/*************************************************************************** * Target.h -- The Target class encapsulates much of the information Nmap * * has about a host. Results (such as ping, OS scan, etc) are stored in * * this class as they are determined. * * * ***********************IMPORTANT NMAP LICENSE TERMS************************ * * * The Nmap Security Scanner is (C) 1996-2015 Insecure.Com LLC. Nmap is * * also a registered trademark of Insecure.Com LLC. This program is free * * software; you may redistribute and/or modify it under the terms of the * * GNU General Public License as published by the Free Software * * Foundation; Version 2 ("GPL"), BUT ONLY WITH ALL OF THE CLARIFICATIONS * * AND EXCEPTIONS DESCRIBED HEREIN. This guarantees your right to use, * * modify, and redistribute this software under certain conditions. If * * you wish to embed Nmap technology into proprietary software, we sell * * alternative licenses (contact sales@nmap.com). Dozens of software * * vendors already license Nmap technology such as host discovery, port * * scanning, OS detection, version detection, and the Nmap Scripting * * Engine. * * * * Note that the GPL places important restrictions on "derivative works", * * yet it does not provide a detailed definition of that term. To avoid * * misunderstandings, we interpret that term as broadly as copyright law * * allows. For example, we consider an application to constitute a * * derivative work for the purpose of this license if it does any of the * * following with any software or content covered by this license * * ("Covered Software"): * * * * o Integrates source code from Covered Software. * * * * o Reads or includes copyrighted data files, such as Nmap's nmap-os-db * * or nmap-service-probes. * * * * o Is designed specifically to execute Covered Software and parse the * * results (as opposed to typical shell or execution-menu apps, which will * * execute anything you tell them to). * * * * o Includes Covered Software in a proprietary executable installer. The * * installers produced by InstallShield are an example of this. Including * * Nmap with other software in compressed or archival form does not * * trigger this provision, provided appropriate open source decompression * * or de-archiving software is widely available for no charge. For the * * purposes of this license, an installer is considered to include Covered * * Software even if it actually retrieves a copy of Covered Software from * * another source during runtime (such as by downloading it from the * * Internet). * * * * o Links (statically or dynamically) to a library which does any of the * * above. * * * * o Executes a helper program, module, or script to do any of the above. * * * * This list is not exclusive, but is meant to clarify our interpretation * * of derived works with some common examples. Other people may interpret * * the plain GPL differently, so we consider this a special exception to * * the GPL that we apply to Covered Software. Works which meet any of * * these conditions must conform to all of the terms of this license, * * particularly including the GPL Section 3 requirements of providing * * source code and allowing free redistribution of the work as a whole. * * * * As another special exception to the GPL terms, Insecure.Com LLC grants * * permission to link the code of this program with any version of the * * OpenSSL library which is distributed under a license identical to that * * listed in the included docs/licenses/OpenSSL.txt file, and distribute * * linked combinations including the two. * * * * Any redistribution of Covered Software, including any derived works, * * must obey and carry forward all of the terms of this license, including * * obeying all GPL rules and restrictions. For example, source code of * * the whole work must be provided and free redistribution must be * * allowed. All GPL references to "this License", are to be treated as * * including the terms and conditions of this license text as well. * * * * Because this license imposes special exceptions to the GPL, Covered * * Work may not be combined (even as part of a larger work) with plain GPL * * software. The terms, conditions, and exceptions of this license must * * be included as well. This license is incompatible with some other open * * source licenses as well. In some cases we can relicense portions of * * Nmap or grant special permissions to use it in other open source * * software. Please contact fyodor@nmap.org with any such requests. * * Similarly, we don't incorporate incompatible open source software into * * Covered Software without special permission from the copyright holders. * * * * If you have any questions about the licensing restrictions on using * * Nmap in other works, are happy to help. As mentioned above, we also * * offer alternative license to integrate Nmap into proprietary * * applications and appliances. These contracts have been sold to dozens * * of software vendors, and generally include a perpetual license as well * * as providing for priority support and updates. They also fund the * * continued development of Nmap. Please email sales@nmap.com for further * * information. * * * * If you have received a written license agreement or contract for * * Covered Software stating terms other than these, you may choose to use * * and redistribute Covered Software under those terms instead of