local mssql = require "mssql" local nmap = require "nmap" local smb = require "smb" local stdnse = require "stdnse" -- -*- mode: lua -*- -- vim: set filetype=lua : description = [[ Attempts to determine configuration and version information for Microsoft SQL Server instances. SQL Server credentials required: No (will not benefit from mssql.username & mssql.password). Run criteria: * Host script: Will always run. * Port script: N/A NOTE: Unlike previous versions, this script will NOT attempt to log in to SQL Server instances. Blank passwords can be checked using the ms-sql-empty-password script. E.g.: nmap -sn --script ms-sql-empty-password --script-args mssql.instance-all The script uses two means of getting version information for SQL Server instances: * Querying the SQL Server Browser service, which runs by default on UDP port 1434 on servers that have SQL Server 2000 or later installed. However, this service may be disabled without affecting the functionality of the instances. Additionally, it provides imprecise version information. * Sending a probe to the instance, causing the instance to respond with information including the exact version number. This is the same method that Nmap uses for service versioning; however, this script can also do the same for instances accessible via Windows named pipes, and can target all of the instances listed by the SQL Server Browser service. In the event that the script can connect to the SQL Server Browser service (UDP 1434) but is unable to connect directly to the instance to obtain more accurate version information (because ports are blocked or the mssql.scanned-ports-only argument has been used), the script will rely only upon the version number provided by the SQL Server Browser/Monitor, which has the following limitations: * For SQL Server 2000 and SQL Server 7.0 instances, the RTM version number is always given, regardless of any service packs or patches installed. * For SQL Server 2005 and later, the version number will reflect the service pack installed, but the script will not be able to tell whether patches have been installed. Where possible, the script will determine major version numbers, service pack levels and whether patches have been installed. However, in cases where particular determinations can not be made, the script will report only what can be confirmed. NOTE: Communication with instances via named pipes depends on the smb library. To communicate with (and possibly to discover) instances via named pipes, the host must have at least one SMB port (e.g. TCP 445) that was scanned and found to be open. Additionally, named pipe connections may require Windows authentication to connect to the Windows host (via SMB) in addition to the authentication required to connect to the SQL Server instances itself. See the documentation and arguments for the smb library for more information. NOTE: By default, the ms-sql-* scripts may attempt to connect to and communicate with ports that were not included in the port list for the Nmap scan. This can be disabled using the mssql.scanned-ports-only script argument. ]] --- -- @usage -- nmap -p 445 --script ms-sql-info -- nmap -p 1433 --script ms-sql-info --script-args mssql.instance-port=1433 -- -- @output -- | ms-sql-info: -- | Windows server name: WINXP -- | 192.168.100.128\PROD: -- | Instance name: PROD -- | Version: -- | name: Microsoft SQL Server 2000 SP3 -- | number: 8.00.760 -- | Product: Microsoft SQL Server 2000 -- | Service pack level: SP3 -- | Post-SP patches applied: No -- | TCP port: 1278 -- | Named pipe: \\192.168.100.128\pipe\MSSQL$PROD\sql\query -- | Clustered: No -- | 192.168.100.128\SQLFIREWALLED: -- | Instance name: SQLFIREWALLED -- | Version: -- | name: Microsoft SQL Server 2008 RTM -- | Product: Microsoft SQL Server 2008 -- | Service pack level: RTM -- | TCP port: 4343 -- | Clustered: No -- | \\192.168.100.128\pipe\sql\query: -- | Version: -- | name: Microsoft SQL Server 2005 SP3+ -- | number: 9.00.4053 -- | Product: Microsoft SQL Server 2005 -- | Service pack level: SP3 -- | Post-SP patches applied: Yes -- |_ Named pipe: \\192.168.100.128\pipe\sql\query -- -- @xmloutput -- WINXP -- -- PROD --
-- Microsoft SQL Server 2000 SP3 -- 8.00.760 -- Microsoft SQL Server 2000 -- SP3 -- No --
-- 1278 -- \\192.168.100.128\pipe\MSSQL$PROD\sql\query -- No -- -- -- SQLFIREWALLED --
-- Microsoft SQL Server 2008 RTM -- Microsoft SQL Server 2008 -- RTM --
-- 4343 -- No -- -- --
-- Microsoft SQL Server 2005 SP3+ -- 9.00.4053 -- Microsoft SQL Server 2005 -- SP3 -- Yes --
