceProbes(nsp, SG); return; } static void servicescan_write_handler(nsock_pool nsp, nsock_event nse, void *mydata) { enum nse_status status = nse_status(nse); nsock_iod nsi; ServiceNFO *svc = (ServiceNFO *)mydata; ServiceGroup *SG; int err; SG = (ServiceGroup *) nsock_pool_get_udata(nsp); nsi = nse_iod(nse); // Check if a status message was requested if (keyWasPressed()) { SG->SPM->printStats(SG->services_finished.size() / ((double)SG->services_remaining.size() + SG->services_in_progress.size() + SG->services_finished.size()), nsock_gettimeofday()); } if (svc->target->timedOut(nsock_gettimeofday())) { end_svcprobe(nsp, PROBESTATE_INCOMPLETE, SG, svc, nsi); return; } if (status == NSE_STATUS_SUCCESS) return; if (status == NSE_STATUS_KILL) { /* User probably specified host_timeout and so the service scan is shutting down */ end_svcprobe(nsp, PROBESTATE_INCOMPLETE, SG, svc, nsi); return; } if (status == NSE_STATUS_ERROR || status == NSE_STATUS_PROXYERROR) { err = nse_errorcode(nse); error("Got nsock WRITE error #%d (%s)", err, strerror(err)); } // Uh-oh. Some sort of write failure ... maybe the connection closed // on us unexpectedly? if (o.debugging) error("Got nsock WRITE response with status %s - aborting this service", nse_status2str(status)); end_svcprobe(nsp, PROBESTATE_INCOMPLETE, SG, svc, nsi); // We may have room for more probes! launchSomeServiceProbes(nsp, SG); return; } static void servicescan_read_handler(nsock_pool nsp, nsock_event nse, void *mydata) { nsock_iod nsi = nse_iod(nse); enum nse_status status = nse_status(nse); enum nse_type type = nse_type(nse); ServiceNFO *svc = (ServiceNFO *) mydata; ServiceProbe *probe = svc->currentProbe(); ServiceGroup *SG = (ServiceGroup *) nsock_pool_get_udata(nsp); const u8 *readstr; int readstrlen; const struct MatchDetails *MD; int fallbackDepth=0; assert(type == NSE_TYPE_READ); if (svc->target->timedOut(nsock_gettimeofday())) { svc->tcpwrap_possible = false; end_svcprobe(nsp, PROBESTATE_INCOMPLETE, SG, svc, nsi); } else if (status == NSE_STATUS_SUCCESS) { // w00p, w00p, we read something back from the port. svc->tcpwrap_possible = false; readstr = (u8 *) nse_readbuf(nse, &readstrlen); adjustPortStateIfNecessary(svc); /* A response means PORT_OPENFILTERED is really PORT_OPEN */ svc->appendtocurrentproberesponse(readstr, readstrlen); // now get the full version readstr = svc->getcurrentproberesponse(&readstrlen); for (MD = NULL; probe->fallbacks[fallbackDepth] != NULL; fallbackDepth++) { MD = (probe->fallbacks[fallbackDepth])->testMatch(readstr, readstrlen); if (MD && MD->serviceName) break; // Found one! } if (MD && MD->serviceName) { // WOO HOO!!!!!! MATCHED! But might be soft if (MD->isSoft && svc->probe_matched) { if (strcmp(svc->probe_matched, MD->serviceName) != 0) error("WARNING: Service %s:%hu had already soft-matched %s, but now soft-matched %s; ignoring second value", svc->target->targetipstr(), svc->portno, svc->probe_matched, MD->serviceName); // No error if its the same - that happens frequently. For // example, if we read more data for the same probe response // it will probably still match. } else { if (o.debugging > 1 || o.versionTrace()) { if (MD->product || MD->version || MD->info) log_write(LOG_PLAIN, "Service scan match (Probe %s matched with %s line %d): %s:%hu is %s%s. Version: |%s|%s|%s|\n", probe->getName(), (*probe->fallbacks[fallbackDepth]).getName(), MD->lineno, svc->target->targetipstr(), svc->portno, (svc->tunnel == SERVICE_TUNNEL_SSL)? "SSL/" : "", MD->serviceName, (MD->product)? MD->product : "", (MD->version)? MD->version : "", (MD->info)? MD->info : ""); else log_write(LOG_PLAIN, "Service scan %s match (Probe %s matched with %s line %d): %s:%hu is %s%s\n", (MD->isSoft)? "soft" : "hard", probe->getName(), (*probe->fallbacks[fallbackDepth]).getName(), MD->lineno, svc->target->targetipstr(), svc->portno, (svc->tunnel == SERVICE_TUNNEL_SSL)? "SSL/" : "", MD->serviceName); } svc->probe_matched = MD->serviceName; if (MD->product) Strncpy(svc->product_matched, MD->product, sizeof(svc->product_matched)); if (MD->version) Strncpy(svc->version_matched, MD->version, sizeof(svc->version_matched)); if (MD->info) Strncpy(svc->extrainfo_matched, MD->info, sizeof(svc->extrainfo_matched)); if (MD->hostname) Strncpy(svc->hostname_matched, MD->hostname, sizeof(svc->hostname_matched)); if (MD->ostype) Strncpy(svc->ostype_matched, MD->ostype, sizeof(svc->ostype_matched)); if (MD->devicetype) Strncpy(svc->devicetype_matched, MD->devicetype, sizeof(svc->devicetype_matched)); if (MD->cpe_a) Strncpy(svc->cpe_a_matched, MD->cpe_a, sizeof(svc->cpe_a_matched)); if (MD->cpe_h) Strncpy(svc->cpe_h_matched, MD->cpe_h, sizeof(svc->cpe_h_matched)); if (MD->cpe_o) Strncpy(svc->cpe_o_matched, MD->cpe_o, sizeof(svc->cpe_o_matched)); svc->softMatchFound = MD->isSoft; if (!svc->softMatchFound) { // We might be able to continue scan through a tunnel protocol // like SSL if (scanThroughTunnel(nsp, nsi, SG, svc) == 0) end_svcprobe(nsp, PROBESTATE_FINISHED_HARDMATCHED, SG, svc, nsi); } } } if (!MD || !MD->serviceName || MD->isSoft) { // Didn't match... maybe reading more until timeout will help // TODO: For efficiency I should be able to test if enough data // has been received rather than always waiting for the reading // to timeout. For now I'll limit it to 4096 bytes just to // avoid reading megs from services like chargen. But better // approach is needed. if (svc->probe_timemsleft(probe) > 0 && readstrlen < 4096) { nsock_read(nsp, nsi, servicescan_read_handler, svc->probe_timemsleft(probe), svc); } else { // Failed -- lets go to the next probe. if (readstrlen > 0) svc->addToServiceFingerprint(probe->getName(), readstr, readstrlen); startNextProbe(nsp, nsi, SG, svc, false); } } } else if (status == NSE_STATUS_TIMEOUT) { // Failed to read enough to make a match in the given amount of time. So we // move on to the next probe. If this was a NULL probe, we can simply // send the new probe text immediately. Otherwise we make a new connection. svc->tcpwrap_possible = false; readstr = svc->getcurrentproberesponse(&readstrlen); if (readstrlen > 0) svc->addToServiceFingerprint(svc->currentProbe()->getName(), readstr, readstrlen); startNextProbe(nsp, nsi, SG, svc, false); } else if (status == NSE_STATUS_EOF) { // The jerk closed on us during read request! // If this was during the NULL probe, let's (for now) assume // the port is TCP wrapped. Otherwise, we'll treat it as a nomatch readstr = svc->getcurrentproberesponse(&readstrlen); if (readstrlen > 0) { svc->addToServiceFingerprint(svc->currentProbe()->getName(), readstr, readstrlen); svc->tcpwrap_possible = false; } if (svc->tcpwrap_possible && probe->isNullProbe() && readstrlen == 0 && svc->probe_timemsused(probe) < probe->tcpwrappedms) { // TODO: Perhaps should do further verification before making this assumption end_svcprobe(nsp, PROBESTATE_FINISHED_TCPWRAPPED, SG, svc, nsi); } else { // Perhaps this service didn't like the particular probe text. // We'll try the next one startNextProbe(nsp, nsi, SG, svc, true); } } else if (status == NSE_STATUS_ERROR) { // Errors might happen in some cases ... I'll worry about later int err = nse_errorcode(nse); switch(err) { case ECONNRESET: case ECONNREFUSED: // weird to get this on a connected socket (shrug) but // BSD sometimes gives it case ECONNABORTED: // Jerk hung up on us. Probably didn't like our probe. We treat it as with EOF above. if (svc->tcpwrap_possible && probe->isNullProbe() && svc->probe_timemsused(probe) < probe->tcpwrappedms) { // TODO: Perhaps should do further verification before making this assumption end_svcprobe(nsp, PROBESTATE_FINISHED_TCPWRAPPED, SG, svc, nsi); } else { // Perhaps this service didn't like the particular probe text. We'll try the // next one startNextProbe(nsp, nsi, SG, svc, true); } break; #ifdef EHOSTDOWN case EHOSTDOWN: // ICMP_HOST_UNKNOWN #endif #ifdef ENONET case ENONET: // ICMP_HOST_ISOLATED #endif /* EHOSTDOWN and ENONET can be the result of forged ICMP responses. * We should probably give up on this port. */ case ENETUNREACH: case EHOSTUNREACH: // That is funny. The port scanner listed the port as open. Maybe it got unplugged, or firewalled us, or did // something else nasty during the scan. Shrug. I'll give up on this port svc->tcpwrap_possible = false; end_svcprobe(nsp, PROBESTATE_INCOMPLETE, SG, svc, nsi); break; #ifdef ENOPROTOOPT case ENOPROTOOPT: // ICMP_PROT_UNREACH #endif case EMSGSIZE: // ICMP_FRAG_NEEDED case EOPNOTSUPP: // ICMP_SR_FAILED /* EPROTOOPT has been reported in the wild. EMSGSIZE and EOPNOTSUPP are theoretically * possible responses due to forged ICMP responses. * These seem packet-specific, not a result of the host shutting us out completely. * We'll try some other probes. */ #ifndef WIN32 case EPIPE: #endif case ENETRESET: //This error (same as WSAENETRESET according to nbase_winunix) is Microsoft only error, where the connected host crashes and then resets during the communication //More information can be found at http://www.sockets.com/err_lst1.htm#WSAENETRESET. //I assume that we shouldn't bother doing anything beyond catching it, and then going on to the next probe. #ifdef EPROTO case EPROTO: // EPROTO is suspected to be caused by an active IDS/IPS that forges ICMP // type-12 errors ("Parameter problem"). It's been seen in response to the // Sqlping probe. #endif case EIO: // Usually an SSL error of some sort (those are presently // hardcoded to EIO). I'll just try the next probe. startNextProbe(nsp, nsi, SG, svc, true); break; default: fatal("Unexpected error in NSE_TYPE_READ callback. Error code: %d (%s)", err, socket_strerror(err)); } } else if (status == NSE_STATUS_KILL) { /* User probably specified host_timeout and so the service scan is shutting down */ svc->tcpwrap_possible = false; end_svcprobe(nsp, PROBESTATE_INCOMPLETE, SG, svc, nsi); return; } else { fatal("Unexpected status (%d) in NSE_TYPE_READ callback.", (int) status); } // We may have room for more probes! launchSomeServiceProbes(nsp, SG); return; } // This is used in processResults to determine whether a FP // should be printed based on type of match, version intensity, etc. static int shouldWePrintFingerprint(ServiceNFO *svc) { // Never print FP if hardmatched if (svc->probe_state == PROBESTATE_FINISHED_HARDMATCHED) return 0; // If we were called with a version_intensity less than // the default, don't bother printing. if (o.version_intensity < 7) return 0; return 1; } // This is passed a completed ServiceGroup which contains the scanning results for every service. // The function iterates through each finished service and adds the results to Target structure for // Nmap to output later. static void processResults(ServiceGroup *SG) { std::list::iterator svc; for(svc = SG->services_finished.begin(); svc != SG->services_finished.end(); svc++) { if ((*svc)->probe_state != PROBESTATE_FINISHED_NOMATCH) { std::vector cpe; if (*(*svc)->cpe_a_matched) cpe.push_back((*svc)->cpe_a_matched); if (*(*svc)->cpe_h_matched) cpe.push_back((*svc)->cpe_h_matched); if (*(*svc)->cpe_o_matched) cpe.push_back((*svc)->cpe_o_matched); (*svc)->target->ports.setServiceProbeResults((*svc)->portno, (*svc)->proto, (*svc)->probe_state, (*svc)->probe_matched, (*svc)->tunnel, *(*svc)->product_matched? (*svc)->product_matched : NULL, *(*svc)->version_matched? (*svc)->version_matched : NULL, *(*svc)->extrainfo_matched? (*svc)->extrainfo_matched : NULL, *(*svc)->hostname_matched? (*svc)->hostname_matched : NULL, *(*svc)->ostype_matched? (*svc)->ostype_matched : NULL, *(*svc)->devicetype_matched? (*svc)->devicetype_matched : NULL, (cpe.size() > 0) ? &cpe : NULL, shouldWePrintFingerprint(*svc) ? (*svc)->getServiceFingerprint(NULL) : NULL); } else { (*svc)->target->ports.setServiceProbeResults((*svc)->portno, (*svc)->proto, (*svc)->probe_state, NULL, (*svc)->tunnel, NULL, NULL, NULL, NULL, NULL, NULL, NULL, (*svc)->getServiceFingerprint(NULL)); } } } /* Start the timeout clocks of any targets that have probes. Assumes that this is called before any probes have been launched (so they are all