these. * * * * Source is provided to this software because we believe users have a * * right to know exactly what a program is going to do before they run it. * * This also allows you to audit the software for security holes. * * * * Source code also allows you to port Nmap to new platforms, fix bugs, * * and add new features. You are highly encouraged to send your changes * * to the dev@nmap.org mailing list for possible incorporation into the * * main distribution. By sending these changes to Fyodor or one of the * * Insecure.Org development mailing lists, or checking them into the Nmap * * source code repository, it is understood (unless you specify otherwise) * * that you are offering the Nmap Project (Insecure.Com LLC) the * * unlimited, non-exclusive right to reuse, modify, and relicense the * * code. Nmap will always be available Open Source, but this is important * * because the inability to relicense code has caused devastating problems * * for other Free Software projects (such as KDE and NASM). We also * * occasionally relicense the code to third parties as discussed above. * * If you wish to specify special license conditions of your * * contributions, just say so when you send them. * * * * This program is distributed in the hope that it will be useful, but * * WITHOUT ANY WARRANTY; without even the implied warranty of * * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the Nmap * * license file for more details (it's in a COPYING file included with * * Nmap, and also available from https://svn.nmap.org/nmap/COPYING) * * * ***************************************************************************/ /* $Id$ */ #ifndef TARGET_H #define TARGET_H #include "nmap.h" #include "FingerPrintResults.h" #include "libnetutil/netutil.h" #ifndef NOLUA #include "nse_main.h" #endif #include "portreasons.h" #include "portlist.h" #include "tcpip.h" #include "scan_engine.h" #include #include #ifndef INET6_ADDRSTRLEN #define INET6_ADDRSTRLEN 46 #endif enum osscan_flags { OS_NOTPERF=0, OS_PERF, OS_PERF_UNREL }; struct host_timeout_nfo { unsigned long msecs_used; /* How many msecs has this Target used? */ bool toclock_running; /* Is the clock running right now? */ struct timeval toclock_start; /* When did the clock start? */ time_t host_start, host_end; /* The absolute start and end for this host */ }; struct TracerouteHop { struct sockaddr_storage tag; bool timedout; std::string name; struct sockaddr_storage addr; int ttl; float rtt; /* In milliseconds. */ int display_name(char *buf, size_t len) { if (name.empty()) return Snprintf(buf, len, "%s", inet_ntop_ez(&addr, sizeof(addr))); else return Snprintf(buf, len, "%s (%s)", name.c_str(), inet_ntop_ez(&addr, sizeof(addr))); } }; class Target { public: /* For now ... TODO: a lot of the data members should be made private */ Target(); ~Target(); /* Recycles the object by freeing internal objects and reinitializing to default state */ void Recycle(); /* Returns the address family of the destination address. */ int af() const; /* Fills a sockaddr_storage with the AF_INET or AF_INET6 address information of the target. This is a preferred way to get the address since it is portable for IPv6 hosts. Returns 0 for success. ss_len must be provided. It is not examined, but is set to the size of the sockaddr copied in. */ int TargetSockAddr(struct sockaddr_storage *ss, size_t *ss_len) const; const struct sockaddr_storage *TargetSockAddr() const; /* Note that it is OK to pass in a sockaddr_in or sockaddr_in6 casted to sockaddr_storage */ void setTargetSockAddr(const struct sockaddr_storage *ss, size_t ss_len); // Returns IPv4 target host address or {0} if unavailable. struct in_addr v4host() const; const struct in_addr *v4hostip() const; const struct in6_addr *v6hostip() const; /* The source address used to reach the target */ int SourceSockAddr(struct sockaddr_storage *ss, size_t *ss_len) const; const struct sockaddr_storage *SourceSockAddr() const; /* Note that it is OK to pass in a sockaddr_in or sockaddr_in6 casted to sockaddr_storage */ void setSourceSockAddr(const struct sockaddr_storage *ss, size_t ss_len); struct in_addr v4source() const; const struct in_addr *v4sourceip() const; const struct in6_addr *v6sourceip() const; /* The IPv4 or IPv6 literal string for the target host */ const char *targetipstr() const { return targetipstring; } /* The IPv4 or IPv6 literal string for the source address */ const char *sourceipstr() const { return sourceipstring; } /* Give the name from the last setHostName() call, which should be the name obtained from reverse-resolution (PTR query) of the IP (v4 or v6). If the name has not been set, or was set to NULL, an empty string ("") is returned to make printing easier. */ const char *HostName() const { return hostname? hostname : ""; } /* You can set to NULL to erase a name or if it failed to resolve -- or just don't call this if it fails to resolve. The hostname is blown away when you setTargetSockAddr(), so make sure you do these in proper order */ void setHostName(const char *name); /* Generates a printable string consisting of the host's IP address and hostname (if available). Eg "www.insecure.org (64.71.184.53)" or "fe80::202:e3ff:fe14:1102". The name is written into the buffer provided, which is also returned. Results that do not fit in buflen will be truncated. */ const char *NameIP(char *buf, size_t buflen) const; /* This next version returns a STATIC buffer -- so no