--- -- By making heavy use of the smb library, this library will call various MSRPC -- functions. The functions used here can be accessed over TCP ports 445 and 139, -- with an established session. A NULL session (the default) will work for some -- functions and operating systems (or configurations), but not for others. -- -- To make use of these function calls, a SMB session with the server has to be -- established. This can be done manually with the smb library, or the function -- start_smb can be called. A session has to be created, then the IPC$ -- tree opened. -- -- Next, the interface has to be bound. The bind() function will take care of that. -- -- After that, you're free to call any function that's part of that interface. In -- other words, if you bind to the SAMR interface, you can only call the samr_ -- functions, for lsa_ functions, bind to the LSA interface, etc. Although functions -- can technically be called in any order, many functions depend on the -- value returned by other functions. I indicate those in the function comments, -- so keep an eye out. SAMR functions, for example, require a call to -- connect4. -- -- Something to note is that these functions, for the most part, return a whole ton -- of stuff in a table; basically, everything that is returned by the function. -- Generally, if you want to know exactly what you have access to, either display the -- returned data with a print_table-type function, or check the documentation (Samba 4.0's -- .idl files (in samba_4.0/source/librpc/idl; see below for link) are what I based -- the names on). -- -- The parameters for each function are converted to a string of bytes in a process -- called "marshalling". Functions here take arguments that match what a user would -- logically want to send. These are marshalled by using functions in the -- msrpctypes module. Those functions require a table of values that -- isn't very use friendly; as such, it's generated, when possible, in the functions -- in this module. The value returned, on the other hand, is returned directly to the -- user; I don't want to limit what data they can use, and it's difficult to rely on -- servers to format it consistently (sometimes a null is returned, and -- other times an empty array or blank string), so I put the onus on the scripts to -- deal with the returned values. -- -- When implementing this, I used Wireshark's output significantly, as well as Samba's -- .idl files for reference: -- http://websvn.samba.org/cgi-bin/viewcvs.cgi/branches/SAMBA_4_0/source/librpc/idl/. -- I'm not a lawyer, but I don't expect that this is a breach of Samba's copyright -- -- if it is, please talk to me and I'll make arrangements to re-license this or to -- remove references to Samba. -- -- Revised 07/25/2012 - added Printer Spooler Service (spoolss) RPC functions and -- constants [Aleksandar Nikolic] --@author Ron Bowes --@copyright Same as Nmap--See http://nmap.org/book/man-legal.html ----------------------------------------------------------------------- local bin = require "bin" local bit = require "bit" local math = require "math" local msrpctypes = require "msrpctypes" local netbios = require "netbios" local os = require "os" local smb = require "smb" local stdnse = require "stdnse" local string = require "string" local table = require "table" _ENV = stdnse.module("msrpc", stdnse.seeall) -- The path, UUID, and version for SAMR SAMR_PATH = "\\samr" SAMR_UUID = string.char(0x78, 0x57, 0x34, 0x12, 0x34, 0x12, 0xcd, 0xab, 0xef, 0x00, 0x01, 0x23, 0x45, 0x67, 0x89, 0xac) SAMR_VERSION = 0x01 -- The path, UUID, and version for SRVSVC SRVSVC_PATH = "\\srvsvc" SRVSVC_UUID = string.char(0xc8, 0x4f, 0x32, 0x4b, 0x70, 0x16, 0xd3, 0x01, 0x12, 0x78, 0x5a, 0x47, 0xbf, 0x6e, 0xe1, 0x88) SRVSVC_VERSION = 0x03 -- The path, UUID, and version for SPOOLSS SPOOLSS_PATH = "\\spoolss" SPOOLSS_UUID = string.char(0x78, 0x56, 0x34, 0x12, 0x34, 0x12, 0xcd, 0xab, 0xef, 0x00, 0x01, 0x23, 0x45, 0x67, 0x89, 0xab) SPOOLSS_VERSION = 0x01 -- The path, UUID, and version for LSA LSA_PATH = "\\lsarpc" LSA_UUID = string.char(0x78, 0x57, 0x34, 0x12, 0x34, 0x12, 0xcd, 0xab, 0xef, 0x00, 0x01, 0x23, 0x45, 0x67, 0x89, 0xab) LSA_VERSION = 0 -- The path, UUID, and version for WINREG WINREG_PATH = "\\winreg" WINREG_UUID = string.char(0x01, 0xd0, 0x8c, 0x33, 0x44, 0x22, 0xf1, 0x31, 0xaa, 0xaa, 0x90, 0x00, 0x38, 0x00, 0x10, 0x03) WINREG_VERSION = 1 -- The path, UUID, and version for SVCCTL SVCCTL_PATH = "\\svcctl" SVCCTL_UUID = string.char(0x81, 0xbb, 0x7a, 0x36, 0x44, 0x98, 0xf1, 0x35, 0xad, 0x32, 0x98, 0xf0, 0x38, 0x00, 0x10, 0x03) SVCCTL_VERSION = 2 -- The path, UUID, and version for ATSVC ATSVC_PATH = "\\atsvc" ATSVC_UUID = string.char(0x82, 0x06, 0xf7, 0x1f, 0x51, 0x0a, 0xe8, 0x30, 0x07, 0x6d, 0x74, 0x0b, 0xe8, 0xce, 0xe9, 0x8b) ATSVC_VERSION = 1 -- UUID and version for epmapper e1af8308-5d1f-11c9-91a4-08002b14a0fa v3.0 EPMAPPER_PATH = "\\epmapper" EPMAPPER_UUID = string.char(0x08, 0x83, 0xaf, 0xe1, 0x1f, 0x5d, 0xc9, 0x11, 0x91, 0xa4, 0x08, 0x00, 0x2b, 0x14, 0xa0, 0xfa) EPMAPPER_VERSION = 3 -- This is the only transfer syntax I've seen in the wild, not that I've looked hard. It seems to work well. TRANSFER_SYNTAX = string.char(0x04, 0x5d, 0x88, 0x8a, 0xeb, 0x1c, 0xc9, 0x11, 0x9f, 0xe8, 0x08, 0x00, 0x2b, 0x10, 0x48, 0x60) -- The 'referent_id' value is ignored, as far as I can tell, so this value is passed for it. No, it isn't random. :) REFERENT_ID = 0x50414d4e -- The maximum length of a packet fragment MAX_FRAGMENT = 0x800 ---The number of SAMR records to pull at once. This was originally 1, but since I've written -- proper fragmentation code, I've successfully done it with 110 users, although I'd be surprised -- if you couldn't go a lot higher. I had some issues that I suspect was UNIX truncating packets, -- so I scaled it back. local SAMR_GROUPSIZE = 20 ---The number of LSA RIDs to check at once. I've successfully tested with up to about 110. Note that -- due to very long message sizes, Wireshark might truncate packets if you have more than 30 together, -- so for debugging, setting this to 30 might be a plan. Like SAMR, I scaled this back due to UNIX -- truncation. local LSA_GROUPSIZE = 20 ---The number of consecutive empty groups to stop after. Basically, this means that after -- LSA_MINEMPTY groups of LSA_GROUPSIZE users come back empty, we give -- up. Raising this could find more users, but at the expense of more packets. local LSA_MINEMPTY = 10 ---Mapping between well known MSRPC UUIDs and corresponding exe/service local UUID2EXE = { ["1ff70682-0a51-30e8-076d-740be8cee98b"] = "mstask.exe atsvc interface (Scheduler service)", ["3faf4738-3a21-4307-b46c-fdda9bb8c0d5"] = "AudioSrv AudioSrv interface (Windows Audio service)", ["6bffd098-a112-3610-9833-012892020162"] = "Browser browser interface (Computer Browser service)", ["91ae6020-9e3c-11cf-8d7c-00aa00c091be"] = "certsrv.exe ICertPassage interface (Certificate services)", ["5ca4a760-ebb1-11cf-8611-00a0245420ed"] = "termsrv.exe winstation_rpc interface", ["c8cb7687-e6d3-11d2-a958-00c04f682e16"] = "WebClient davclntrpc interface (WebDAV client service)", ["50abc2a4-574d-40b3-9d66-ee4fd5fba076"] = "dns.exe DnsServer interface (DNS Server service)", ["e1af8308-5d1f-11c9-91a4-08002b14a0fa"] = "RpcSs epmp interface (RPC endpoint mapper)", ["82273fdc-e32a-18c3-3f78-827929dc23ea"] = "Eventlog eventlog interface (Eventlog service)", ["3d267954-eeb7-11d1-b94e-00c04fa3080d"] = "lserver.exe Terminal Server Licensing", ["894de0c0-0d55-11d3-a322-00c04fa321a1"] = "winlogon.exe InitShutdown interface", ["8d0ffe72-d252-11d0-bf8f-00c04fd9126b"] = "CryptSvc IKeySvc interface (Cryptographic services)", ["0d72a7d4-6148-11d1-b4aa-00c04fb66ea0"] = "CryptSvc ICertProtect interface (Cryptographic services)", ["d6d70ef0-0e3b-11cb-acc3-08002b1d29c4"] = "locator.exe NsiS interface (RPC Locator service)", ["342cfd40-3c6c-11ce-a893-08002b2e9c6d"] = "llssrv.exe llsrpc interface (Licensing Logging service)", ["12345778-1234-abcd-ef00-0123456789ab"] = "lsass.exe lsarpc interface", ["3919286a-b10c-11d0-9ba8-00c04fd92ef5"] = "lsass.exe dssetup interface", ["5a7b91f8-ff00-11d0-a9b2-00c04fb6e6fc"] = "messenger msgsvcsend interface (Messenger service)", ["2f5f3220-c126-1076-b549-074d078619da"] = "netdde.exe nddeapi interface (NetDDE service)", ["4fc742e0-4a10-11cf-8273-00aa004ae673"] = "Dfssvc netdfs interface (Distributed File System service)", ["12345678-1234-abcd-ef00-01234567cffb"] = "Netlogon netlogon interface (Net Logon service)", ["8d9f4e40-a03d-11ce-8f69-08003e30051b"] = "PlugPlay pnp interface (Plug and Play service)", -- ["8d9f4e40-a03d-11ce-8f69-08003e30051b"] = "PlugPlay pnp interface (Plug and Play Windows Vista service)", ["d335b8f6-cb31-11d0-b0f9-006097ba4e54"] = "PolicyAgent PolicyAgent interface (IPSEC Policy Agent (Windows 2000))", -- ["12345678-1234-abcd-ef00-0123456789ab"] = "PolicyAgent winipsec interface (IPsec Services)", ["369ce4f0-0fdc-11d3-bde8-00c04f8eee78"] = "winlogon.exe pmapapi interface", ["c9378ff1-16f7-11d0-a0b2-00aa0061426a"] = "lsass.exe IPStoreProv interface (Protected Storage)", ["8f09f000-b7ed-11ce-bbd2-00001a181cad"] = "mprdim.dll Remote Access", ["12345778-1234-abcd-ef00-0123456789ac"] = "lsass.exe samr interface", ["93149ca2-973b-11d1-8c39-00c04fb984f9"] = "services.exe SceSvc", ["12b81e99-f207-4a4c-85d3-77b42f76fd14"] = "seclogon ISeclogon interface (Secondary logon service)", ["83da7c00-e84f-11d2-9807-00c04f8ec850"] = "winlogon.exe sfcapi interface (Windows File Protection)", -- ["12345678-1234-abcd-ef00-0123456789ab"] = "spoolsv.exe spoolss interface (Spooler service)", ["4b324fc8-1670-01d3-1278-5a47bf6ee188"] = "services.exe (w2k) or svchost.exe (wxp and w2k3) srvsvc interface (Server service)", ["4b112204-0e19-11d3-b42b-0000f81feb9f"] = "ssdpsrv ssdpsrv interface (SSDP service)", ["367aeb81-9844-35f1-ad32-98f038001003"] = "services.exe svcctl interface (Services control manager)", ["2f5f6520-ca46-1067-b319-00dd010662da"] = "Tapisrv tapsrv interface (Telephony service)", ["300f3532-38cc-11d0-a3f0-0020af6b0add"] = "Trkwks trkwks interface (Distributed Link Tracking Client)", ["8fb6d884-2388-11d0-8c35-00c04fda2795"] = "w32time w32time interface (Windows Time)", -- ["8fb6d884-2388-11d0-8c35-00c04fda2795"] = "w32time w32time interface (Windows Time (Windows Server 2003, Windows Vista))", ["a002b3a0-c9b7-11d1-ae88-0080c75e4ec1"] = "winlogon.exe GetUserToken interface", ["338cd001-2244-31f1-aaaa-900038001003"] = "RemoteRegistry winreg interface (Remote registry service)", ["45f52c28-7f9f-101a-b52b-08002b2efabe"] = "wins.exe winsif interface (WINS service)", ["6bffd098-a112-3610-9833-46c3f87e345a"] = "services.exe (w2k) or svchost.exe (wxp and w2k3) wkssvc interface (Workstation service)" } --- This is a wrapper around the SMB class, designed to get SMB going quickly for MSRPC calls. -- -- This will connect to the SMB server, negotiate the protocol, open a session, -- connect to the IPC$ share, and open the named pipe given by 'path'. When -- this successfully returns, the 'smbstate' table can be immediately used for -- MSRPC (the bind function should be called right after). -- -- Note that the smbstate table is the same one used in the SMB files -- (obviously), so it will contain the various results/information places in -- there by SMB functions. -- --@param host The host object. --@param path The path to the named pipe; for example, msrpc.SAMR_PATH or -- msrpc.SRVSVC_PATH. --@param disable_extended [optional] If set to 'true', disables extended -- security negotiations. --@param overrides [optional] Overrides variables in all the SMB functions. --@return status true or false --@return smbstate if status is true, or an error message. function start_smb(host, path, disable_extended, overrides) overrides = overrides or {} return smb.start_ex(host, true, true, "IPC$", path, disable_extended, overrides) end --- A wrapper around the smb.stop function. -- -- I only created it to add symmetry, so client code doesn't have to call both -- msrpc and smb functions. -- --@param state The SMB state table. function stop_smb(state) smb.stop(state) end --- Bind to a MSRPC interface. Two common interfaces are SAML and SRVSVC, and can be found as -- constants at the top of this file. Once this function has successfully returned, any MSRPC -- call can be made (provided it doesn't depend on results from other MSRPC calls). -- --@param smbstate The SMB state table --@param interface_uuid The interface to bind to. There are constants defined for these (SAMR_UUID, -- etc.) --@param interface_version The interface version to use. There are constants at the top (SAMR_VERSION, -- etc.) --@param transfer_syntax The transfer syntax to use. I don't really know what this is, but the value -- was always the same on my tests. You can use the constant at the top (TRANSFER_SYNTAX), or -- just set this parameter to 'nil'. --@return (status, result) If status is false, result is an error message. Otherwise, result is a -- table of values, none of which are especially useful. function bind(smbstate, interface_uuid, interface_version, transfer_syntax) local i local status, result local parameters, data local pos, align local result stdnse.print_debug(2, "MSRPC: Sending Bind() request") -- Use the only transfer_syntax value I know of. if(transfer_syntax == nil) then transfer_syntax = TRANSFER_SYNTAX end data = bin.pack("IISMB_COM_TRANSACTION packet, and parses the result. Once the SMB -- stuff has been stripped off the result, it's passed down here, cleaned up -- some more, and returned to the caller. -- -- There's a reason that SMB is sometimes considered to be between layer 4 and -- 7 on the OSI model. :) -- --@param smbstate The SMB state table (after bind has been called). --@param opnum The operating number (ie, the function). Find this in the -- MSRPC documentation or with a packet logger. --@param arguments The marshalled arguments to pass to the function. Currently, -- marshalling is all done manually. --@return status true or false --@return If status is false, result is an error message. Otherwise, result is -- a table of values, the most useful one being 'arguments', which are -- the values returned by the server. If the packet is fragmented, the -- fragments will be reassembled and 'arguments' will represent all the -- arguments; however, the rest of the result table will represent the -- most recent fragment. function call_function(smbstate, opnum, arguments) local i local status, result local parameters, data local pos, align local result local first = true local is_first, is_last data = bin.pack("IIbind has been called). -- @param domain (optional) string containing the domain name to query -- @param server_type number containing a server bit mask to use to filter responses -- @param detail_level number containing either 0 or 1 function rap_netserverenum2(smbstate, domain, server_type, detail_level) local NETSERVERENUM2 = 0x0068 local paramdesc = (domain and "WrLehDz" or "WrLehDO") assert( detail_level > 0 and detail_level < 2, "detail_level must be either 0 or 1") local datadesc = ( detail_level == 0 and "B16" or "B16BBDz") local data = bin.pack(" 0 ) then local comment_offset, _ server.version = {} pos, server.version.major, server.version.minor, server.type, comment_offset, _ = bin.unpack("msrpctypes function that converts a ShareType to -- an English string. -- -- I implemented this as a proxy so scripts