local datafiles = require "datafiles" local nmap = require "nmap" local shortport = require "shortport" local snmp = require "snmp" local stdnse = require "stdnse" local string = require "string" local table = require "table" local target = require "target" description = [[ Attempts to enumerate network interfaces through SNMP. This script can also be run during Nmap's pre-scanning phase and can attempt to add the SNMP server's interface addresses to the target list. The script argument snmp-interfaces.host is required to know what host to probe. To specify a port for the SNMP server other than 161, use snmp-interfaces.port. When run in this way, the script's output tells how many new targets were successfully added. ]] --- -- @usage -- nmap -sU -p 161 --script=snmp-interfaces -- @args snmp-interfaces.host Specifies the SNMP server to probe when -- running in the "pre-scanning phase". -- @args snmp-interfaces.port The optional port number corresponding -- to the host script argument. Defaults to 161. -- -- @output -- | snmp-interfaces: -- | eth0 -- | IP address: 192.168.221.128 -- | MAC address: 00:0c:29:01:e2:74 (VMware) -- | Type: ethernetCsmacd Speed: 1 Gbps -- |_ Traffic stats: 6.45 Mb sent, 15.01 Mb received -- author = "Thomas Buchanan, Kris Katterjohn" license = "Same as Nmap--See https://nmap.org/book/man-legal.html" categories = {"default", "discovery", "safe"} dependencies = {"snmp-brute"} -- code borrowed heavily from Patrik Karlsson's excellent snmp scripts -- Created 03/03/2010 - v0.1 - created by Thomas Buchanan -- Revised 03/05/2010 - v0.2 - Reworked output slightly, moved iana_types to script scope. Suggested by David Fifield -- Revised 04/11/2010 - v0.2 - moved snmp_walk to snmp library -- Revised 08/10/2010 - v0.3 - prerule; add interface addresses to Nmap's target list (Kris Katterjohn) -- Revised 05/27/2011 - v0.4 - action; add MAC addresses to nmap.registry[host.ip]["mac-geolocation"] (Gorjan Petrovski) -- Revised 07/31/2012 - v0.5 - action; remove mac-geolocation changes (script removed from trunk) prerule = function() if not stdnse.get_script_args({"snmp-interfaces.host", "host"}) then stdnse.debug3("Skipping '%s' %s, 'snmp-interfaces.host' argument is missing.", SCRIPT_NAME, SCRIPT_TYPE) return false end return true end portrule = shortport.portnumber(161, "udp", {"open", "open|filtered"}) -- List of IANA-assigned network interface types -- Taken from IANAifType-MIB -- Available at http://www.iana.org/assignments/ianaiftype-mib -- REVISION "201002110000Z" local iana_types = { "other", "regular1822", "hdh1822", "ddnX25", "rfc877x25", "ethernetCsmacd", "iso88023Csmacd", "iso88024TokenBus", "iso88025TokenRing", "iso88026Man", "starLan", "proteon10Mbit", "proteon80Mbit", "hyperchannel", "fddi", "lapb", "sdlc", "ds1", "e1", "basicISDN", "primaryISDN", "propPointToPointSerial", "ppp", "softwareLoopback", "eon", "ethernet3Mbit", "nsip", "slip", "ultra", "ds3", "sip", "frameRelay", "rs232", "para", "arcnet", "arcnetPlus", "atm", "miox25", "sonet", "x25ple", "iso88022llc", "localTalk", "smdsDxi", "frameRelayService", "v35", "hssi", "hippi", "modem", "aal5", "sonetPath", "sonetVT", "smdsIcip", "propVirtual", "propMultiplexor", "ieee80212", "fibreChannel", "hippiInterface", "frameRelayInterconnect", "aflane8023", "aflane8025", "cctEmul", "fastEther", "isdn", "v11", "v36", "g703at64k", "g703at2mb", "qllc", "fastEtherFX", "channel", "ieee80211", "ibm370parChan", "escon", "dlsw", "isdns", "isdnu", "lapd", "ipSwitch", "rsrb", "atmLogical", "ds0", "ds0Bundle", "bsc", "async", "cnr", "iso88025Dtr", "eplrs", "arap", "propCnls", "hostPad", "termPad", "frameRelayMPI", "x213", "adsl", "radsl", "sdsl", "vdsl", "iso88025CRFPInt", "myrinet", "voiceEM", "voiceFXO", "voiceFXS", "voiceEncap", "voiceOverIp", "atmDxi", "atmFuni", "atmIma", "pppMultilinkBundle", "ipOverCdlc