-- \\192.168.100.128\pipe\sql\query -- -- rev 1.0 (2007-06-09) -- rev 1.1 (2009-12-06 - Added SQL 2008 identification T Sellers) -- rev 1.2 (2010-10-03 - Added Broadcast support ) -- rev 1.3 (2010-10-10 - Added prerule and newtargets support ) -- rev 1.4 (2011-01-24 - Revised logic in order to get version data without logging in; -- added functionality to interpret version in terms of SP level, etc. -- added script arg to prevent script from connecting to ports that -- weren't in original Nmap scan ) -- rev 1.5 (2011-02-01 - Moved discovery functionality into ms-sql-discover.nse and -- broadcast-ms-sql-discovery.nse ) -- rev 1.6 (2014-09-04 - Added structured output Daniel Miller) author = "Chris Woodbury, Thomas Buchanan" license = "Same as Nmap--See https://nmap.org/book/man-legal.html" categories = {"default", "discovery", "safe"} hostrule = function(host) if ( mssql.Helper.WasDiscoveryPerformed( host ) ) then return mssql.Helper.GetDiscoveredInstances( host ) ~= nil else local sqlDefaultPort = nmap.get_port_state( host, {number = 1433, protocol = "tcp"} ) local sqlBrowserPort = nmap.get_port_state( host, {number = 1434, protocol = "udp"} ) -- smb.get_port() will return nil if no SMB port was scanned OR if SMB ports were scanned but none was open local smbPortNumber = smb.get_port( host ) if ( (stdnse.get_script_args( {"mssql.instance-all", "mssql.instance-name", "mssql.instance-port"} ) ~= nil) or (sqlBrowserPort and (sqlBrowserPort.state == "open" or sqlBrowserPort.state == "open|filtered")) or (sqlDefaultPort and (sqlDefaultPort.state == "open" or sqlDefaultPort.state == "open|filtered")) or (smbPortNumber ~= nil) ) then return true end end end --- Returns formatted output for the given version data local function create_version_output_table( versionInfo ) local versionOutput = {} versionOutput["name"] = versionInfo:ToString() if ( versionInfo.source ~= "SSRP" ) then versionOutput["number"] = versionInfo.versionNumber end versionOutput["Product"] = versionInfo.productName versionOutput["Service pack level"] = versionInfo.servicePackLevel versionOutput["Post-SP patches applied"] = versionInfo.patched return versionOutput end --- Returns formatted output for the given instance local function create_instance_output_table( instance ) -- if we didn't get anything useful (due to errors or the port not actually -- being SQL Server), don't report anything if not ( instance.instanceName or instance.version ) then return nil end local instanceOutput = stdnse.output_table() instanceOutput["Instance name"] = instance.instanceName if instance.version then instanceOutput["Version"] = create_version_output_table( instance.version ) end if instance.port then instanceOutput["TCP port"] = instance.port.number end instanceOutput["Named pipe"] = instance.pipeName instanceOutput["Clustered"] = instance.isClustered return instanceOutput end --- Processes a single instance, attempting to determine its version, etc. local function process_instance( instance ) local foundVersion = false local ssnetlibVersion -- If possible and allowed (see 'mssql.scanned-ports-only' argument), we'll -- connect to the instance to get an accurate version number if ( instance:HasNetworkProtocols() ) then local ssnetlibVersion foundVersion, ssnetlibVersion = mssql.Helper.GetInstanceVersion( instance ) if ( foundVersion ) then instance.version = ssnetlibVersion stdnse.debug1("Retrieved SSNetLib version for %s.", instance:GetName() ) else stdnse.debug1("Could not retrieve SSNetLib version for %s.", instance:GetName() ) end end -- If we didn't get a version from SSNetLib, give the user some detail as to why if ( not foundVersion ) then if ( not instance:HasNetworkProtocols() ) then stdnse.debug1("%s has no network protocols enabled.", instance:GetName() ) end if ( instance.version ) then stdnse.debug1("Using version number from SSRP response for %s.", instance:GetName() ) else stdnse.debug1("Version info could not be retrieved for %s.", instance:GetName() ) end end -- Give some version info back to Nmap if ( instance.port and instance.version ) then instance.version:PopulateNmapPortVersion( instance.port ) nmap.set_port_version( instance.host, instance.port) end end action = function( host ) local scriptOutput = stdnse.output_table() local status, instanceList = mssql.Helper.GetTargetInstances( host ) -- if no instances were targeted, then display info on all if ( not status ) then if ( not mssql.Helper.WasDiscoveryPerformed( host ) ) then mssql.Helper.Discover( host ) end instanceList = mssql.Helper.GetDiscoveredInstances( host ) end if ( not instanceList ) then return stdnse.format_output( false, instanceList or "" ) else for _, instance in ipairs( instanceList ) do if instance.serverName then scriptOutput["Windows server name"] = instance.serverName break end end for _, instance in pairs( instanceList ) do process_instance( instance ) scriptOutput[instance:GetName()] = create_instance_output_table( instance ) end end return scriptOutput end