don't have to make direct calls to -- msrpctypes functions. -- --@param val The value to convert. --@return A string that can be displayed to the user. function srvsvc_ShareType_tostr(val) return msrpctypes.srvsvc_ShareType_tostr(val) end ---Call the MSRPC function netshareenumall on the remote system. -- -- This function basically returns a list of all the shares on the system. -- --@param smbstate The SMB state table --@param server The IP or Hostname of the server (seems to be ignored but it's -- a good idea to have it) --@return status true or false --@return If status is false, result is an error message. Otherwise, result is -- a table of values, the most useful one being 'shares', which is a -- list of the system's shares. function srvsvc_netshareenumall(smbstate, server) local i, j local status, result local arguments local pos, align local level local ctr, referent, count, max_count stdnse.print_debug(2, "MSRPC: Calling NetShareEnumAll() [%s]", smbstate['ip']) -- [in] [string,charset(UTF16)] uint16 *server_unc arguments = msrpctypes.marshall_unicode_ptr("\\\\" .. server, true) -- [in,out] uint32 level arguments = arguments .. msrpctypes.marshall_int32(0) -- [in,out,switch_is(level)] srvsvc_NetShareCtr ctr arguments = arguments .. msrpctypes.marshall_srvsvc_NetShareCtr(0, {array=nil}) -- [in] uint32 max_buffer, arguments = arguments .. msrpctypes.marshall_int32(4096) -- [out] uint32 totalentries -- [in,out] uint32 *resume_handle* arguments = arguments .. msrpctypes.marshall_int32_ptr(0) -- Do the call status, result = call_function(smbstate, 0x0F, arguments) if(status ~= true) then return false, result end stdnse.print_debug(3, "MSRPC: NetShareEnumAll() returned successfully") -- Make arguments easier to use arguments = result['arguments'] pos = 1 -- [in] [string,charset(UTF16)] uint16 *server_unc -- [in,out] uint32 level pos, result['level'] = msrpctypes.unmarshall_int32(arguments, pos) -- [in,out,switch_is(level)] srvsvc_NetShareCtr ctr pos, result['ctr'] = msrpctypes.unmarshall_srvsvc_NetShareCtr(arguments, pos, level) if(pos == nil) then return false, "unmarshall_srvsvc_NetShareCtr() returned an error" end -- [out] uint32 totalentries pos, result['totalentries'] = msrpctypes.unmarshall_int32(arguments, pos) -- [in,out] uint32 *resume_handle pos, result['resume_handle'] = msrpctypes.unmarshall_int32_ptr(arguments, pos) -- The return value pos, result['return'] = msrpctypes.unmarshall_int32(arguments, pos) if(result['return'] == nil) then return false, "Read off the end of the packet (srvsvc.netshareenumall)" end if(result['return'] ~= 0) then return false, smb.get_status_name(result['return']) .. " (srvsvc.netshareenumall)" end return true, result end ---Call the MSRPC function netsharegetinfo on the remote system. This function retrieves extra information about a share -- on the system. -- --@param smbstate The SMB state table --@param server The IP or Hostname of the server (seems to be ignored but it's a good idea to have it) --@return (status, result) If status is false, result is an error message. Otherwise, result is a table of values, the most -- useful one being 'shares', which is a list of the system's shares. function srvsvc_netsharegetinfo(smbstate, server, share, level) local i, j local status, result local arguments local pos, align -- [in] [string,charset(UTF16)] uint16 *server_unc, arguments = msrpctypes.marshall_unicode_ptr("\\\\" .. server, true) -- [in] [string,charset(UTF16)] uint16 share_name[], arguments = arguments .. msrpctypes.marshall_unicode(share, true) -- [in] uint32 level, arguments = arguments .. msrpctypes.marshall_int32(level) -- [out,switch_is(level)] srvsvc_NetShareInfo info -- Do the call status, result = call_function(smbstate, 0x10, arguments) if(status ~= true) then return false, result end stdnse.print_debug(3, "MSRPC: NetShareGetInfo() returned successfully") -- Make arguments easier to use arguments = result['arguments'] pos = 1 -- [in] [string,charset(UTF16)] uint16 *server_unc, -- [in] [string,charset(UTF16)] uint16 share_name[], -- [in] uint32 level, -- [out,switch_is(level)] srvsvc_NetShareInfo info pos, result['info'] = msrpctypes.unmarshall_srvsvc_NetShareInfo(arguments, pos) if(pos == nil) then return false, "unmarshall_srvsvc_NetShareInfo() returned an error" end -- The return value pos, result['return'] = msrpctypes.unmarshall_int32(arguments, pos) if(result['return'] == nil) then return false, "Read off the end of the packet (srvsvc.netsharegetinfo)" end if(result['return'] ~= 0) then return false, smb.get_status_name(result['return']) .. " (srvsvc.netsharegetinfo)" end return true, result end ---Call the NetSessEnum function, which gets a list of active sessions on the host. For this function, -- a session is defined as a connection to a file share. -- --@param smbstate The SMB state table --@param server The IP or Hostname of the server (seems to be ignored but it's a good idea to have it) --@return (status, result) If status is false, result is an error message. Otherwise, result is an array of tables. -- Each table contains the elements 'user', 'client', 'active', and 'idle'. function srvsvc_netsessenum(smbstate, server) local i, j local status, result local arguments local pos, align stdnse.print_debug(2, "MSRPC: Calling NetSessEnum() [%s]", smbstate['ip']) -- [in] [string,charset(UTF16)] uint16 *server_unc, arguments = msrpctypes.marshall_unicode_ptr(server, true) -- [in] [string,charset(UTF16)] uint16 *client, arguments = arguments .. msrpctypes.marshall_unicode_ptr(nil) -- [in] [string,charset(UTF16)] uint16 *user, arguments = arguments .. msrpctypes.marshall_unicode_ptr(nil) -- [in,out] uint32 level, arguments = arguments .. msrpctypes.marshall_int32(10) -- 10 seems to be the only useful one allowed anonymously -- [in,out,switch_is(level)] srvsvc_NetSessCtr ctr, arguments = arguments .. msrpctypes.marshall_srvsvc_NetSessCtr(10, {array=nil}) -- [in] uint32 max_buffer, arguments = arguments .. msrpctypes.marshall_int32(0xFFFFFFFF) -- [out] uint32 totalentries, -- [in,out] uint32 *resume_handle arguments = arguments .. msrpctypes.marshall_int32_ptr(0) -- Do the call status, result = call_function(smbstate, 0x0C, arguments) if(status ~= true) then return false, result end stdnse.print_debug(3, "MSRPC: NetSessEnum() returned successfully") -- Make arguments easier to use arguments = result['arguments'] pos = 1 local count local sessions = {} local referent_id -- [in] [string,charset(UTF16)] uint16 *server_unc, -- [in] [string,charset(UTF16)] uint16 *client, -- [in] [string,charset(UTF16)] uint16 *user, -- [in,out] uint32 level, pos, result['level'] = msrpctypes.unmarshall_int32(arguments, pos) -- [in,out,switch_is(level)] srvsvc_NetSessCtr ctr, pos, result['ctr'] = msrpctypes.unmarshall_srvsvc_NetSessCtr(arguments, pos) if(pos == nil) then return false, "unmarshall_srvsvc_NetSessCtr() returned an error" end -- [in] uint32 max_buffer, -- [out] uint32 totalentries, pos, result['totalentries'] = msrpctypes.unmarshall_int32(arguments, pos) -- [in,out] uint32 *resume_handle pos, result['resume_handle'] = msrpctypes.unmarshall_int32_ptr(arguments, pos) pos, result['return'] = msrpctypes.unmarshall_int32(arguments, pos) if(result['return'] == nil) then return false, "Read off the end of the packet (srvsvc.netsessenum)" end if(result['return'] ~= 0) then return false, smb.get_status_name(result['return']) .. " (srvsvc.netsessenum)" end return true, result end --- Calls the NetServerGetStatistics function, which grabs a bunch of statistics on the server. -- This function requires administrator access to call. -- -- Note: Wireshark 1.0.3 doesn't parse this packet properly. -- --@param smbstate The SMB state table --@param server The IP or name of the server (I don't think this is actually used, but it's -- good practice to send it). -- --@return A table containing the following values: -- * 'start' The time when statistics collection started (or when the statistics were last cleared). The value is -- stored as the number of seconds that have elapsed since 00:00:00, January 1, 1970, GMT. To calculate -- the length of time that statistics have been collected, subtract the value of this member from the -- present time. 'start_date' is the date as a string. -- * 'fopens' The number of times a file is opened on a server. This includes the number of times named pipes are opened. -- * 'devopens' The number of times a server device is opened. -- * 'jobsqueued' The number of server print jobs spooled. -- * 'sopens' The number of times the server session started. -- * 'stimedout' The number of times the server session automatically disconnected. -- * 'serrorout' The number of times the server sessions failed with an error. -- * 'pwerrors' The number of server password violations. -- * 'permerrors' The number of server access permission errors. -- * 'syserrors' The number of server system errors. -- * 'bytessent' The number of server bytes sent to the network. -- * 'bytesrcvd' The number of server bytes received from the network. -- * 'avresult' The average server result time (in milliseconds). -- * 'reqbufneed' The number of times the server required a request buffer but failed to allocate one. This value indicates that the server parameters may need adjustment. -- * 'bigbufneed' The number of times the server required a big buffer but failed to allocate one. This value indicates that the server parameters may need adjustment. function srvsvc_netservergetstatistics(smbstate, server) local i, j local status, result local arguments local pos, align local service = "SERVICE_SERVER" stdnse.print_debug(2, "MSRPC: Calling NetServerGetStatistics() [%s]", smbstate['ip']) -- [in] [string,charset(UTF16)] uint16 *server_unc, arguments = msrpctypes.marshall_unicode_ptr(server, true) -- [in] [string,charset(UTF16)] uint16 *service, arguments = arguments .. msrpctypes.marshall_unicode_ptr(service, true) -- [in] uint32 level, arguments = arguments .. msrpctypes.marshall_int32(0) -- [in] uint32 options, arguments = arguments .. msrpctypes.marshall_int32(0) -- [out] srvsvc_Statistics stat -- Do the call status, result = call_function(smbstate, 0x18, arguments) if(status ~= true) then return false, result end stdnse.print_debug(3, "MSRPC: NetServerGetStatistics() returned successfully") -- Make arguments easier to use arguments = result['arguments'] pos = 1 -- [in] [string,charset(UTF16)] uint16 *server_unc, -- [in] [string,charset(UTF16)] uint16 *service, -- [in] uint32 level, -- [in] uint32 options, -- [out] srvsvc_Statistics stat pos, result['stat'] = msrpctypes.unmarshall_srvsvc_Statistics_ptr(arguments, pos) pos, result['return'] = msrpctypes.unmarshall_int32(arguments, pos) if(result['return'] == nil) then return false, "Read off the end of the packet (srvsvc.netservergetstatistics)" end if(result['return'] ~= 0) then return false, smb.get_status_name(result['return']) .. " (srvsvc.netservergetstatistics)" end return true, result end ---Call the NetPathCompare() function, which indirectly calls NetPathCanonicalize(), -- the target of ms08-067. I'm currently only using this to trigger ms08-067. -- -- The string used by Metasploit and other free tools to check for this vulnerability is -- '\AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA\..\n'. On vulnerable systems, this will be -- accepted and this function will return '0'. On patched systems, this will be rejected -- and return ERROR_INVALID_PARAMETER. -- -- Note that the srvsvc.exe process occasionally crashes when attempting this. -- --@param smbstate The SMB state table --@param server The IP or Hostname of the server (seems to be ignored but it's a good idea to have it) --@param path1 The first path to compare --@param path2 The second path to compare --@param pathtype The pathtype to pass to the function (I always use '1') --@param pathflags The pathflags to pass to the function (I always use '0') --@return (status, result) If status is false, result is an error message. Otherwise, result is a table of values containing -- 'return'. function srvsvc_netpathcompare(smbstate, server, path1, path2, pathtype, pathflags) local i, j local status, result local arguments local pos, align stdnse.print_debug(2, "MSRPC: Calling NetPathCompare(%s, %s) [%s]", path1, path2, smbstate['ip']) -- [in] [string,charset(UTF16)] uint16 *server_unc, arguments = msrpctypes.marshall_unicode_ptr(server, true) -- [in] [string,charset(UTF16)] uint16 path1[], arguments = arguments .. msrpctypes.marshall_unicode(path1, true) -- [in] [string,charset(UTF16)] uint16 path2[], arguments = arguments .. msrpctypes.marshall_unicode(path2, true) -- [in] uint32 pathtype, arguments = arguments .. msrpctypes.marshall_int32(pathtype) -- [in] uint32 pathflags arguments = arguments .. msrpctypes.marshall_int32(pathflags) -- Do the call status, result = call_function(smbstate, 0x20, arguments) if(status ~= true) then return false, result end stdnse.print_debug(3, "MSRPC: NetPathCompare() returned successfully") -- Make arguments easier to use arguments = result['arguments'] pos = 1 -- [in] [string,charset(UTF16)] uint16 *server_unc, -- [in] [string,charset(UTF16)] uint16 path1[], -- [in] [string,charset(UTF16)] uint16 path2[], -- [in] uint32 pathtype, -- [in] uint32 pathflags pos, result['return'] = msrpctypes.unmarshall_int32(arguments, pos) if(result['return'] == nil) then return false, "Read off the end of the packet (srvsvc.netpathcompare)" end if(result['return'] ~= 0) then return false, smb.get_status_name(result['return']) .. " (srvsvc.netpathcompare)" end return true, result end ---Call the NetPathCanonicalize() function, which is the target of ms08-067. -- --@param smbstate The SMB state table --@param server The IP or Hostname of the server (seems to be ignored but it's a good idea to have it) --@param path The path to canonicalize --@return (status, result, error_result) If status is false, result is an error message and error_result is -- the result table. Otherwise, result is a table of values. function srvsvc_netpathcanonicalize(smbstate, server, path) local i, j local status, result local arguments local pos, align stdnse.print_debug(2, "MSRPC: Calling NetPathCanonicalize(%s) [%s]", path, smbstate['ip']) -- [in] [string,charset(UTF16)] uint16 *server_unc, arguments = msrpctypes.marshall_unicode_ptr(server, true) -- [in] [string,charset(UTF16)] uint16 path[], arguments = arguments .. msrpctypes.marshall_unicode(path, true) -- [out] [size_is(maxbuf)] uint8 can_path[], -- [in] uint32 maxbuf, arguments = arguments .. msrpctypes.marshall_int32(2) -- [in] [string,charset(UTF16)] uint16 prefix[], arguments = arguments .. msrpctypes.marshall_unicode("\\", true) -- [in,out] uint32 pathtype, arguments = arguments .. msrpctypes.marshall_int32(1) -- [in] uint32 pathflags arguments = arguments .. msrpctypes.marshall_int32(1) -- Do the call status, result = call_function(smbstate, 0x1F, arguments) if(status ~= true) then return false, result end stdnse.print_debug(3, "MSRPC: NetPathCanonicalize() returned successfully") -- Make arguments easier to use arguments = result['arguments'] pos = 1 -- [in] [string,charset(UTF16)] uint16 *server_unc, -- [in] [string,charset(UTF16)] uint16 path[], -- [out] [size_is(maxbuf)] uint8 can_path[],A -- [in] uint32 maxbuf, -- [in] [string,charset(UTF16)] uint16 prefix[], -- [in,out] uint32 pathtype, -- [in] uint32 pathflags -- NOTE: This