in services_remaining */ static void startTimeOutClocks(ServiceGroup *SG) { std::list::iterator svcI; Target *target = NULL; struct timeval tv; gettimeofday(&tv, NULL); for(svcI = SG->services_remaining.begin(); svcI != SG->services_remaining.end(); svcI++) { target = (*svcI)->target; if (!target->timeOutClockRunning()) target->startTimeOutClock(&tv); } } // We iterate through SG->services_remaining and remove any with port/protocol // pairs that are excluded. We use AP->isExcluded() to determine which ports // are excluded. static void remove_excluded_ports(AllProbes *AP, ServiceGroup *SG) { std::list::iterator i, nxt; ServiceNFO *svc; for(i = SG->services_remaining.begin(); i != SG->services_remaining.end(); i=nxt) { nxt = i; nxt++; svc = *i; if (AP->isExcluded(svc->portno, svc->proto)) { if (o.debugging) log_write(LOG_PLAIN, "EXCLUDING %d/%s\n", svc->portno, IPPROTO2STR(svc->proto)); svc->target->ports.setServiceProbeResults(svc->portno, svc->proto, PROBESTATE_EXCLUDED, NULL, SERVICE_TUNNEL_NONE, "Excluded from version scan", NULL, NULL, NULL, NULL, NULL, NULL, NULL); SG->services_remaining.erase(i); SG->services_finished.push_back(svc); } } } /* Execute a service fingerprinting scan against all open ports of the Targets specified. */ int service_scan(std::vector &Targets) { // int service_scan(Target *targets[], int num_targets) AllProbes *AP; ServiceGroup *SG; nsock_pool nsp; struct timeval now; int timeout; enum nsock_loopstatus looprc; struct timeval starttv; if (Targets.size() == 0) return 1; AP = AllProbes::service_scan_init(); // Now I convert the targets into a new ServiceGroup SG = new ServiceGroup(Targets, AP); if (o.override_excludeports) { if (o.debugging || o.verbose) log_write(LOG_PLAIN, "Overriding exclude ports option! Some undesirable ports may be version scanned!\n"); } else { remove_excluded_ports(AP, SG); } startTimeOutClocks(SG); if (SG->services_remaining.size() == 0) { delete SG; return 1; } gettimeofday(&starttv, NULL); if (o.verbose) { char targetstr[128]; bool plural = (Targets.size() != 1); if (!plural) { (*(Targets.begin()))->NameIP(targetstr, sizeof(targetstr)); } else Snprintf(targetstr, sizeof(targetstr), "%u hosts", (unsigned) Targets.size()); log_write(LOG_STDOUT, "Scanning %u %s on %s\n", (unsigned) SG->services_remaining.size(), (SG->services_remaining.size() == 1)? "service" : "services", targetstr); } // Lets create a nsock pool for managing all the concurrent probes // Store the servicegroup in there for availability in callbacks if ((nsp = nsock_pool_new(SG)) == NULL) { fatal("%s() failed to create new nsock pool.", __func__); } nsock_set_log_function(nmap_nsock_stderr_logger); nmap_adjust_loglevel(o.versionTrace()); nsock_pool_set_device(nsp, o.device); if (o.proxy_chain) { nsock_pool_set_proxychain(nsp, o.proxy_chain); } #if HAVE_OPENSSL /* We don't care about connection security in version detection. */ nsock_pool_ssl_init(nsp, NSOCK_SSL_MAX_SPEED); #endif launchSomeServiceProbes(nsp, SG); // How long do we have before timing out? gettimeofday(&now, NULL); timeout = -1; // OK! Lets start our main loop! looprc = nsock_loop(nsp, timeout); if (looprc == NSOCK_LOOP_ERROR) { int err = nsock_pool_get_error(nsp); fatal("Unexpected nsock_loop error. Error code %d (%s)", err, socket_strerror(err)); } nsock_pool_delete(nsp); if (o.verbose) { char additional_info[128]; if (SG->num_hosts_timedout == 0) Snprintf(additional_info, sizeof(additional_info), "%u %s on %u %s", (unsigned) SG->services_finished.size(), (SG->services_finished.size() == 1)? "service" : "services", (unsigned) Targets.size(), (Targets.size() == 1)? "host" : "hosts"); else Snprintf(additional_info, sizeof(additional_info), "%u %s timed out", SG->num_hosts_timedout, (SG->num_hosts_timedout == 1)? "host" : "hosts"); SG->SPM->endTask(NULL, additional_info); } // Yeah - done with the service scan. Now I go through the results // discovered, store the important info away, and free up everything // else. processResults(SG); delete SG; return 0; }