concurrency */ const char *NameIP() const; /* Give the name from the last setTargetName() call, which is the name of the target given on the command line if it's a named host. */ const char *TargetName() { return targetname; } /* You can set to NULL to erase a name. The targetname is blown away when you setTargetSockAddr(), so make sure you do these in proper order */ void setTargetName(const char *name); /* If the host is directly connected on a network, set and retrieve that information here. directlyConnected() will abort if it hasn't been set yet. */ void setDirectlyConnected(bool connected); bool directlyConnected() const; int directlyConnectedOrUnset() const; /* 1-directly connected, 0-no, -1-we don't know*/ /* If the host is NOT directly connected, you can set the next hop value here. It is OK to pass in a sockaddr_in or sockaddr_in6 casted to sockaddr_storage*/ void setNextHop(struct sockaddr_storage *next_hop, size_t next_hop_len); /* Returns the next hop for sending packets to this host. Returns true if next_hop was filled in. It might be false, for example, if next_hop has never been set */ bool nextHop(struct sockaddr_storage *next_hop, size_t *next_hop_len); void setMTU(int devmtu); int MTU(void); /* Sets the interface type to one of: devt_ethernet, devt_loopback, devt_p2p, devt_other */ void setIfType(devtype iftype) { interface_type = iftype; } /* Returns -1 if it has not yet been set with setIfType() */ devtype ifType() { return interface_type; } /* Starts the timeout clock for the host running (e.g. you are beginning a scan). If you do not have the current time handy, you can pass in NULL. When done, call stopTimeOutClock (it will also automatically be stopped of timedOut() returns true) */ void startTimeOutClock(const struct timeval *now); /* The complement to startTimeOutClock. */ void stopTimeOutClock(const struct timeval *now); /* Is the timeout clock currently running? */ bool timeOutClockRunning() { return htn.toclock_running; } /* Returns whether the host is timedout. If the timeoutclock is running, counts elapsed time for that. Pass NULL if you don't have the current time handy. You might as well also pass NULL if the clock is not running, as the func won't need the time. */ bool timedOut(const struct timeval *now); /* Return time_t for the start and end time of this host */ time_t StartTime() { return htn.host_start; } time_t EndTime() { return htn.host_end; } /* Takes a 6-byte MAC address */ int setMACAddress(const u8 *addy); int setSrcMACAddress(const u8 *addy); int setNextHopMACAddress(const u8 *addy); // this should be the target's own MAC if directlyConnected() /* Returns a pointer to 6-byte MAC address, or NULL if none is set */ const u8 *MACAddress() const; const u8 *SrcMACAddress() const; const u8 *NextHopMACAddress() const; /* Set the device names so that they can be returned by deviceName() and deviceFullName(). The normal name may not include alias qualifier, while the full name may include it (e.g. "eth1:1"). If these are non-null, they will overwrite the stored version */ void setDeviceNames(const char *name, const char *fullname); const char *deviceName() const; const char *deviceFullName() const; int osscanPerformed(void); void osscanSetFlag(int flag); struct seq_info seq; int distance; enum dist_calc_method distance_calculation_method; FingerPrintResults *FPR; /* FP results get by the OS scan system. */ PortList ports; int weird_responses; /* echo responses from other addresses, Ie a network broadcast address */ unsigned int flags; /* HOST_UNKNOWN, HOST_UP, or HOST_DOWN. */ struct timeout_info to; char *hostname; // Null if unable to resolve or unset char * targetname; // The name of the target host given on the command line if it is a named host struct probespec traceroute_probespec; std::list traceroute_hops; /* If the address for this target came from a DNS lookup, the list of resultant addresses (sometimes there are more than one). The address actually used is always the first element in this list. */ std::list resolved_addrs; #ifndef NOLUA ScriptResults scriptResults; #endif state_reason_t reason; /* A probe that is known to receive a response. This is used to hold the current timing ping probe type during scanning. */ probespec pingprobe; /* The state the port or protocol entered when the response to pingprobe was received. */ int pingprobe_state; private: void Initialize(); void FreeInternal(); // Free memory allocated inside this object // Creates a "presentation" formatted string out of the target's IPv4/IPv6 address void GenerateTargetIPString(); // Creates a "presentation" formatted string out of the source IPv4/IPv6 address. void GenerateSourceIPString(); struct sockaddr_storage targetsock, sourcesock, nexthopsock; size_t targetsocklen, sourcesocklen, nexthopsocklen; int directly_connected; // -1 = unset; 0 = no; 1 = yes char targetipstring[INET6_ADDRSTRLEN]; char sourceipstring[INET6_ADDRSTRLEN]; mutable char *nameIPBuf; /* for the NameIP(void) function to return */ u8 MACaddress[6], SrcMACaddress[6], NextHopMACaddress[6]; bool MACaddress_set, SrcMACaddress_set, NextHopMACaddress_set; struct host_timeout_nfo htn; devtype interface_type; char devname[32]; char devfullname[32]; int mtu; /* 0 (OS_NOTPERF) if os detection not performed * 1 (OS_PERF) if os detection performed * 2 (OS_PERF_UNREL) if an unreliable os detection has been performed */ int osscan_flag; }; #endif /* TARGET_H */