isn't being done correctly.. due to Wireshark's broken parsing, -- and Samba's possibly-broken definition, I'm not sure how this is supposed -- to be parsed. pos, result['max_count'] = msrpctypes.unmarshall_int32(arguments, pos) pos, result['can_path'] = msrpctypes.unmarshall_int32(arguments, pos) pos, result['type'] = msrpctypes.unmarshall_int32(arguments, pos) pos, result['return'] = msrpctypes.unmarshall_int32(arguments, pos) if(result['return'] == nil) then return false, "Read off the end of the packet (srvsvc.netpathcanonicalize)" end if(result['return'] ~= 0) then return false, smb.get_status_name(result['return']) .. " (srvsvc.netpathcanonicalize)", result end return true, result end ---Call the RpcOpenPrinterEx() function whose opnum is 69. -- -- http://msdn.microsoft.com/en-us/library/cc244809%28v=prot.13%29.aspx --@param smbstate The SMB state table --@param printer Printer share name --@return (status, result) If status is false, result is an error message. Otherwise, result is a printer handle. function spoolss_open_printer(smbstate,printer) local machine = msrpctypes.marshall_unicode_ptr("",true) local user = msrpctypes.marshall_unicode_ptr("",true) local arguments = msrpctypes.marshall_unicode_ptr(printer,true) arguments = arguments .. msrpctypes.marshall_int32(0) --devmod container arguments = arguments .. msrpctypes.marshall_int32(0) arguments = arguments .. msrpctypes.marshall_int32(0) --access we require arguments = arguments .. msrpctypes.marshall_int32(0x02020000) -- spool client container arguments = arguments .. msrpctypes.marshall_int32(1) arguments = arguments .. msrpctypes.marshall_int32(1) arguments = arguments .. msrpctypes.marshall_int32(12345135) local arguments2 = string.sub(machine,1,4) arguments2 = arguments2 .. string.sub(user,1,4) arguments2 = arguments2 .. msrpctypes.marshall_int32(7600) arguments2 = arguments2 .. msrpctypes.marshall_int32(3) arguments2 = arguments2 .. msrpctypes.marshall_int32(0) arguments2 = arguments2 .. msrpctypes.marshall_int32(9) arguments2 = arguments2 .. string.sub(machine,5,#machine) arguments2 = arguments2 .. string.sub(user,5,#user) arguments2 = msrpctypes.marshall_int32(#arguments2+4) .. arguments2 arguments = arguments .. arguments2 local status, result = call_function(smbstate, 69, arguments) if not status then stdnse.print_debug("MSRPC spoolss_open_printer(): %s ",result) end return status,result end ---Call the RpcStartDocPrinter() function whose opnum is 17. -- -- http://msdn.microsoft.com/en-us/library/cc244828%28v=prot.10%29.aspx --@param smbstate The SMB state table --@param printer_handle Printer handle returned by spoolss_open_printer() --@param filename Name of the file to print to --@return (status, result) If status is false, result is an error message. Otherwise, result is a print job id. function spoolss_start_doc_printer(smbstate,printer_handle,filename) local arguments = printer_handle local document_name = msrpctypes.marshall_unicode_ptr("nmap_test",true) local fname = msrpctypes.marshall_unicode_ptr(filename,true) local dtype = msrpctypes.marshall_int32(0) local document_container = msrpctypes.marshall_int32(1) arguments = arguments .. msrpctypes.marshall_int32(1) document_container = document_container .. msrpctypes.marshall_int32(12332131) document_container = document_container .. string.sub(document_name,1,4) document_container = document_container .. string.sub(fname,1,4) document_container = document_container .. string.sub(dtype,1,4) document_container = document_container .. string.sub(document_name,5,#document_name) document_container = document_container .. string.sub(fname,5,#fname) document_container = document_container .. string.sub(dtype,5,#dtype) arguments = arguments .. document_container local status, result = call_function(smbstate, 17, arguments) if not status then stdnse.print_debug("MSRPC spoolss_start_doc_printer(): %s",result) end return status,result end ---Call the RpcWritePrinter() function whose opnum is 19. -- -- http://msdn.microsoft.com/en-us/library/cc244831%28v=prot.10%29 --@param smbstate The SMB state table --@param printer_handle Printer handle returned by spoolss_open_printer() --@param data Actual data to write to a file --@return (status, result) If status is false, result is an error message. Otherwise, result is number of bytes written. function spoolss_write_printer(smbstate,printer_handle,data) stdnse.print_debug("len %d", #data) local padding_len = 4 - math.fmod(#data,4) local data_padding = nil if not (padding_len == 4) then data_padding = string.rep(bin.pack("H","00"),padding_len) end local arguments = printer_handle .. msrpctypes.marshall_int32(#data) --arguments = arguments .. msrpctypes.marshall_int32(#data) arguments = arguments .. data if data_padding then arguments = arguments .. data_padding end arguments = arguments .. msrpctypes.marshall_int32(#data) local status,result = call_function(smbstate, 19, arguments) if not status then stdnse.print_debug("MSRPC spoolss_write_printer(): %s",result) end return status,result end ---Call the EndDocPrinter() function whose opnum is 23. -- -- http://msdn.microsoft.com/en-us/library/cc244783%28v=prot.10%29 --@param smbstate The SMB state table --@param printer_handle Printer handle returned by spoolss_open_printer() --@return (status, result) If status is false, result is an error message. function spoolss_end_doc_printer(smbstate,printer_handle) local status,result = call_function(smbstate,23,printer_handle) if not status then stdnse.print_debug("MSRPC spoolss_end_doc_printer(): %s",result) end return status,result end ---Call the RpcAbortPrinter() function whose opnum is 21. -- -- http://msdn.microsoft.com/en-us/library/cc244757%28v=prot.13%29 --@param smbstate The SMB state table --@param printer_handle Printer handle returned by spoolss_open_printer() --@return (status, result) If status is false, result is an error message. function spoolss_abort_printer(smbstate,printer_handle) local status,result = call_function(smbstate,21,printer_handle) if not status then stdnse.print_debug("MSRPC spoolss_abort_printer(): %s",result) end return status,result end ---Helper function to convert binary UUID representation to usual string. -- --@param uuid UUID byte string --@return UUID converted to string representation function uuid_to_string(uuid) local pos, i1,s1,s2,c1,c2,c3,c4,c5,c6,c7,c8 = bin.unpack(" 1 then lookup_response.annotation = string.sub(data,pos,pos+annotation_length-2) end local padding = (4-(annotation_length%4)) if padding == 4 then padding = 0 end pos = pos + annotation_length + padding --skip lengths pos = pos + 8 local num_floors,floor_len,uuid, address_type,address_len,tcp_port,udp_port,ip_addr,saved_pos,ncalrpc,ncacn_np,netbios,ncacn_http pos, num_floors = bin.unpack("S",data,pos) elseif address_type == 0x08 then pos,lookup_response.udp_port = bin.unpack(">S",data,pos) elseif address_type == 0x09 then local i1,i2,i3,i4 pos,i1,i2,i3,i4 = bin.unpack("CCCC",data,pos) lookup_response.ip_addr = string.format("%d.%d.%d.%d",i1,i2,i3,i4) elseif address_type == 0x0f then lookup_response.ncacn_np = string.sub(data,pos,pos+address_len-2) floor_len = floor_len + address_len - 2 elseif address_type == 0x10 then lookup_response.ncalrpc = string.sub(data,pos,pos+address_len-2) floor_len = floor_len + address_len - 2 elseif address_type == 0x11 then lookup_response.netbios = string.sub(data,pos,pos+address_len-2) floor_len = floor_len + address_len - 2 elseif address_type == 0x1f then pos, lookup_response.ncacn_http = bin.unpack(">S",data,pos) else stdnse.print_debug("unknown address type %x",address_type) end end end pos = saved_pos + floor_len + 6 end return status,lookup_response end ---A proxy to a msrpctypes function that converts a PasswordProperties to an English string. -- -- I implemented this as a proxy so scripts don't have to make direct calls to -- msrpctypes functions. -- --@param val The value to convert. --@return A string that can be displayed to the user. function samr_PasswordProperties_tostr(val) return msrpctypes.samr_PasswordProperties_tostr(val) end ---A proxy to a msrpctypes function that converts a AcctFlags to -- an English string. -- -- I implemented this as a proxy so scripts don't have to make direct calls to -- msrpctypes functions. -- --@param val The value to convert. --@return A string that can be displayed to the user. function samr_AcctFlags_tostr(val) return msrpctypes.samr_AcctFlags_tostr(val) end ---Call the connect4 function, to obtain a "connect handle". -- -- This must be done before calling many of the SAMR functions. -- --@param smbstate The SMB state table --@param server The IP or Hostname of the server (seems to be ignored but it's -- a good idea to have it) --@return status true or false --@return If status is false, result is an error message. Otherwise, result is -- a table of values, the most useful one being 'connect_handle', which -- is required to call other functions. function samr_connect4(smbstate, server) local i, j local status, result local arguments local pos, align stdnse.print_debug(2, "MSRPC: Calling Connect4() [%s]", smbstate['ip']) -- [in,string,charset(UTF16)] uint16 *system_name, arguments = msrpctypes.marshall_unicode_ptr("\\\\" .. server, true) -- [in] uint32 unknown, arguments = arguments .. msrpctypes.marshall_int32(0x02) -- [in] samr_ConnectAccessMask access_mask, arguments = arguments .. msrpctypes.marshall_samr_ConnectAccessMask("SAMR_ACCESS_ENUM_DOMAINS|SAMR_ACCESS_OPEN_DOMAIN") -- [out,ref] policy_handle *connect_handle -- Do the call status, result = call_function(smbstate, 0x3E, arguments) if(status ~= true) then return false, result end stdnse.print_debug(3, "MSRPC: Connect4() returned successfully") -- Make arguments easier to use arguments = result['arguments'] pos = 1 -- [in,string,charset(UTF16)] uint16 *system_name, -- [in] uint32 unknown, -- [in] samr_ConnectAccessMask access_mask, -- [out,ref] policy_handle *connect_handle pos, result['connect_handle'] = msrpctypes.unmarshall_policy_handle(arguments, pos) pos, result['return'] = msrpctypes.unmarshall_int32(arguments, pos) if(result['return'] == nil) then return false, "Read off the end of the packet (samr.connect4)" end if(result['return'] ~= 0) then return false, smb.get_status_name(result['return']) .. " (samr.connect4)" end return true, result end ---Call the enumdomains function, which returns a list of all domains in use by the system. -- --@param smbstate The SMB state table --@param connect_handle The connect_handle, returned by samr_connect4() --@return (status, result) If status is false, result is an error message. Otherwise, result is a table of values, the most -- useful one being 'domains', which is a list of the domains. function samr_enumdomains(smbstate, connect_handle) local i, j local status, result local arguments local result local pos, align stdnse.print_debug(2, "MSRPC: Calling EnumDomains() [%s]", smbstate['ip']) -- [in,ref] policy_handle *connect_handle, arguments = msrpctypes.marshall_policy_handle(connect_handle) -- [in,out,ref] uint32 *resume_handle, arguments = arguments .. msrpctypes.marshall_int32(0) -- [in] uint32 buf_size, arguments = arguments .. msrpctypes.marshall_int32(0x2000) -- [out] samr_SamArray *sam, -- [out] uint32 num_entries -- Do the call status, result = call_function(smbstate, 0x06, arguments) if(status ~= true) then return false, result end stdnse.print_debug(3, "MSRPC: EnumDomains() returned successfully") -- Make arguments easier to use arguments = result['arguments'] -- [in,ref] policy_handle *connect_handle, -- [in,out,ref] uint32 *resume_handle, pos, result['resume_handle'] = msrpctypes.unmarshall_int32(arguments, pos) -- [in] uint32 buf_size, -- [out] samr_SamArray *sam, pos, result['sam'] = msrpctypes.unmarshall_samr_SamArray_ptr(arguments, pos) -- [out] uint32 num_entries pos, result['num_entries'] = msrpctypes.unmarshall_int32(arguments, pos) pos, result['return'] = msrpctypes.unmarshall_int32(arguments, pos) if(result['return'] == nil) then return false, "Read off the end of the packet (samr.enumdomains)" end if(result['return'] ~= 0) then return false, smb.get_status_name(result['return']) .. " (samr.enumdomains)" end return true, result end ---Call the LookupDomain function, which converts a domain's name into its sid, which is -- required to do operations on the domain. -- --@param smbstate The SMB state table --@param connect_handle The connect_handle, returned by samr_connect4 --@param domain The name of the domain (all domain names can be obtained with samr_enumdomains) --@return (status, result) If status is false, result is an error message. Otherwise, result is a table of values, the most -- useful one being 'sid', which is required to call other functions. function samr_lookupdomain(smbstate, connect_handle, domain) local i, j local status, result local arguments local pos, align local referent_id stdnse.print_debug(2, "MSRPC: Calling LookupDomain(%s) [%s]", domain, smbstate['ip']) -- [in,ref] policy_handle *connect_handle, arguments = msrpctypes.marshall_policy_handle(connect_handle) -- [in,ref] lsa_String *domain_name, arguments = arguments .. msrpctypes.marshall_lsa_String(domain) -- [out] dom_sid2 *sid -- Do the call status, result = call_function(smbstate, 0x05, arguments) if(status ~= true) then return false, result end stdnse.print_debug(3, "MSRPC: LookupDomain() returned successfully") -- Make arguments easier to use arguments = result['arguments'] -- [in,ref] policy_handle *connect_handle, -- [in,ref] lsa_String *domain_name, -- [out] dom_sid2 *sid pos, result['sid'] = msrpctypes.unmarshall_dom_sid2_ptr(arguments, pos) pos, result['return'] = msrpctypes.unmarshall_int32(arguments, pos) if(result['return'] == nil) then return false, "Read off the end of the packet (samr.lookupdomain)" end if(result['return'] ~= 0) then return false, smb.get_status_name(result['return']) .. " (samr.lookupdomain)" end return true, result end ---Call OpenDomain, which returns a handle to the domain identified by the given sid. -- This is required before calling certain functions. -- --@param smbstate The SMB state table --@param connect_handle The connect_handle, returned by samr_connect4 --@param sid The sid for the domain, returned by samr_lookupdomain --@return (status, result) If status is false, result is an error message. Otherwise, result is a table of values, the most -- useful one being 'domain_handle', which is used to call other functions. function samr_opendomain(smbstate, connect_handle, sid) local i, j local status, result local arguments local pos, align stdnse.print_debug(2, "MSRPC: Calling OpenDomain(%s) [%s]", sid, smbstate['ip']) -- [in,ref] policy_handle *connect_handle, arguments = msrpctypes.marshall_policy_handle(connect_handle) -- [in] samr_DomainAccessMask access_mask, arguments = arguments .. msrpctypes.marshall_samr_DomainAccessMask("DOMAIN_ACCESS_LOOKUP_INFO_1|DOMAIN_ACCESS_LOOKUP_INFO_2|DOMAIN_ACCESS_ENUM_ACCOUNTS|DOMAIN_ACCESS_OPEN_ACCOUNT") -- [in,ref] dom_sid2 *sid, arguments = arguments .. msrpctypes.marshall_dom_sid2(sid) -- [out,ref] policy_handle *domain_handle -- Do the call status, result = call_function(smbstate, 0x07, arguments) if(status ~= true) then return false, result end stdnse.print_debug(3, "MSRPC: OpenDomain() returned successfully") -- Make arguments easier to use arguments = result['arguments'] pos = 1 -- [in,ref] policy_handle *connect_handle, -- [in] samr_DomainAccessMask access_mask, -- [in,ref] dom_sid2 *sid, -- [out,ref] policy_handle *domain_handle pos, result['domain_handle'] = msrpctypes.unmarshall_policy_handle(arguments, pos) pos, result['return'] = msrpctypes.unmarshall_int32(arguments, pos) if(result['return'] == nil) then return false, "Read off the end of the packet (samr.opendomain)" end if(result['return'] ~= 0) then return false, smb.get_status_name(result['return']) .. " (samr.opendomain)" end return true, result end ---Call EnumDomainUsers, which returns a list of users only. To get more information about the users, the -- QueryDisplayInfo() function can be used. -- --@param smbstate The SMB state table --@param domain_handle The domain_handle, returned by samr_opendomain --@return (status, result) If status is false, result is an error message. Otherwise, result is a table of values, the most -- useful one being 'names', which is a list of usernames in that domain. function samr_enumdomainusers(smbstate, domain_handle) local i, j local status, result local arguments local pos, align stdnse.print_debug(2, "MSRPC: Calling EnumDomainUsers() [%s]", smbstate['ip']) -- [in,ref] policy_handle *domain_handle, arguments = msrpctypes.marshall_policy_handle(domain_handle) -- [in,out,ref] uint32 *resume_handle, arguments = arguments .. msrpctypes.marshall_int32_ptr(nil) -- [in] samr_AcctFlags acct_flags, arguments = arguments .. msrpctypes.marshall_samr_AcctFlags("ACB_NONE") -- [in] uint32 max_size, arguments = arguments .. msrpctypes.marshall_int32(0x0400) -- [out] samr_SamArray *sam, -- [out] uint32 num_entries -- Do the call status, result = call_function(smbstate, 0x0d, arguments) if(status ~= true) then return false, result end stdnse.print_debug(3, "MSRPC: EnumDomainUsers() returned successfully") -- Make arguments easier to use arguments = result['arguments'] pos = 1 -- [in,ref] policy_handle *domain_handle, -- [in,out,ref] uint32 *resume_handle, pos, result['resume_handle'] = msrpctypes.unmarshall_int32(arguments, pos) -- [in] samr_AcctFlags acct_flags, -- [in] uint32 max_size, -- [out] samr_SamArray *sam, pos, result['sam'] = msrpctypes.unmarshall_samr_SamArray_ptr(arguments, pos) -- [out] uint32 num_entries pos, result['num_entries'] = msrpctypes.unmarshall_int32(arguments, pos) pos, result['return'] = msrpctypes.unmarshall_int32(arguments, pos) if(result['return'] == nil) then return false, "Read off the end of the packet (samr.enumdomainusers)" end if(result['return'] ~= 0) then return false, smb.get_status_name(result['return']) .. " (samr.enumdomainusers)" end return true, result end ---Call QueryDisplayInfo, which returns a list of users with accounts on the system, as well as extra information about -- them (their full name and description). -- -- I found in testing that trying to get all the users at once is a mistake, it returns ERR_BUFFER_OVERFLOW, so instead I'm -- only reading one user at a time. My recommendation is to start at index = 0, and increment until you stop getting -- an error indicator in result['return']. -- --@param smbstate The SMB state table --@param domain_handle The domain handle, returned by samr_opendomain --@param index The index of the user to check; the first user is 0, next is 1, etc. --@param count [optional] The number of users to return; you may want to be careful about going too high. Default: 1. --@return (status, result) If status is false, result is an error message. Otherwise, result is a table of values, the most -- useful ones being 'names', a list of all the usernames, and 'details', a further list of tables with the elements -- 'name', 'fullname', and 'description' (note that any of them can be nil if the server didn't return a value). Finally, -- 'flags' is the numeric flags for the user, while 'flags_list' is an array of strings, representing the flags. function samr_querydisplayinfo(smbstate, domain_handle, index, count) local i, j local status, result local arguments local pos, align if(count == nil) then count = 1 end -- This loop is because, in my testing, if I asked for all the results at once, it would blow up (ERR_BUFFER_OVERFLOW). So, instead, -- I put a little loop here and grab the names individually. stdnse.print_debug(2, "MSRPC: Calling QueryDisplayInfo(%d) [%s]", index, smbstate['ip']) -- [in,ref] policy_handle *domain_handle, arguments = msrpctypes.marshall_policy_handle(domain_handle) -- [in] uint16 level, arguments = arguments .. msrpctypes.marshall_int16(1) -- Level (1 = users, 3 = groups, 4 = usernames only) -- [in] uint32 start_idx, arguments = arguments .. msrpctypes.marshall_int32(index) -- [in] uint32 max_entries, arguments = arguments .. msrpctypes.marshall_int32(count) -- [in] uint32 buf_size, arguments = arguments .. msrpctypes.marshall_int32(0x7FFFFFFF) -- [out] uint32 total_size, -- [out] uint32 returned_size, -- [out,switch_is(level)] samr_DispInfo info -- Do the call status, result = call_function(smbstate, 0x28, arguments) if(status ~= true) then return false, result end stdnse.print_debug(3, "MSRPC: QueryDisplayInfo() returned successfully", i) -- Make arguments easier to use arguments = result['arguments'] pos = 1 -- [in,ref] policy_handle *domain_handle, -- [in] uint16 level, -- [in] uint32 start_idx, -- [in] uint32 max_entries, -- [in] uint32 buf_size, -- [out] uint32 total_size, pos, result['total_size'] = msrpctypes.unmarshall_int32(arguments, pos) -- [out] uint32 returned_size, pos, result['returned_size'] = msrpctypes.unmarshall_int32(arguments, pos) -- [out,switch_is(level)] samr_DispInfo info pos, result['info'] = msrpctypes.unmarshall_samr_DispInfo(arguments, pos) if(pos == nil) then return false, "SMB: An error occurred while calling unmarshall_samr_DispInfo" end -- Get the return value pos, result['return'] = msrpctypes.unmarshall_int32(arguments, pos) if(result['return'] == nil) then return false, "Read off the end of the packet (samr.querydisplayall)" end if(result['return'] ~= 0 and result['return'] ~= smb.status_codes['NT_STATUS_MORE_ENTRIES']) then return false, smb.get_status_name(result['return']) .. " (samr.querydisplayinfo)" end return true, result end ---Call QueryDomainInfo2, which grabs various data about a domain. -- --@param smbstate The SMB state table --@param domain_handle The domain_handle, returned by samr_opendomain --@param level The level, which determines which type of information to query for. See the @return section -- for details. --@return (status, result) If status is false, result is an error message. Otherwise, result is a table of values, -- and the values that are returned are dependent on the 'level' settings: -- Level 1: -- 'min_password_length' (in characters) -- 'password_history_length' (in passwords) -- 'password_properties' -- 'password_properties_list' (array of strings) -- 'max_password_age' (in days) -- 'min_password_age' (in days) -- Level 8 -- 'create_time' (1/10ms since 1601) -- 'create_date' (string) -- Level 12 -- 'lockout_duration' (in minutes) -- 'lockout_window' (in minutes) -- 'lockout_threshold' (in attempts) function samr_querydomaininfo2(smbstate, domain_handle, level) local i, j local status, result local arguments local pos, align stdnse.print_debug(2, "MSRPC: Calling QueryDomainInfo2(%d) [%s]", level, smbstate['ip']) -- [in,ref] policy_handle *domain_handle, arguments = msrpctypes.marshall_policy_handle(domain_handle) -- [in] uint16 level, arguments = arguments .. msrpctypes.marshall_int32(level) -- [out,switch_is(level)] samr_DomainInfo *info -- Do the call status, result = call_function(smbstate, 0x2e, arguments) if(status ~= true) then return false, result end stdnse.print_debug(3, "MSRPC: QueryDomainInfo2() returned successfully") -- Make arguments easier to use arguments = result['arguments'] pos = 1 -- [in,ref] policy_handle *domain_handle, -- [in] uint16 level, -- [out,switch_is(level)] samr_DomainInfo *info pos, result['info'] = msrpctypes.unmarshall_samr_DomainInfo_ptr(arguments, pos) if(pos == nil) then return false, "unmarshall_samr_DomainInfo_ptr() returned an error" end pos, result['return'] = msrpctypes.unmarshall_int32(arguments, pos) if(result['return'] == nil) then return false, "Read off the end of the packet (samr.querydomaininfo2)" end if(result['return'] ~= 0) then return false, smb.get_status_name(result['return']) .. " (samr.querydomaininfo2)" end return true, result end ---Call the EnumDomainAliases function, which retrieves a list of groups for a given domain -- --@param smbstate The SMB state table --@param domain_handle The domain_handle, returned by samr_opendomain --@return (status, result) If status is false, result is an error message. Otherwise, result is a table of values. function samr_enumdomainaliases(smbstate, domain_handle) local i, j local status, result local arguments local pos, align arguments = '' -- [in] policy_handle *domain_handle, arguments = arguments .. msrpctypes.marshall_policy_handle(domain_handle) -- [in,out,ref] uint32 *resume_handle, arguments = arguments .. msrpctypes.marshall_int32_ptr(nil) -- [out,ref] samr_SamArray **sam, -- [in] uint32 max_size, (note: Wireshark says this is flags. Either way..) arguments = arguments .. msrpctypes.marshall_int32(0x400) -- [out,ref] uint32 *num_entries -- Do the call status, result = call_function(smbstate, 0x0f, arguments) if(status ~= true) then return false, result end -- Make arguments easier to use arguments = result['arguments'] pos = 1 -- [in] policy_handle *domain_handle, -- [in,out,ref] uint32 *resume_handle, pos, result['resume_handle'] = msrpctypes.unmarshall_int32(arguments, pos) -- [out,ref] samr_SamArray **sam, pos, result['sam'] = msrpctypes.unmarshall_samr_SamArray_ptr(arguments, pos) -- [in] uint32 max_size, -- [out,ref] uint32 *num_entries pos, result['num_entries'] = msrpctypes.unmarshall_int32(arguments, pos) pos, result['return'] = msrpctypes.unmarshall_int32(arguments, pos) if(result['return'] == nil) then return false, "Read off the end of the packet (samr.enumdomainaliases)" end if(result['return'] ~= 0) then return false, smb.get_status_name(result['return']) .. " (samr.enumdomainaliases)" end return true, result end ---Call the EnumDomainAliases function, which retrieves a list of groups for a given domain -- --@param smbstate The SMB state table --@param domain_handle The domain_handle, returned by samr_opendomain --@return (status, result) If status is false, result is an error message. Otherwise, result is a table of values. function samr_lookupnames(smbstate, domain_handle, names) local i, j local status, result local arguments local pos, align arguments = '' -- [in,ref] policy_handle *domain_handle, arguments = arguments .. msrpctypes.marshall_policy_handle(domain_handle) -- [in,range(0,1000)] uint32 num_names, arguments = arguments .. msrpctypes.marshall_int32(#names) -- [in,size_is(1000),length_is(num_names)] lsa_String names[], arguments = arguments .. msrpctypes.marshall_lsa_String_array2(names) -- [out,ref] samr_Ids *rids, -- [out,ref] samr_Ids *types -- Do the call status, result = call_function(smbstate, 0x11, arguments) if(status ~= true) then return false, result end -- Make arguments easier to use arguments = result['arguments'] pos = 1 -- [in,ref] policy_handle *domain_handle, -- [in,range(0,1000)] uint32 num_names, -- [in,size_is(1000),length_is(num_names)] lsa_String names[], -- [out,ref] samr_Ids *rids, pos, result['rids'] = msrpctypes.unmarshall_samr_Ids(arguments, pos) -- [out,ref] samr_Ids *types pos, result['types'] = msrpctypes.unmarshall_samr_Ids(arguments, pos) pos, result['return'] = msrpctypes.unmarshall_int32(arguments, pos) if(result['return'] == nil) then return false, "Read off the end of the packet (samr.lookupnames)" end if(result['return'] == smb.status_codes['NT_STATUS_NONE_MAPPED']) then return false, "Couldn't find any names the host recognized" end if(result['return'] ~= 0 and result['return'] ~= smb.status_codes['NT_STATUS_SOME_NOT_MAPPED']) then return false, smb.get_status_name(result['return']) .. " (samr.lookupnames)" end return true, result end ---Call the OpenAlias function, which gets a handle to a group. -- --@param smbstate The SMB state table --@param domain_handle The domain_handle, returned by samr_opendomain --@param rid The RID of the alias --@return (status, result) If status is false, result is an error message. Otherwise, result is a table of values. function samr_openalias(smbstate, domain_handle, rid) local i, j local status, result local arguments local pos, align arguments = '' -- [in,ref] policy_handle *domain_handle, arguments = arguments .. msrpctypes.marshall_policy_handle(domain_handle) -- [in] samr_AliasAccessMask access_mask, arguments = arguments .. msrpctypes.marshall_int32(0x0002000c) -- Full read permission -- [in] uint32 rid, arguments = arguments .. msrpctypes.marshall_int32(rid) -- [out,ref] policy_handle *alias_handle -- Do the call status, result = call_function(smbstate, 0x1b, arguments) if(status ~= true) then return false, result end -- Make arguments easier to use arguments = result['arguments'] pos = 1 -- [in,ref] policy_handle *domain_handle, -- [in] samr_AliasAccessMask access_mask, -- [in] uint32 rid, -- [out,ref] policy_handle *alias_handle pos, result['alias_handle'] = msrpctypes.unmarshall_policy_handle(arguments, pos) pos, result['return'] = msrpctypes.unmarshall_int32(arguments, pos) if(result['return'] == nil) then return false, "Read off the end of the packet (samr.openalias)" end if(result['return'] ~= 0) then return false, smb.get_status_name(result['return']) .. " (samr.openalias)" end return true, result end ---Call the GetAliasMembership function. --Sends the "raw" data, without marshaling. -- --@param smbstate The SMB state table --@param alias_handle The alias_handle, already marshaled --@param args Actual data to send, already marshaled --@return (status, result) If status is false, result is an error message. Otherwise, result is a table of values. function samr_getaliasmembership(smbstate, alias_handle,args) local status, result local arguments arguments = '' arguments = arguments .. alias_handle .. args -- Do the call status, result = call_function(smbstate, 0x10, arguments) if(status ~= true) then return false, result end return true, result end ---Call the GetMembersInAlias function, which retrieves a list of users in -- a group. -- --@param smbstate The SMB state table --@param alias_handle The alias_handle, returned by samr_openalias --@return (status, result) If status is false, result is an error message. Otherwise, result is a table of values. function samr_getmembersinalias(smbstate, alias_handle) local i, j local status, result local arguments local pos, align arguments = '' -- [in,ref] policy_handle *alias_handle, arguments = arguments .. msrpctypes.marshall_policy_handle(alias_handle) -- [out,ref] lsa_SidArray *sids -- Do the call status, result = call_function(smbstate, 0x21, arguments) if(status ~= true) then return false, result end -- Make arguments easier to use arguments = result['arguments'] pos = 1 -- [in,ref] policy_handle *alias_handle, -- [out,ref] lsa_SidArray *sids pos, result['sids'] = msrpctypes.unmarshall_lsa_SidArray(arguments, pos) pos, result['return'] = msrpctypes.unmarshall_int32(arguments, pos) if(result['return'] == nil) then return false, "Read off the end of the packet (samr.getmembersinalias)" end if(result['return'] ~= 