", "ipOverClaw", "stackToStack", "virtualIpAddress", "mpc", "ipOverAtm", "iso88025Fiber", "tdlc", "gigabitEthernet", "hdlc", "lapf", "v37", "x25mlp", "x25huntGroup", "trasnpHdlc", "interleave", "fast", "ip", "docsCableMaclayer", "docsCableDownstream", "docsCableUpstream", "a12MppSwitch", "tunnel", "coffee", "ces", "atmSubInterface", "l2vlan", "l3ipvlan", "l3ipxvlan", "digitalPowerlinev", "mediaMailOverIp", "dtm", "dcn", "ipForward", "msdsl", "ieee1394", "if-gsn", "dvbRccMacLayer", "dvbRccDownstream", "dvbRccUpstream", "atmVirtual", "mplsTunnel", "srp", "voiceOverAtm", "voiceOverFrameRelay", "idsl", "compositeLink", "ss7SigLink", "propWirelessP2P", "frForward", "rfc1483", "usb", "ieee8023adLag", "bgppolicyaccounting", "frf16MfrBundle", "h323Gatekeeper", "h323Proxy", "mpls", "mfSigLink", "hdsl2", "shdsl", "ds1FDL", "pos", "dvbAsiIn", "dvbAsiOut", "plc", "nfas", "tr008", "gr303RDT", "gr303IDT", "isup", "propDocsWirelessMaclayer", "propDocsWirelessDownstream", "propDocsWirelessUpstream", "hiperlan2", "propBWAp2Mp", "sonetOverheadChannel", "digitalWrapperOverheadChannel", "aal2", "radioMAC", "atmRadio", "imt", "mvl", "reachDSL", "frDlciEndPt", "atmVciEndPt", "opticalChannel", "opticalTransport", "propAtm", "voiceOverCable", "infiniband", "teLink", "q2931", "virtualTg", "sipTg", "sipSig", "docsCableUpstreamChannel", "econet", "pon155", "pon622", "bridge", "linegroup", "voiceEMFGD", "voiceFGDEANA", "voiceDID", "mpegTransport", "sixToFour", "gtp", "pdnEtherLoop1", "pdnEtherLoop2", "opticalChannelGroup", "homepna", "gfp", "ciscoISLvlan", "actelisMetaLOOP", "fcipLink", "rpr", "qam", "lmp", "cblVectaStar", "docsCableMCmtsDownstream", "adsl2", "macSecControlledIF", "macSecUncontrolledIF", "aviciOpticalEther", "atmbond", "voiceFGDOS", "mocaVersion1", "ieee80216WMAN", "adsl2plus", "dvbRcsMacLayer", "dvbTdm", "dvbRcsTdma", "x86Laps", "wwanPP", "wwanPP2", "voiceEBS", "ifPwType", "ilan", "pip", "aluELP", "gpon", "vdsl2", "capwapDot11Profile", "capwapDot11Bss", "capwapWtpVirtualRadio" } --- Gets a value for the specified oid -- -- @param tbl table containing oid and value -- @param oid string containing the object id for which the value should be extracted -- @return value of relevant type or nil if oid was not found function get_value_from_table( tbl, oid ) for _, v in ipairs( tbl ) do if v.oid == oid then return v.value end end return nil end --- Gets the network interface type from a list of IANA approved types -- -- @param iana integer interface type returned from snmp result -- @return string description of interface type, or "Unknown" if type not found function get_iana_type( iana ) -- 254 types are currently defined -- if the requested type falls outside that range, reset to "other" if iana > 254 or iana < 1 then iana = 1 end return iana_types[iana] end --- Calculates the speed of the interface based on the snmp value -- -- @param speed value from IF-MIB::ifSpeed -- @return string description of speed function get_if_speed( speed ) local result -- GigE or 10GigE speeds if speed >= 1000000000 then result = string.format( "%d Gbps", speed / 1000000000) -- Common for 10 or 100 Mbit ethernet elseif speed >= 1000000 then result = string.format( "%d Mbps", speed / 1000000) -- Anything slower report in Kbps else result = string.format( "%d Kbps", speed / 1000) end return result end --- Calculates the amount of traffic passed through an interface based on the snmp value -- -- @param amount value from IF-MIB::ifInOctets or IF-MIB::ifOutOctets -- @return string description of traffic amount function get_traffic( amount ) local result -- Gigabytes if amount >= 1000000000 then result = string.format( "%.2f Gb", amount / 1000000000) -- Megabytes elseif amount >= 1000000 then result = string.format( "%.2f Mb", amount / 1000000) -- Anything lower report in kb else result = string.format( "%.2f