0) then return false, smb.get_status_name(result['return']) .. " (samr.getmembersinalias)" end return true, result end -- Call the LookupRids function, which converts a list of RIDs to -- names. -- --NOTE: This doesn't appear to work (it generates a fault, despite the packet being properly formatted). --if you ever feel like you need this function, check out lsa_lookupsids2. -- --@param smbstate The SMB state table --@param domain_handle The domain_handle, returned by samr_opendomain --@param rids An array of RIDs to look up --@return (status, result) If status is false, result is an error message. Otherwise, result is a table of values. --function samr_lookuprids(smbstate, domain_handle, rids) -- local i, j -- local status, result -- local arguments -- local pos, align -- -- arguments = '' -- ---- [in,ref] policy_handle *domain_handle, -- arguments = arguments .. msrpctypes.marshall_policy_handle(domain_handle) ---- [in,range(0,1000)] uint32 num_rids, -- arguments = arguments .. msrpctypes.marshall_int32(#rids) ---- [in,size_is(1000),length_is(num_rids)] uint32 rids[], -- arguments = arguments .. msrpctypes.marshall_int32_array(rids) ---- [out,ref] lsa_Strings *names, ---- [out,ref] samr_Ids *types -- -- -- -- Do the call -- status, result = call_function(smbstate, 0x12, arguments) -- if(status ~= true) then -- return false, result -- end -- -- -- Make arguments easier to use -- arguments = result['arguments'] -- pos = 1 -- ---- [in,ref] policy_handle *domain_handle, ---- [in,range(0,1000)] uint32 num_rids, ---- [in,size_is(1000),length_is(num_rids)] uint32 rids[], ---- [out,ref] lsa_Strings *names, ---- [out,ref] samr_Ids *types -- -- -- pos, result['return'] = msrpctypes.unmarshall_int32(arguments, pos) --stdnse.print_debug("Return = %08x\n", result['return']) -- if(result['return'] == nil) then -- return false, "Read off the end of the packet (samr.getmembersinalias)" -- end -- if(result['return'] ~= 0) then -- return false, smb.get_status_name(result['return']) .. " (samr.getmembersinalias)" -- end -- -- return true, result --end ---Call the close function, which closes a handle of any type (for example, domain_handle or connect_handle) --@param smbstate The SMB state table --@param handle The handle to close --@return (status, result) If status is false, result is an error message. Otherwise, result is potentially -- a table of values, none of which are likely to be used. function samr_close(smbstate, handle) local i, j local status, result local arguments local pos, align stdnse.print_debug(2, "MSRPC: Calling Close() [%s]", smbstate['ip']) -- [in,out,ref] policy_handle *handle arguments = msrpctypes.marshall_policy_handle(handle) -- Do the call status, result = call_function(smbstate, 0x01, arguments) if(status ~= true) then return false, result end stdnse.print_debug(3, "MSRPC: Close() returned successfully") -- Make arguments easier to use arguments = result['arguments'] pos = 1 -- [in,out,ref] policy_handle *handle pos, result['handle'] = msrpctypes.unmarshall_policy_handle(arguments, pos) pos, result['return'] = msrpctypes.unmarshall_int32(arguments, pos) if(result['return'] == nil) then return false, "Read off the end of the packet (samr.close)" end if(result['return'] ~= 0) then return false, smb.get_status_name(result['return']) .. " (samr.close)" end return true, result end ---Call the LsarOpenPolicy2 function, to obtain a "policy handle". This must be done before calling many -- of the LSA functions. -- --@param smbstate The SMB state table --@param server The IP or Hostname of the server (seems to be ignored but it's a good idea to have it) --@return (status, result) If status is false, result is an error message. Otherwise, result is a table of values, the most -- useful one being 'policy_handle', which is required to call other functions. function lsa_openpolicy2(smbstate, server) local i, j local status, result local arguments local pos, align stdnse.print_debug(2, "MSRPC: Calling LsarOpenPolicy2() [%s]", smbstate['ip']) -- [in,unique] [string,charset(UTF16)] uint16 *system_name, arguments = msrpctypes.marshall_unicode_ptr(server, true) -- [in] lsa_ObjectAttribute *attr, arguments = arguments .. msrpctypes.marshall_lsa_ObjectAttribute() -- [in] uint32 access_mask, arguments = arguments .. msrpctypes.marshall_int32(0x00000800) -- [out] policy_handle *handle -- Do the call status, result = call_function(smbstate, 0x2C, arguments) if(status ~= true) then return false, result end stdnse.print_debug(3, "MSRPC: LsarOpenPolicy2() returned successfully") -- Make arguments easier to use arguments = result['arguments'] pos = 1 -- [in,unique] [string,charset(UTF16)] uint16 *system_name, -- [in] lsa_ObjectAttribute *attr, -- [in] uint32 access_mask, -- [out] policy_handle *handle pos, result['policy_handle'] = msrpctypes.unmarshall_policy_handle(arguments, pos) pos, result['return'] = msrpctypes.unmarshall_int32(arguments, pos) if(result['return'] == nil) then return false, "Read off the end of the packet (lsa.openpolicy2)" end if(result['return'] ~= 0) then return false, smb.get_status_name(result['return']) .. " (lsa.openpolicy2)" end return true, result end ---Call the LsarLookupNames2 function, to convert the server's name into a sid. -- --@param smbstate The SMB state table --@param policy_handle The policy handle returned by lsa_openpolicy2 --@param names An array of names to look up. To get a SID, only one of the names needs to be valid. --@return (status, result) If status is false, result is an error message. Otherwise, result is a table of values. -- The most useful result is 'domains', which is a list of domains known to the server. And, for each of the -- domains, there is a 'name' entry, which is a string, and a 'sid' entry, which is yet another object which -- can be passed to functions that understand SIDs. function lsa_lookupnames2(smbstate, policy_handle, names) local i, j local status, result local arguments local result local pos, align stdnse.print_debug(2, "MSRPC: Calling LsarLookupNames2(%s) [%s]", stdnse.strjoin(", ", names), smbstate['ip']) -- [in] policy_handle *handle, arguments = msrpctypes.marshall_policy_handle(policy_handle) -- [in,range(0,1000)] uint32 num_names, arguments = arguments .. msrpctypes.marshall_int32(#names) -- [in,size_is(num_names)] lsa_String names[], arguments = arguments .. msrpctypes.marshall_lsa_String_array(names) -- [out,unique] lsa_RefDomainList *domains, -- [in,out] lsa_TransSidArray2 *sids, arguments = arguments .. msrpctypes.marshall_lsa_TransSidArray2({nil}) -- [in] lsa_LookupNamesLevel level, arguments = arguments .. msrpctypes.marshall_lsa_LookupNamesLevel("LOOKUP_NAMES_ALL") -- [in,out] uint32 *count, arguments = arguments .. msrpctypes.marshall_int32(0) -- [in] uint32 unknown1, arguments = arguments .. msrpctypes.marshall_int32(0) -- [in] uint32 unknown2 arguments = arguments .. msrpctypes.marshall_int32(2) -- Do the call status, result = call_function(smbstate, 0x3a, arguments) if(status ~= true) then return false, result end stdnse.print_debug(3, "MSRPC: LsarLookupNames2() returned successfully") -- Make arguments easier to use arguments = result['arguments'] pos = 1 -- [in] policy_handle *handle, -- [in,range(0,1000)] uint32 num_names, -- [in,size_is(num_names)] lsa_String names[], -- [out,unique] lsa_RefDomainList *domains, pos, result['domains'] = msrpctypes.unmarshall_lsa_RefDomainList_ptr(arguments, pos) -- [in,out] lsa_TransSidArray2 *rids, pos, result['rids'] = msrpctypes.unmarshall_lsa_TransSidArray2(arguments, pos) -- [in] lsa_LookupNamesLevel level, -- [in,out] uint32 *count, pos, result['count'] = msrpctypes.unmarshall_int32(arguments, pos) -- [in] uint32 unknown1, -- [in] uint32 unknown2 pos, result['return'] = msrpctypes.unmarshall_int32(arguments, pos) if(result['return'] == nil) then return false, "Read off the end of the packet (lsa.lookupnames2)" end if(result['return'] == smb.status_codes['NT_STATUS_NONE_MAPPED']) then return false, "Couldn't find any names the host recognized" end if(result['return'] ~= 0 and result['return'] ~= smb.status_codes['NT_STATUS_SOME_NOT_MAPPED']) then return false, smb.get_status_name(result['return']) .. " (lsa.lookupnames2)" end return true, result end ---Call the LsarLookupSids2 function, to convert a list of SIDs to their names -- --@param smbstate The SMB state table --@param policy_handle The policy handle returned by lsa_openpolicy2 --@param sids The SIDs to look up (will probably be the server's SID with "-[rid]" appended --@return (status, result) If status is false, result is an error message. Otherwise, result is a table of values. -- The element 'domains' is identical to the lookupnames2() element called 'domains'. The element 'names' is a -- list of strings, for the usernames (not necessary a 1:1 mapping with the RIDs), and the element 'details' is -- a table containing more information about each name, even if the name wasn't found (this one is a 1:1 mapping -- with the RIDs). function lsa_lookupsids2(smbstate, policy_handle, sids) local i, j local status, result local arguments local result local pos, align stdnse.print_debug(2, "MSRPC: Calling LsarLookupSids2(%s) [%s]", stdnse.strjoin(", ", sids), smbstate['ip']) -- [in] policy_handle *handle, arguments = msrpctypes.marshall_policy_handle(policy_handle) -- [in] lsa_SidArray *sids, arguments = arguments .. msrpctypes.marshall_lsa_SidArray(sids) -- [out,unique] lsa_RefDomainList *domains, -- [in,out] lsa_TransNameArray2 *names, arguments = arguments .. msrpctypes.marshall_lsa_TransNameArray2(nil) -- [in] uint16 level, arguments = arguments .. msrpctypes.marshall_int16(1) -- [in,out] uint32 *count, arguments = arguments .. msrpctypes.marshall_int32(0) -- [in] uint32 unknown1, arguments = arguments .. msrpctypes.marshall_int32(0) -- [in] uint32 unknown2 arguments = arguments .. msrpctypes.marshall_int32(2) -- Do the call status, result = call_function(smbstate, 0x39, arguments) if(status ~= true) then return false, result end -- Make arguments easier to use arguments = result['arguments'] -- [in] policy_handle *handle, -- [in] lsa_SidArray *sids, -- [out,unique] lsa_RefDomainList *domains, pos, result['domains'] = msrpctypes.unmarshall_lsa_RefDomainList_ptr(arguments, pos) -- [in,out] lsa_TransNameArray2 *names, pos, result['names'] = msrpctypes.unmarshall_lsa_TransNameArray2(arguments, pos) -- [in] uint16 level, -- [in,out] uint32 *count, local count pos, result['count'] = msrpctypes.unmarshall_int32(arguments, pos) -- [in] uint32 unknown1, -- [in] uint32 unknown2 pos, result['return'] = msrpctypes.unmarshall_int32(arguments, pos) if(result['return'] == nil) then return false, "Read off the end of the packet (lsa.lookupnames2)" end if(result['return'] ~= 0 and result['return'] ~= smb.status_codes['NT_STATUS_SOME_NOT_MAPPED'] and result['return'] ~= smb.status_codes['NT_STATUS_NONE_MAPPED']) then return false, smb.get_status_name(result['return']) .. " (lsa.lookupsids2)" end stdnse.print_debug(3, "MSRPC: LsarLookupSids2(): Returning") return true, result end ---Call the close function, which closes a session created with a lsa_openpolicy-style function --@param smbstate The SMB state table --@param handle The handle to close --@return (status, result) If status is false, result is an error message. Otherwise, result is potentially -- a table of values, none of which are likely to be used. function lsa_close(smbstate, handle) local i, j local status, result local arguments local pos, align stdnse.print_debug(2, "MSRPC: Calling LsaClose() [%s]", smbstate['ip']) -- [in,out] policy_handle *handle arguments = msrpctypes.marshall_policy_handle(handle) -- Do the call status, result = call_function(smbstate, 0x00, arguments) if(status ~= true) then return false, result end -- Make arguments easier to use arguments = result['arguments'] pos = 1 -- [in,out] policy_handle *handle pos, result['handle'] = msrpctypes.unmarshall_policy_handle(arguments, pos) pos, result['return'] = msrpctypes.unmarshall_int32(arguments, pos) if(result['return'] == nil) then return false, "Read off the end of the packet (lsa.close)" end if(result['return'] ~= 0) then return false, smb.get_status_name(result['return']) .. " (lsa.close)" end stdnse.print_debug(3, "MSRPC: LsaClose() returned successfully") return true, result end ---A proxy to a msrpctypes function that converts a SidType to an -- English string. -- -- I implemented this as a proxy so scripts don't have to make direct calls to -- msrpctypes functions. -- --@param val The value to convert. --@return A string that can be displayed to the user. function lsa_SidType_tostr(val) return msrpctypes.lsa_SidType_tostr(val) end ---Call the OpenHKU function, to obtain a handle to the HKEY_USERS hive -- --@param smbstate The SMB state table --@return (status, result) If status is false, result is an error message. Otherwise, result is a table of values, the most -- useful one being 'handle', which is required to call other winreg functions. function winreg_openhku(smbstate) local i, j local status, result local arguments local pos, align stdnse.print_debug(2, "MSRPC: Calling OpenHKU() [%s]", smbstate['ip']) -- [in] uint16 *system_name, arguments = msrpctypes.marshall_int16_ptr(0x1337, true) -- [in] winreg_AccessMask access_mask, arguments = arguments .. msrpctypes.marshall_winreg_AccessMask('MAXIMUM_ALLOWED_ACCESS') -- [out,ref] policy_handle *handle -- Do the call status, result = call_function(smbstate, 0x04, arguments) if(status ~= true) then return false, result end stdnse.print_debug(3, "MSRPC: OpenHKU() returned successfully") -- Make arguments easier to use arguments = result['arguments'] pos = 1 -- [in] uint16 *system_name, -- [in] winreg_AccessMask access_mask, -- [out,ref] policy_handle *handle pos, result['handle'] = msrpctypes.unmarshall_policy_handle(arguments, pos) pos, result['return'] = msrpctypes.unmarshall_int32(arguments, pos) if(result['return'] == nil) then return false, "Read off the end of the packet (winreg.openhku)" end if(result['return'] ~= 0) then return false, smb.get_status_name(result['return']) .. " (winreg.openhku)" end return true, result end ---Call the OpenHKLM function, to obtain a handle to the HKEY_LOCAL_MACHINE hive -- --@param smbstate The SMB state table --@return (status, result) If status is false, result is an error message. Otherwise, result is a table of values, the most -- useful one being 'handle', which is required to call other winreg functions. function winreg_openhklm(smbstate) local i, j local status, result local arguments local pos, align stdnse.print_debug(2, "MSRPC: Calling OpenHKLM() [%s]", smbstate['ip']) -- [in] uint16 *system_name, arguments = msrpctypes.marshall_int16_ptr(0x1337, true) -- [in] winreg_AccessMask access_mask, arguments = arguments .. msrpctypes.marshall_winreg_AccessMask('MAXIMUM_ALLOWED_ACCESS') -- [out,ref] policy_handle *handle -- Do the call status, result = call_function(smbstate, 0x02, arguments) if(status ~= true) then return false, result end stdnse.print_debug(3, "MSRPC: OpenHKLM() returned successfully") -- Make arguments easier to use arguments = result['arguments'] pos = 1 -- [in] uint16 *system_name, -- [in] winreg_AccessMask access_mask, -- [out,ref] policy_handle *handle pos, result['handle'] = msrpctypes.unmarshall_policy_handle(arguments, pos) pos, result['return'] = msrpctypes.unmarshall_int32(arguments, pos) if(result['return'] == nil) then return false, "Read off the end of the packet (winreg.openhklm)" end if(result['return'] ~= 0) then return false, smb.get_status_name(result['return']) .. " (winreg.openhklm)" end return true, result end ---Call the OpenHKPD function, to obtain a handle to the hidden HKEY_PERFORMANCE_DATA hive -- --@param smbstate The SMB state table --@return (status, result) If status is false, result is an error message. Otherwise, result is a table of values, the most -- useful one being 'handle', which is required to call other winreg functions. function winreg_openhkpd(smbstate) local i, j local status, result local arguments local pos, align stdnse.print_debug(2, "MSRPC: Calling OpenHKPD() [%s]", smbstate['ip']) -- [in] uint16 *system_name, arguments = msrpctypes.marshall_int16_ptr(0x1337, true) -- [in] winreg_AccessMask access_mask, arguments = arguments .. msrpctypes.marshall_winreg_AccessMask('MAXIMUM_ALLOWED_ACCESS') -- [out,ref] policy_handle *handle -- Do the call status, result = call_function(smbstate, 0x03, arguments) if(status ~= true) then return false, result end stdnse.print_debug(3, "MSRPC: OpenHKPD() returned successfully") -- Make arguments easier to use arguments = result['arguments'] pos = 1 -- [in] uint16 *system_name, -- [in] winreg_AccessMask access_mask, -- [out,ref] policy_handle *handle pos, result['handle'] = msrpctypes.unmarshall_policy_handle(arguments, pos) pos, result['return'] = msrpctypes.unmarshall_int32(arguments, pos) if(result['return'] == nil) then return false, "Read off the end of the packet (winreg.openhkpd)" end if(result['return'] ~= 0) then return false, smb.get_status_name(result['return']) .. " (winreg.openhkpd)" end return true, result end ---Call the OpenHKCU function, to obtain a handle to the HKEY_CURRENT_USER hive -- --@param smbstate The SMB state table --@return (status, result) If status is false, result is an error message. Otherwise, result is a table of values, the most -- useful one being 'handle', which is required to call other winreg functions. function winreg_openhkcu(smbstate) local i, j local status, result local arguments local pos, align stdnse.print_debug(2, "MSRPC: Calling OpenHKCU() [%s]", smbstate['ip']) -- [in] uint16 *system_name, arguments = msrpctypes.marshall_int16_ptr(0x1337, true) -- [in] winreg_AccessMask access_mask, arguments = arguments .. msrpctypes.marshall_winreg_AccessMask('MAXIMUM_ALLOWED_ACCESS') -- [out,ref] policy_handle *handle -- Do the call status, result = call_function(smbstate, 0x01, arguments) if(status ~= true) then return false, result end stdnse.print_debug(3, "MSRPC: OpenHKCU() returned successfully") -- Make arguments easier to use arguments = result['arguments'] pos = 1 -- [in] uint16 *system_name, -- [in] winreg_AccessMask access_mask, -- [out,ref] policy_handle *handle pos, result['handle'] = msrpctypes.unmarshall_policy_handle(arguments, pos) pos, result['return'] = msrpctypes.unmarshall_int32(arguments, pos) if(result['return'] == nil) then return false, "Read off the end of the packet (winreg.openhkcu)" end if(result['return'] ~= 0) then return false, smb.get_status_name(result['return']) .. " (winreg.openhkcu)" end return true, result end ---Calls the Windows registry function EnumKey, which returns a single key -- under the given handle, at the index of 'index'. -- --@param smbstate The SMB state table --@param handle A handle to hive or key. winreg_openhku provides a usable key, for example. --@param index The index of the key to return. Generally you'll start at 0 and increment until -- an error is returned. --@param name The name buffer. This should be set to the empty string; however, setting to 'nil' can have -- interesting effects on Windows 2000 (I experienced crashes). --@return (status, result) If status is false, result is an error message. Otherwise, result is a table of values, the most -- useful one being 'name', which is the name of the current key function winreg_enumkey(smbstate, handle, index, name) local i, j local status, result local arguments local pos, align stdnse.print_debug(2, "MSRPC: Calling EnumKey(%d) [%s]", index, smbstate['ip']) -- [in,ref] policy_handle *handle, arguments = msrpctypes.marshall_policy_handle(handle) -- [in] uint32 enum_index, arguments = arguments .. msrpctypes.marshall_int32(index) -- [in,out,ref] winreg_StringBuf *name, -- NOTE: if the 'name' parameter here is set to 'nil', the service on a fully patched Windows 2000 system -- may crash. arguments = arguments .. msrpctypes.marshall_winreg_StringBuf({name=""}, 520) -- [in,out,unique] winreg_StringBuf *keyclass, arguments = arguments .. msrpctypes.marshall_winreg_StringBuf_ptr({name=nil}) -- [in,out,unique] NTTIME *last_changed_time arguments = arguments .. msrpctypes.marshall_NTTIME_ptr(0) -- Do the call status, result = call_function(smbstate, 0x09, arguments) if(status ~= true) then return false, result end stdnse.print_debug(3, "MSRPC: EnumKey() returned successfully") -- Make arguments easier to use arguments = result['arguments'] local referent_id pos = 1 -- [in,ref] policy_handle *handle, -- [in] uint32 enum_index, -- [in,out,ref] winreg_StringBuf *name, pos, result['name'] = msrpctypes.unmarshall_winreg_StringBuf(arguments, pos) -- [in,out,unique] winreg_StringBuf *keyclass, pos, result['keyclass'] = msrpctypes.unmarshall_winreg_StringBuf_ptr(arguments, pos) -- [in,out,unique] NTTIME *last_changed_time pos, result['changed_time'] = msrpctypes.unmarshall_NTTIME_ptr(arguments, pos) result['changed_date'] = os.date("%Y-%m-%d %H:%M:%S", result['changed_time']) pos, result['return'] = msrpctypes.unmarshall_int32(arguments, pos) if(result['return'] == nil) then return false, "Read off the end of the packet (winreg.enumkey)" end if(result['return'] ~= 0) then return false, smb.get_status_name(result['return']) .. " (winreg.enumkey)" end return true, result end --- Calls the function OpenKey, which obtains a handle to a named key. -- --@param smbstate The SMB state table --@param handle A handle to hive or key. winreg_openhku provides a usable key, for example. --@param keyname The name of the key to open. --@return (status, result) If status is false, result is an error message. Otherwise, result is a table of values, the most -- useful one being 'handle', which is a handle to the newly opened key. function winreg_openkey(smbstate, handle, keyname) local i, j local status, result local arguments local pos, align stdnse.print_debug(2, "MSRPC: Calling OpenKey(%s) [%s]", keyname, smbstate['ip']) -- [in,ref] policy_handle *parent_handle, arguments = msrpctypes.marshall_policy_handle(handle) -- [in] winreg_String keyname, arguments = arguments .. msrpctypes.marshall_winreg_String({name=keyname}) -- [in] uint32 unknown, arguments = arguments .. msrpctypes.marshall_int32(0) -- [in] winreg_AccessMask access_mask, arguments = arguments .. msrpctypes.marshall_winreg_AccessMask('MAXIMUM_ALLOWED_ACCESS') -- [out,ref] policy_handle *handle -- Do the call status, result = call_function(smbstate, 0x0F, arguments) if(status ~= true) then return false, result end stdnse.print_debug(3, "MSRPC: OpenKey() returned successfully") -- Make arguments easier to use arguments = result['arguments'] pos = 1 -- [in,ref] policy_handle *parent_handle, -- [in] winreg_String keyname, -- [in] uint32 unknown, -- [in] winreg_AccessMask access_mask, -- [out,ref] policy_handle *handle pos, result['handle'] = msrpctypes.unmarshall_policy_handle(arguments, pos) pos, result['return'] = msrpctypes.unmarshall_int32(arguments, pos) if(result['return'] == nil) then return false, "Read off the end of the packet (winreg.openkey)" end if(result['return'] ~= 0) then return false, smb.get_status_name(result['return']) .. " (winreg.openkey)" end return true, result end --- Calls the function QueryInfoKey, which obtains information about an opened key. -- --@param smbstate The SMB state table --@param handle A handle to the key that's being queried. --@return (status, result) If status is false, result is an error message. Otherwise, result is a table of values, the most -- useful one, at least for me, being 'last_changed_time'/'last_changed_date', which are the date and time that the -- key was changed. function winreg_queryinfokey(smbstate, handle) local i, j local status, result local arguments local pos, align stdnse.print_debug(2, "MSRPC: Calling QueryInfoKey() [%s]", smbstate['ip']) -- [in,ref] policy_handle *handle, arguments = msrpctypes.marshall_policy_handle(handle) -- [in,out,ref] winreg_String *classname, arguments = arguments .. msrpctypes.marshall_winreg_String({name=""}, 2048) -- [out,ref] uint32 *num_subkeys, -- [out,ref] uint32 *max_subkeylen, -- [out,ref] uint32 *max_subkeysize, -- [out,ref] uint32 *num_values, -- [out,ref] uint32 *max_valnamelen, -- [out,ref] uint32 *max_valbufsize, -- [out,ref] uint32 *secdescsize, -- [out,ref] NTTIME *last_changed_time -- Do the call status, result = call_function(smbstate, 0x10, arguments) if(status ~= true) then return false, result end stdnse.print_debug(3, "MSRPC: QueryInfoKey() returned successfully") -- Make arguments easier to use arguments = result['arguments'] pos = 1 -- [in,ref] policy_handle *handle, -- [in,out,ref] winreg_String *classname, pos, result['classname'] = msrpctypes.unmarshall_winreg_String(arguments, pos) -- [out,ref] uint32 *num_subkeys, pos, result['subkeys'] = msrpctypes.unmarshall_int32(arguments, pos) -- [out,ref] uint32 *max_subkeylen, pos, result['subkeylen'] = msrpctypes.unmarshall_int32(arguments, pos) -- [out,ref] uint32 *max_subkeysize, pos, result['subkeysize'] = msrpctypes.unmarshall_int32(arguments, pos) -- [out,ref] uint32 *num_values, pos, result['num_values'] = msrpctypes.unmarshall_int32(arguments, pos) -- [out,ref] uint32 *max_valnamelen, pos, result['max_valnamelen'] = msrpctypes.unmarshall_int32(arguments, pos) -- [out,ref] uint32 *max_valbufsize, pos, result['max_valbufsize'] = msrpctypes.unmarshall_int32(arguments, pos) -- [out,ref] uint32 *secdescsize, pos, result['secdescsize'] = msrpctypes.unmarshall_int32(arguments, pos) -- [out,ref] NTTIME *last_changed_time pos, result['last_changed_time'] = msrpctypes.unmarshall_NTTIME(arguments, pos) result['last_changed_date'] = os.date("%Y-%m-%d %H:%M:%S", result['last_changed_time']) pos, result['return'] = msrpctypes.unmarshall_int32(arguments, pos) if(result['return'] == nil) then return false, "Read off the end of the packet (winreg.queryinfokey)" end if(result['return'] ~= 0) then return false, smb.get_status_name(result['return']) .. " (winreg.queryinfokey)" end return true, result end --- Calls the function QueryValue, which returns the value of the requested key. -- --@param smbstate The SMB state table --@param handle A handle to the key that's being queried. --@param value The value we're looking for. --@return (status, result) If status is false, result is an error message. Otherwise, result is a table of values, the most -- useful one, at least for me, being 'last_changed_time'/'last_changed_date', which are the date and time that the -- key was changed. function winreg_queryvalue(smbstate, handle, value) local i, j local status, result local arguments local pos, align stdnse.print_debug(2, "MSRPC: Calling QueryValue(%s) [%s]", value, smbstate['ip']) -- [in,ref] policy_handle *handle, arguments = msrpctypes.marshall_policy_handle(handle) -- [in] winreg_String value_name, arguments = arguments .. msrpctypes.marshall_winreg_String({name=value}) -- [in,out] winreg_Type *type, arguments = arguments .. msrpctypes.marshall_winreg_Type_ptr("REG_NONE") -- [in,out,size_is(*size),length_is(*length)] uint8 *data, arguments = arguments .. msrpctypes.marshall_int8_array_ptr("", 1000000) -- [in,out] uint32 *size, arguments = arguments .. msrpctypes.marshall_int32_ptr(1000000) -- [in,out] uint32 *length arguments = arguments .. msrpctypes.marshall_int32_ptr(0) -- Do the call status, result = call_function(smbstate, 0x11, arguments) if(status ~= true) then return false, result end stdnse.print_debug(3, "MSRPC: QueryValue() returned successfully") local length, referent_id -- Make arguments easier to use arguments = result['arguments'] pos = 1 -- [in,ref] policy_handle *handle, -- [in] winreg_String value_name, -- [in,out] winreg_Type *type, pos, result['type'] = msrpctypes.unmarshall_winreg_Type_ptr(arguments, pos) -- [in,out,size_is(*size),length_is(*length)] uint8 *data, pos, result['data'] = msrpctypes.unmarshall_int8_array_ptr(arguments, pos) -- Format the type properly and put it in "value" if(result['data'] ~= nil) then local _ if(result['type'] == "REG_DWORD") then _, result['value'] = bin.unpack("CloseKey, which closes an opened handle. Strictly speaking, this doesn't have to be called (Windows -- will close the key for you), but it's good manners to clean up after yourself. -- --@param smbstate The SMB state table --@param handle the handle to be closed. --@return (status, result) If status is false, result is an error message. Otherwise, result is a table of values, none of -- which are especially useful. function winreg_closekey(smbstate, handle) local i, j local status, result local arguments local pos, align stdnse.print_debug(2, "MSRPC: Calling CloseKey() [%s]", smbstate['ip']) -- [in,out,ref] policy_handle *handle arguments = msrpctypes.marshall_policy_handle(handle) -- Do the call status, result = call_function(smbstate, 0x05, arguments) if(status ~= true) then return false, result end stdnse.print_debug(3, "MSRPC: CloseKey() returned successfully") -- Make arguments easier to use arguments = result['arguments'] pos = 1 -- [in,out,ref] policy_handle *handle pos, result['handle'] = msrpctypes.unmarshall_policy_handle(arguments, pos) pos, result['return'] = msrpctypes.unmarshall_int32(arguments, pos) if(result['return'] == nil) then return false, "Read off the end of the packet (winreg.closekey)" end if(result['return'] ~= 0) then return false, smb.get_status_name(result['return']) .. " (winreg.closekey)" end return true, result end --- Calls the function OpenSCManagerA, which gets a handle to the service manager. Should be closed with -- CloseServiceHandle when finished. -- --@param smbstate The SMB state table --@param machinename The name or IP of the machine. --@return (status, result) If status is false, result is an error message. Otherwise, result is a table of values -- representing the "out" parameters. function svcctl_openscmanagera(smbstate, machinename) local i, j local status, result local arguments local pos, align stdnse.print_debug(2, "MSRPC: Calling OpenSCManagerA() [%s]", smbstate['ip']) -- [in] [string,charset(UTF16)] uint16 *MachineName, arguments = msrpctypes.marshall_ascii_ptr("\\\\" .. machinename) -- [in] [string,charset(UTF16)] uint16 *DatabaseName, arguments = arguments .. msrpctypes.marshall_ascii_ptr(nil) -- [in] uint32 access_mask, -- arguments = arguments .. msrpctypes.marshall_int32(0x000f003f) arguments = arguments .. msrpctypes.marshall_int32(0x00000002) -- [out,ref] policy_handle *handle -- Do the call status, result = call_function(smbstate, 0x1b, arguments) if(status ~= true) then return false, result end stdnse.print_debug(3, "MSRPC: OpenSCManagerA() returned successfully") -- Make arguments easier to use arguments = result['arguments'] pos = 1 -- [in] [string,charset(UTF16)] uint16 *MachineName, -- [in] [string,charset(UTF16)] uint16 *DatabaseName, -- [in] uint32 