Kb", amount / 1000) end return result end --- Converts a 6 byte string into the familiar MAC address formatting -- -- @param mac string containing the MAC address -- @return formatted string suitable for printing function get_mac_addr( mac ) local catch = function() return end local try = nmap.new_try(catch) local mac_prefixes = try(datafiles.parse_mac_prefixes()) if mac:len() ~= 6 then return "Unknown" else local prefix = string.upper(string.format("%02x%02x%02x", mac:byte(1), mac:byte(2), mac:byte(3))) local manuf = mac_prefixes[prefix] or "Unknown" return string.format("%s (%s)", stdnse.format_mac(mac:sub(1,6)), manuf ) end end --- Processes the list of network interfaces -- -- @param tbl table containing oid and value -- @return table with network interfaces described in key / value pairs function process_interfaces( tbl ) -- Add the %. escape character to prevent matching the index on e.g. "1.3.6.1.2.1.2.2.1.10." local if_index = "1.3.6.1.2.1.2.2.1.1%." local if_descr = "1.3.6.1.2.1.2.2.1.2." local if_type = "1.3.6.1.2.1.2.2.1.3." local if_speed = "1.3.6.1.2.1.2.2.1.5." local if_phys_addr = "1.3.6.1.2.1.2.2.1.6." local if_status = "1.3.6.1.2.1.2.2.1.8." local if_in_octets = "1.3.6.1.2.1.2.2.1.10." local if_out_octets = "1.3.6.1.2.1.2.2.1.16." local new_tbl = {} -- Some operating systems (such as MS Windows) don't list interfaces with consecutive indexes -- Therefore we keep an index list so we can iterate over the indexes later on new_tbl.index_list = {} for _, v in ipairs( tbl ) do if ( v.oid:match("^" .. if_index) ) then local item = {} item.index = get_value_from_table( tbl, v.oid ) local objid = v.oid:gsub( "^" .. if_index, if_descr) local value = get_value_from_table( tbl, objid ) if value and value:len() > 0 then item.descr = value end objid = v.oid:gsub( "^" .. if_index, if_type ) value = get_value_from_table( tbl, objid ) if value then item.type = get_iana_type(value) end objid = v.oid:gsub( "^" .. if_index, if_speed ) value = get_value_from_table( tbl, objid ) if value then item.speed = get_if_speed( value ) end objid = v.oid:gsub( "^" .. if_index, if_phys_addr ) value = get_value_from_table( tbl, objid ) if value and value:len() > 0 then item.phys_addr = get_mac_addr( value ) end objid = v.oid:gsub( "^" .. if_index, if_status ) value = get_value_from_table( tbl, objid ) if value == 1 then item.status = "up" elseif value == 2 then item.status = "down" end objid = v.oid:gsub( "^" .. if_index, if_in_octets ) value = get_value_from_table( tbl, objid ) if value then item.received = get_traffic( value ) end objid = v.oid:gsub( "^" .. if_index, if_out_octets ) value = get_value_from_table( tbl, objid ) if value then item.sent = get_traffic( value ) end new_tbl[item.index] = item -- Add this interface index to our master list table.insert( new_tbl.index_list, item.index ) end end return new_tbl end --- Processes the list of network interfaces and finds associated IP addresses -- -- @param if_tbl table containing network interfaces -- @param ip_tbl table containing oid and value pairs from IP::MIB -- @return table with network interfaces described in key / value pairs function process_ips( if_tbl, ip_tbl ) local ip_index = "1.3.6.1.2.1.4.20.1.2." local ip_addr = "1.3.6.1.2.1.4.20.1.1." local ip_netmask = "1.3.6.1.2.1.4.20.1.3." local index local item for _, v in ipairs( ip_tbl ) do if ( v.oid:match("^" .. ip_index) ) then index = get_value_from_table( ip_tbl, v.oid ) if not index then goto NEXT_PROCESS_IPS end item = if_tbl[index] if not item then stdnse.debug1("Unknown interface index %s", index) goto NEXT_PROCESS_IPS end local objid = v.oid:gsub( "^" .. ip_index, ip_addr ) local value = get_value_from_table( ip_tbl, objid ) if value then item.ip_addr = value end objid = v.oid:gsub( "^" .. ip_index, ip_netmask ) value = get_value_from_table( ip_tbl, objid ) if