access_mask, -- [out,ref] policy_handle *handle pos, result['handle'] = msrpctypes.unmarshall_policy_handle(arguments, pos) pos, result['return'] = msrpctypes.unmarshall_int32(arguments, pos) if(result['return'] == nil) then return false, "Read off the end of the packet (svcctl.openscmanagera)" end if(result['return'] ~= 0) then return false, smb.get_status_name(result['return']) .. " (svcctl.openscmanagera)" end return true, result end --- Calls the function OpenSCManagerW, which gets a handle to the service manager. Should be closed with -- CloseServiceHandle when finished. -- --@param smbstate The SMB state table --@param machinename The name or IP of the machine. --@return (status, result) If status is false, result is an error message. Otherwise, result is a table of values -- representing the "out" parameters. function svcctl_openscmanagerw(smbstate, machinename) local i, j local status, result local arguments local pos, align -- if(1 == 1) then -- return svcctl_openscmanagera(smbstate, machinename) -- end stdnse.print_debug(2, "MSRPC: Calling OpenSCManagerW() [%s]", smbstate['ip']) -- [in] [string,charset(UTF16)] uint16 *MachineName, arguments = msrpctypes.marshall_unicode_ptr("\\\\" .. machinename, true) -- [in] [string,charset(UTF16)] uint16 *DatabaseName, arguments = arguments .. msrpctypes.marshall_unicode_ptr(nil, true) -- [in] uint32 access_mask, -- arguments = arguments .. msrpctypes.marshall_int32(0x000f003f) arguments = arguments .. msrpctypes.marshall_int32(0x02000000) -- [out,ref] policy_handle *handle -- Do the call status, result = call_function(smbstate, 0x0f, arguments) if(status ~= true) then return false, result end stdnse.print_debug(3, "MSRPC: OpenSCManagerW() returned successfully") -- Make arguments easier to use arguments = result['arguments'] pos = 1 -- [in] [string,charset(UTF16)] uint16 *MachineName, -- [in] [string,charset(UTF16)] uint16 *DatabaseName, -- [in] uint32 access_mask, -- [out,ref] policy_handle *handle pos, result['handle'] = msrpctypes.unmarshall_policy_handle(arguments, pos) pos, result['return'] = msrpctypes.unmarshall_int32(arguments, pos) if(result['return'] == nil) then return false, "Read off the end of the packet (svcctl.openscmanagerw)" end if(result['return'] ~= 0) then return false, smb.get_status_name(result['return']) .. " (svcctl.openscmanagerw)" end return true, result end --- Calls the function CloseServiceHandle, which releases a handle. -- --@param smbstate The SMB state table --@param handle The handle to be closed. --@return (status, result) If status is false, result is an error message. Otherwise, result is a table of values -- representing the "out" parameters. function svcctl_closeservicehandle(smbstate, handle) local i, j local status, result local arguments local pos, align stdnse.print_debug(2, "MSRPC: Calling CloseServiceHandle() [%s]", smbstate['ip']) -- [in,out,ref] policy_handle *handle arguments = msrpctypes.marshall_policy_handle(handle) -- Do the call status, result = call_function(smbstate, 0x00, arguments) if(status ~= true) then return false, result end stdnse.print_debug(3, "MSRPC: OpenSCManagerA() returned successfully") -- Make arguments easier to use arguments = result['arguments'] pos = 1 -- [in,out,ref] policy_handle *handle pos, result['handle'] = msrpctypes.unmarshall_policy_handle(arguments, pos) pos, result['return'] = msrpctypes.unmarshall_int32(arguments, pos) if(result['return'] == nil) then return false, "Read off the end of the packet (svcctl.closeservicehandle)" end if(result['return'] ~= 0) then return false, smb.get_status_name(result['return']) .. " (svcctl.closeservicehandle)" end return true, result end --- Calls the function CreateServiceW, which creates a service on the remote machine. This should -- be deleted with DeleteService when finished. -- --@param smbstate The SMB state table --@param handle The handle created by OpenSCManagerW --@return (status, result) If status is false, result is an error message. Otherwise, result is a table of values -- representing the "out" parameters. function svcctl_createservicew(smbstate, handle, service_name, display_name, path) local i, j local status, result local arguments local pos, align stdnse.print_debug(2, "MSRPC: Calling CreateServiceW() [%s]", smbstate['ip']) -- [in,ref] policy_handle *scmanager_handle, arguments = msrpctypes.marshall_policy_handle(handle) -- [in] [string,charset(UTF16)] uint16 ServiceName[], arguments = arguments .. msrpctypes.marshall_unicode(service_name, true) -- [in] [string,charset(UTF16)] uint16 *DisplayName, arguments = arguments .. msrpctypes.marshall_unicode_ptr(display_name, true) -- [in] uint32 desired_access, arguments = arguments .. msrpctypes.marshall_int32(0x000f01ff) -- Access: Max -- [in] uint32 type, arguments = arguments .. msrpctypes.marshall_int32(0x00000010) -- Type: own process -- [in] uint32 start_type, arguments = arguments .. msrpctypes.marshall_int32(0x00000003) -- Start: Demand -- [in] uint32 error_control, arguments = arguments .. msrpctypes.marshall_int32(0x00000000) -- Error: Ignore -- [in] [string,charset(UTF16)] uint16 binary_path[], arguments = arguments .. msrpctypes.marshall_unicode(path, true) -- [in] [string,charset(UTF16)] uint16 *LoadOrderGroupKey, arguments = arguments .. msrpctypes.marshall_unicode_ptr(nil) -- [in,out] uint32 *TagId, arguments = arguments .. msrpctypes.marshall_int32_ptr(nil) -- [in,size_is(dependencies_size)] uint8 *dependencies, arguments = arguments .. msrpctypes.marshall_int8_ptr(nil) -- [in] uint32 dependencies_size, arguments = arguments .. msrpctypes.marshall_int32(0) -- [in] [string,charset(UTF16)] uint16 *service_start_name, arguments = arguments .. msrpctypes.marshall_unicode_ptr(nil) -- [in,size_is(password_size)] uint8 *password, arguments = arguments .. msrpctypes.marshall_int8_ptr(nil) -- [in] uint32 password_size, arguments = arguments .. msrpctypes.marshall_int32(0) -- [out,ref] policy_handle *handle -- Do the call status, result = call_function(smbstate, 0x0c, arguments) if(status ~= true) then return false, result end stdnse.print_debug(3, "MSRPC: CreateServiceW() returned successfully") -- Make arguments easier to use arguments = result['arguments'] pos = 1 -- [in,ref] policy_handle *scmanager_handle, -- [in] [string,charset(UTF16)] uint16 ServiceName[], -- [in] [string,charset(UTF16)] uint16 *DisplayName, -- [in] uint32 desired_access, -- [in] uint32 type, -- [in] uint32 start_type, -- [in] uint32 error_control, -- [in] [string,charset(UTF16)] uint16 binary_path[], -- [in] [string,charset(UTF16)] uint16 *LoadOrderGroupKey, -- [in,out] uint32 *TagId, pos, result['TagId'] = msrpctypes.unmarshall_int32_ptr(arguments, pos) -- [in,size_is(dependencies_size)] uint8 *dependencies, -- [in] uint32 dependencies_size, -- [in] [string,charset(UTF16)] uint16 *service_start_name, -- [in,size_is(password_size)] uint8 *password, -- [in] uint32 password_size, -- [out,ref] policy_handle *handle pos, result['handle'] = msrpctypes.unmarshall_policy_handle(arguments, pos) pos, result['return'] = msrpctypes.unmarshall_int32(arguments, pos) if(result['return'] == nil) then return false, "Read off the end of the packet (svcctl.createservicew)" end if(result['return'] ~= 0) then return false, smb.get_status_name(result['return']) .. " (svcctl.createservicew)" end return true, result end --- Calls the function DeleteService, which deletes a service on the remote machine. This service -- has to opened with OpenServiceW or similar functions. -- --@param smbstate The SMB state table. --@param handle The handle to delete, opened with OpenServiceW or similar. --@return (status, result) If status is false, result is an error message. Otherwise, result is a table of values -- representing the "out" parameters. function svcctl_deleteservice(smbstate, handle) local i, j local status, result local arguments local pos, align stdnse.print_debug(2, "MSRPC: Calling DeleteService() [%s]", smbstate['ip']) -- [in,ref] policy_handle *handle arguments = msrpctypes.marshall_policy_handle(handle) -- Do the call status, result = call_function(smbstate, 0x02, arguments) if(status ~= true) then return false, result end stdnse.print_debug(3, "MSRPC: DeleteService() returned successfully") -- Make arguments easier to use arguments = result['arguments'] pos = 1 -- [in,ref] policy_handle *handle pos, result['return'] = msrpctypes.unmarshall_int32(arguments, pos) if(result['return'] == nil) then return false, "Read off the end of the packet (svcctl.deleteservice)" end if(result['return'] ~= 0) then return false, smb.get_status_name(result['return']) .. " (svcctl.deleteservice)" end return true, result end --- Calls the function OpenServiceW, which gets a handle to the service. Should be closed with -- CloseServiceHandle when finished. -- --@param smbstate The SMB state table. --@param handle A handle to the policy manager, opened with OpenSCManagerW or similar. --@param name The name of the service. --@return (status, result) If status is false, result is an error message. Otherwise, result is a table of values -- representing the "out" parameters. function svcctl_openservicew(smbstate, handle, name) local i, j local status, result local arguments local pos, align stdnse.print_debug(2, "MSRPC: Calling OpenServiceW() [%s]", smbstate['ip']) -- [in,ref] policy_handle *scmanager_handle, arguments = msrpctypes.marshall_policy_handle(handle) -- [in] [string,charset(UTF16)] uint16 ServiceName[], arguments = arguments .. msrpctypes.marshall_unicode(name, true) -- [in] uint32 access_mask, arguments = arguments .. msrpctypes.marshall_int32(0x000f01ff) -- [out,ref] policy_handle *handle -- Do the call status, result = call_function(smbstate, 0x10, arguments) if(status ~= true) then return false, result end stdnse.print_debug(3, "MSRPC: OpenServiceW() returned successfully") -- Make arguments easier to use arguments = result['arguments'] pos = 1 -- [in,ref] policy_handle *scmanager_handle, -- [in] [string,charset(UTF16)] uint16 ServiceName[], -- [in] uint32 access_mask, -- [out,ref] policy_handle *handle pos, result['handle'] = msrpctypes.unmarshall_policy_handle(arguments, pos) pos, result['return'] = msrpctypes.unmarshall_int32(arguments, pos) if(result['return'] == nil) then return false, "Read off the end of the packet (svcctl.openservicew)" end if(result['return'] ~= 0) then return false, smb.get_status_name(result['return']) .. " (svcctl.openservicew)" end return true, result end --- Calls the function StartServiceW, which starts a service. Requires a handle -- created by OpenServiceW. -- --@param smbstate The SMB state table. --@param handle The handle, opened by OpenServiceW. --@param args An array of strings representing the arguments. --@return (status, result) If status is false, result is an error message. Otherwise, result is a table of values -- representing the "out" parameters. function svcctl_startservicew(smbstate, handle, args) local i, j local status, result local arguments local pos, align stdnse.print_debug(2, "MSRPC: Calling StartServiceW() [%s]", smbstate['ip']) -- [in,ref] policy_handle *handle, arguments = msrpctypes.marshall_policy_handle(handle) -- [in] uint32 NumArgs, if(args == nil) then arguments = arguments .. msrpctypes.marshall_int32(0) else arguments = arguments .. msrpctypes.marshall_int32(#args) end -- [in/*FIXME:,length_is(NumArgs)*/] [string,charset(UTF16)] uint16 *Arguments arguments = arguments .. msrpctypes.marshall_unicode_array_ptr(args, true) -- Do the call status, result = call_function(smbstate, 0x13, arguments) if(status ~= true) then return false, result end stdnse.print_debug(3, "MSRPC: StartServiceW() returned successfully") -- Make arguments easier to use arguments = result['arguments'] pos = 1 -- [in,ref] policy_handle *handle, -- [in] uint32 NumArgs, -- [in/*FIXME:,length_is(NumArgs)*/] [string,charset(UTF16)] uint16 *Arguments pos, result['return'] = msrpctypes.unmarshall_int32(arguments, pos) if(result['return'] == nil) then return false, "Read off the end of the packet (svcctl.startservicew)" end if(result['return'] ~= 0) then return false, smb.get_status_name(result['return']) .. " (svcctl.startservicew)" end return true, result end --- Calls the function ControlService, which can send various commands to the service. -- --@param smbstate The SMB state table. --@param handle The handle, opened by OpenServiceW. --@param control The command to send. See svcctl_ControlCode in msrpctypes.lua. --@return (status, result) If status is false, result is an error message. Otherwise, result is a table of values -- representing the "out" parameters. function svcctl_controlservice(smbstate, handle, control) local i, j local status, result local arguments local pos, align stdnse.print_debug(2, "MSRPC: Calling ControlService() [%s]", smbstate['ip']) -- [in,ref] policy_handle *handle, arguments = msrpctypes.marshall_policy_handle(handle) -- [in] uint32 control, arguments = arguments .. msrpctypes.marshall_svcctl_ControlCode(control) -- [out,ref] SERVICE_STATUS *service_status -- Do the call status, result = call_function(smbstate, 0x01, arguments) if(status ~= true) then return false, result end stdnse.print_debug(3, "MSRPC: ControlService() returned successfully") -- Make arguments easier to use arguments = result['arguments'] pos = 1 -- [in,ref] policy_handle *handle, -- [in] uint32 control, -- [out,ref] SERVICE_STATUS *service_status pos, result['service_status'] = msrpctypes.unmarshall_SERVICE_STATUS(arguments, pos) pos, result['return'] = msrpctypes.unmarshall_int32(arguments, pos) if(result['return'] == nil) then return false, "Read off the end of the packet (svcctl.controlservice)" end if(result['return'] ~= 0) then return false, smb.get_status_name(result['return']) .. " (svcctl.controlservice)" end return true, result end --- Calls the function QueryServiceStatus, which gets the state information about the service. -- --@param smbstate The SMB state table. --@param handle The handle, opened by OpenServiceW. --@return (status, result) If status is false, result is an error message. Otherwise, result is a table of values -- representing the "out" parameters. function svcctl_queryservicestatus(smbstate, handle, control) local i, j local status, result local arguments local pos, align stdnse.print_debug(2, "MSRPC: Calling QueryServiceStatus() [%s]", smbstate['ip']) -- [in,ref] policy_handle *handle, arguments = msrpctypes.marshall_policy_handle(handle) -- [out,ref] SERVICE_STATUS *service_status -- Do the call status, result = call_function(smbstate, 0x06, arguments) if(status ~= true) then return false, result end stdnse.print_debug(3, "MSRPC: QueryServiceStatus() returned successfully") -- Make arguments easier to use arguments = result['arguments'] pos = 1 -- [in,ref] policy_handle *handle, -- [out,ref] SERVICE_STATUS *service_status pos, result['service_status'] = msrpctypes.unmarshall_SERVICE_STATUS(arguments, pos) pos, result['return'] = msrpctypes.unmarshall_int32(arguments, pos) if(result['return'] == nil) then return false, "Read off the end of the packet (svcctl.queryservicestatus)" end if(result['return'] ~= 0) then return false, smb.get_status_name(result['return']) .. " (svcctl.queryservicestatus)" end return true, result end ---Calls the function JobAdd, which schedules a process to be run -- on the remote machine. -- -- This requires administrator privileges to run, and the command itself runs -- as