value then item.netmask = value end ::NEXT_PROCESS_IPS:: end end return if_tbl end --- Creates a table of IP addresses from the table of network interfaces -- -- @param tbl table containing network interfaces -- @return table containing only IP addresses function list_addrs( tbl ) local new_tbl = {} for _, index in ipairs( tbl.index_list ) do local interface = tbl[index] if interface.ip_addr then table.insert( new_tbl, interface.ip_addr ) end end return new_tbl end --- Process the table of network interfaces for reporting -- -- @param tbl table containing network interfaces -- @return table suitable for stdnse.format_output function build_results( tbl ) local new_tbl = {} local verbose = nmap.verbosity() -- For each interface index previously discovered, format the relevant information for output for _, index in ipairs( tbl.index_list ) do local interface = tbl[index] local item = {} local status = interface.status local if_type = interface.type if interface.descr then item.name = interface.descr else item.name = string.format("Interface %d", index) end if interface.ip_addr and interface.netmask then table.insert( item, ("IP address: %s Netmask: %s"):format( interface.ip_addr, interface.netmask ) ) end if interface.phys_addr then table.insert( item, ("MAC address: %s"):format( interface.phys_addr ) ) end if interface.type and interface.speed then table.insert( item, ("Type: %s Speed: %s"):format( interface.type, interface.speed ) ) end if ( verbose > 0 ) and interface.status then table.insert( item, ("Status: %s"):format( interface.status ) ) end if interface.sent and interface.received then table.insert( item, ("Traffic stats: %s sent, %s received"):format( interface.sent, interface.received ) ) end if ( verbose > 0 ) or status == "up" then table.insert( new_tbl, item ) end end return new_tbl end action = function(host, port) -- IF-MIB - used to look up network interfaces local if_oid = "1.3.6.1.2.1.2.2.1" -- IP-MIB - used to determine IP address information local ip_oid = "1.3.6.1.2.1.4.20" local interfaces = {} local ips = {} local status local srvhost, srvport if SCRIPT_TYPE == "prerule" then srvhost = stdnse.get_script_args({"snmp-interfaces.host", "host"}) if not srvhost then -- Shouldn't happen; checked in prerule. return end srvport = stdnse.get_script_args({"snmp-interfaces.port", "port"}) if srvport then srvport = { number=tonumber(srvport), protocol="udp" } else srvport = { number=tonumber(srvport), protocol="udp" } end else srvhost = host.ip srvport = port.number end local snmpHelper = snmp.Helper:new(host, port) snmpHelper:connect() -- retrieve network interface information from IF-MIB status, interfaces = snmpHelper:walk(if_oid) if (not(status)) or ( interfaces == nil ) or ( #interfaces == 0 ) then return end stdnse.debug1("SNMP walk of IF-MIB returned %d lines", #interfaces) -- build a table of network interfaces from the IF-MIB table interfaces = process_interfaces( interfaces ) -- retrieve IP address information from IP-MIB status, ips = snmpHelper:walk( ip_oid ) -- associate that IP address information with the correct interface if (not(status)) or ( ips ~= nil ) and ( #ips ~= 0 ) then interfaces = process_ips( interfaces, ips ) end local output = stdnse.format_output( true, build_results(interfaces) ) if SCRIPT_TYPE == "prerule" and target.ALLOW_NEW_TARGETS then local sum = 0 ips = list_addrs(interfaces) -- Could add all of the addresses at once, but count -- successful additions instead for script output for _, i in ipairs(ips) do local st, err = target.add(i) if st then sum = sum + 1 else stdnse.debug1("Couldn't add target " .. i .. ": " .. err) end end if sum ~= 0 then output = output .. "\nSuccessfully added " .. tostring(sum) .. " new targets" end elseif SCRIPT_TYPE == "portrule" then nmap.set_port_state(host, port, "open") end return output end