SYSTEM. --@param smbstate The SMB state table. --@param server The IP or Hostname of the server (seems to be ignored but it's -- a good idea to have it) --@param command The command to run on the remote machine. The appropriate -- file(s) already have to be there, and this should be a full -- path. --@param time [optional] The time at which to run the command. Default: 5 -- seconds from when the user logged in. function atsvc_jobadd(smbstate, server, command, time) local i, j local status, result local arguments local pos, align -- Set up the time if(time == nil) then -- TODO end stdnse.print_debug(2, "MSRPC: Calling AddJob(%s) [%s]", command, smbstate['ip']) -- [in,unique,string,charset(UTF16)] uint16 *servername, arguments = msrpctypes.marshall_unicode_ptr(server, true) -- [in] atsvc_JobInfo *job_info, arguments = arguments .. msrpctypes.marshall_atsvc_JobInfo(command, time) -- [out,ref] uint32 *job_id -- Do the call status, result = call_function(smbstate, 0x00, arguments) if(status ~= true) then return false, result end stdnse.print_debug(3, "MSRPC: AddJob() returned successfully") -- Make arguments easier to use arguments = result['arguments'] pos = 1 -- [in,unique,string,charset(UTF16)] uint16 *servername, -- [in] atsvc_JobInfo *job_info, -- [out,ref] uint32 *job_id pos, result['job_id'] = msrpctypes.unmarshall_int32(arguments, pos) pos, result['return'] = msrpctypes.unmarshall_int32(arguments, pos) if(result['return'] == nil) then return false, "Read off the end of the packet (atsvc.addjob())" end if(result['return'] ~= 0) then return false, smb.get_status_name(result['return']) .. " (atsvc.addjob())" end return true, result end ---Attempt to enumerate users using SAMR functions. -- --@param host The host object. --@return (status, result) If status is false, result is an error message. Otherwise, result -- is an array of tables, each of which contain the following fields: -- * name -- * fullname -- * description -- * rid -- * domain -- * typestr -- * source -- * flags[] function samr_enum_users(host) local i, j local smbstate local bind_result, connect4_result, enumdomains_result local connect_handle local status, smbstate local response = {} -- Create the SMB session status, smbstate = start_smb(host, SAMR_PATH, true) if(status == false) then return false, smbstate end -- Bind to SAMR service status, bind_result = bind(smbstate, SAMR_UUID, SAMR_VERSION, nil) if(status == false) then stop_smb(smbstate) return false, bind_result end -- Call connect4() status, connect4_result = samr_connect4(smbstate, host.ip) if(status == false) then stop_smb(smbstate) return false, connect4_result end -- Save the connect_handle connect_handle = connect4_result['connect_handle'] -- Call EnumDomains() status, enumdomains_result = samr_enumdomains(smbstate, connect_handle) if(status == false) then stop_smb(smbstate) return false, enumdomains_result end -- If no domains were returned, go back with an error if(#enumdomains_result['sam']['entries'] == 0) then stop_smb(smbstate) return false, "Couldn't find any domains" end -- Now, loop through the domains and find the users for i = 1, #enumdomains_result['sam']['entries'], 1 do local domain = enumdomains_result['sam']['entries'][i]['name'] -- We don't care about the 'builtin' domain, in all my tests it's empty if(domain ~= 'Builtin') then -- Call LookupDomain() local status, lookupdomain_result = samr_lookupdomain(smbstate, connect_handle, domain) if(status == false) then stop_smb(smbstate) return false, lookupdomain_result end -- Save the sid local sid = lookupdomain_result['sid'] -- Call OpenDomain() local status, opendomain_result = samr_opendomain(smbstate, connect_handle, sid) if(status == false) then stop_smb(smbstate) return false, opendomain_result end -- Save the domain handle local domain_handle = opendomain_result['domain_handle'] -- Loop as long as we're getting valid results j = 0 repeat -- Call QueryDisplayInfo() local status, querydisplayinfo_result = samr_querydisplayinfo(smbstate, domain_handle, j, SAMR_GROUPSIZE) if(status == false) then stop_smb(smbstate) return false, querydisplayinfo_result end -- Save the response if(querydisplayinfo_result['info'] ~= nil and querydisplayinfo_result['info']['entries'] ~= nil) then local k for k = 1, #querydisplayinfo_result['info']['entries'], 1 do local array = {} local l -- The reason these are all indexed from '1' is because we request names one at a time. array['name'] = querydisplayinfo_result['info']['entries'][k]['account_name'] array['fullname'] = querydisplayinfo_result['info']['entries'][k]['full_name'] array['description'] = querydisplayinfo_result['info']['entries'][k]['description'] array['rid'] = querydisplayinfo_result['info']['entries'][k]['rid'] array['domain'] = domain array['type'] = 'SID_NAME_USER' array['typestr'] = 'User' array['source'] = 'SAMR Enumeration' array['flags'] = querydisplayinfo_result['info']['entries'][k]['acct_flags'] -- Convert each element in the 'flags' array into the equivalent string for l = 1, #array['flags'], 1 do array['flags'][l] = samr_AcctFlags_tostr(array['flags'][l]) end -- Add it to the array response[#response + 1] = array end end j = j + SAMR_GROUPSIZE until querydisplayinfo_result['return'] == 0 -- Close the domain handle samr_close(smbstate, domain_handle) end -- Checking for 'builtin' end -- Domain loop -- Close the connect handle samr_close(smbstate, connect_handle) -- Stop the SAMR SMB stop_smb(smbstate) return true, response end function samr_enum_groups(host) local i, j stdnse.print_debug(1, "MSRPC: Attempting to enumerate groups on %s", host.ip) -- Create the SMB session local status, smbstate = start_smb(host, SAMR_PATH, true) if(status == false) then return false, smbstate end -- Bind to SAMR service local status, bind_result = bind(smbstate, SAMR_UUID, SAMR_VERSION, nil) if(status == false) then stop_smb(smbstate) return false, bind_result end -- Call connect4() local status, connect4_result = samr_connect4(smbstate, host.ip) if(status == false) then stop_smb(smbstate) return false, connect4_result end -- Save the connect_handle local connect_handle = connect4_result['connect_handle'] -- Call EnumDomains() local status, enumdomains_result = samr_enumdomains(smbstate, connect_handle) if(status == false) then stop_smb(smbstate) return false, enumdomains_result end -- If no domains were returned, go back with an error if(#enumdomains_result['sam']['entries'] == 0) then stop_smb(smbstate) return false, "Couldn't find any domains" end -- Now, loop through the domains and find the groups local domains = {} for _, domain in ipairs(enumdomains_result['sam']['entries']) do -- Get a handy domain name domain = domain['name'] domains[domain] = {} -- Call LookupDomain() local status, lookupdomain_result = samr_lookupdomain(smbstate, connect_handle, domain) if(status == false) then stop_smb(smbstate) return false, lookupdomain_result end -- Save the sid local domain_sid = lookupdomain_result['sid'] -- Call OpenDomain() local status, opendomain_result = samr_opendomain(smbstate, connect_handle, domain_sid) if(status == false) then stop_smb(smbstate) return false, opendomain_result end -- Save the domain handle local domain_handle = opendomain_result['domain_handle'] -- Get a list of groups local status, enumaliases_result = samr_enumdomainaliases(smbstate, domain_handle) if(status == false) then stop_smb(smbstate) return false, "Couldn't enumerate groups: " .. enumaliases_result end -- If it returned a nil array if(enumaliases_result['sam'] == nil or enumaliases_result['sam']['entries'] == nil) then return false, "ERROR: No groups returned by samr_EnumDomainAliases()" end -- Print some output stdnse.print_debug(1, "MSRPC: Found %d groups in %s", #enumaliases_result['sam']['entries'], domain) -- Record the results local group_rids = {} for _, group in ipairs(enumaliases_result['sam']['entries']) do -- The RID local group_rid = group['idx'] -- Keep a list of just RIDs, for easier lookup after table.insert(group_rids, group_rid) -- Save the output, this is what will be returned domains[domain][group_rid] = {} domains[domain][group_rid]['name'] = group['name'] end -- Loop over group entries for _, group_rid in ipairs(group_rids) do -- Get a handle to the alias local status, openalias_result = samr_openalias(smbstate, domain_handle, group_rid) if(not(status)) then stop_smb(smbstate) return false, "Couldn't open handle to group: " .. openalias_result end local group_handle = openalias_result['alias_handle'] -- Get the members of the group local status, getmembers_result = samr_getmembersinalias(smbstate, group_handle) if(not(status)) then stop_smb(smbstate) return false, "Couldn't get members in group: " .. getmembers_result end -- Save the SIDs local member_sids = {} if(getmembers_result and getmembers_result.sids and getmembers_result.sids.sids) then -- Set the list of member_sids member_sids = getmembers_result.sids.sids end -- Print some output stdnse.print_debug(1, "MSRPC: Adding group '%s' (RID: %d) with %d members", domains[domain][group_rid]['name'], group_rid, #member_sids) -- Save the output domains[domain][group_rid]['member_sids'] = member_sids -- Close the group samr_close(smbstate, group_handle) end -- Loop over group RIDs -- Close the domain handle samr_close(smbstate, domain_handle) end -- Domain loop -- Close the connect handle samr_close(smbstate, connect_handle) -- Stop the SAMR SMB stop_smb(smbstate) -- Now, we need a handle to LSA (in order to convert the RIDs to users -- Create the SMB session local status, smbstate = start_smb(host, LSA_PATH, true) if(status == false) then return false, smbstate end -- Bind to LSA service local status, bind_result = bind(smbstate, LSA_UUID, LSA_VERSION, nil) if(status == false) then stop_smb(smbstate) return false, bind_result end -- Open the LSA policy local status, openpolicy2_result = lsa_openpolicy2(smbstate, host.ip) if(status == false) then stop_smb(smbstate) return false, openpolicy2_result end -- Loop through the domains for domain, domain_data in pairs(domains) do for group_rid, group in pairs(domain_data) do -- Look up the SIDs local status, lookupsids2_result = lsa_lookupsids2(smbstate, openpolicy2_result['policy_handle'], group['member_sids']) if(status == false) then stop_smb(smbstate) return false, "Error looking up RIDs: " .. lookupsids2_result end if(lookupsids2_result and lookupsids2_result.names and lookupsids2_result.names.names and (#lookupsids2_result.names.names > 0)) then local members = {} for _, resolved_name in ipairs(lookupsids2_result.names.names) do if(resolved_name.sid_type == "SID_NAME_USER") then table.insert(members, resolved_name.name) end end domains[domain][group_rid]['members'] = members else domains[domain][group_rid]['members'] = {} end end end -- Close the handle lsa_close(smbstate, openpolicy2_result['policy_handle']) stop_smb(smbstate) return true, domains end ---Attempt to enumerate users using LSA functions. -- --@param host The host object. --@return status, result -- if status is false, result is an error message; otherwise, result is -- an array of tables, each containing the following elements: -- * name -- * rid -- * domain -- * typestr -- * source function lsa_enum_users(host) local smbstate local response = {} local status, smbstate, bind_result, openpolicy2_result, lookupnames2_result, lookupsids2_result -- Create the SMB session status, smbstate = start_smb(host, LSA_PATH, true) if(status == false) then return false, smbstate end -- Bind to LSA service status, bind_result = bind(smbstate, LSA_UUID, LSA_VERSION, nil) if(status == false) then stop_smb(smbstate) return false, bind_result end -- Open the LSA policy status, openpolicy2_result = lsa_openpolicy2(smbstate, host.ip) if(status == false) then stop_smb(smbstate) return false, openpolicy2_result end -- Start with some common names, as well as the name returned by the negotiate call -- Vista doesn't like a 'null' after the server name, so fix that (TODO: the way I strip the null here feels hackish, is there a better way?) local names = {"administrator", "guest", "test"} -- These aren't always sent back (especially with 'extended security') if(smbstate['domain'] ~= nil) then names[#names + 1] = smbstate['domain'] end if(smbstate['server'] ~= nil) then names[#names + 1] = string.sub(smbstate['server'], 1, #smbstate['server'] - 1) end -- Get the server's name from nbstat local result, server_name = netbios.get_server_name(host.ip) if(result == true) then names[#names + 1] = server_name end -- Get the logged in user from nbstat local result, user_name = netbios.get_user_name(host.ip) if(result == true) then names[#names + 1] = user_name end -- Look up the names, if any are valid than the server's SID will be returned status, lookupnames2_result = lsa_lookupnames2(smbstate, openpolicy2_result['policy_handle'], names) if(status == false) then stop_smb(smbstate) return false, lookupnames2_result end -- Loop through the domains returned and find the users in each for i = 1, #lookupnames2_result['domains']['domains'], 1 do local domain = lookupnames2_result['domains']['domains'][i]['name'] local sid = lookupnames2_result['domains']['domains'][i]['sid'] local sids = { } -- Start by looking up 500 and up for j = 500, 500 + LSA_GROUPSIZE, 1 do sids[#sids + 1] = sid .. "-" .. j end status, lookupsids2_result = lsa_lookupsids2(smbstate, openpolicy2_result['policy_handle'], sids) if(status == false) then stdnse.print_debug(1, "Error looking up RIDs: %s", lookupsids2_result) else -- Put the details for each name into an array -- NOTE: Be sure to mirror any changes here in the next bit! for j = 1, #lookupsids2_result['names']['names'], 1 do if(lookupsids2_result['names']['names'][j]['sid_type'] == "SID_NAME_USER") then local result = {} result['name'] = lookupsids2_result['names']['names'][j]['name'] result['rid'] = 500 + j - 1 result['domain'] = domain result['type'] = lookupsids2_result['names']['names'][j]['sid_type'] result['typestr'] = lsa_SidType_tostr(result['type']) result['source'] = "LSA Bruteforce" table.insert(response, result) end end end -- Start at RID 1000 local start = 1000 -- Keep track of the number of consecutive empty groups local empty = 0 repeat -- Keep track of the number of names we found in this group local used_names = 0 local sids = {} for j = start, start + LSA_GROUPSIZE, 1 do sids[#sids + 1] = sid .. "-" .. j end -- Try converting this group of RIDs into names status, lookupsids2_result = lsa_lookupsids2(smbstate, openpolicy2_result['policy_handle'], sids) if(status == false) then stdnse.print_debug(1, "Error looking up RIDs: %s", lookupsids2_result) else -- Put the details for each name into an array for j = 1, #lookupsids2_result['names']['names'], 1 do -- Determine the RID local name = lookupsids2_result['names']['names'][j]['name'] local rid = start + j - 1 local typenum = lookupsids2_result['names']['names'][j]['sid_type'] local typestr = lsa_SidType_tostr(typenum) -- Check if the username matches the rid (one server we discovered returned every user as valid, -- this is to prevent that infinite loop) if(tonumber(name) ~= rid) then if(lookupsids2_result['names']['names'][j]['sid_type'] == "SID_NAME_USER") then local result = {} result['name'] = name result['rid'] = rid result['domain'] = domain result['type'] = typenum result['typestr'] = typestr result['source'] = "LSA Bruteforce" table.insert(response, result) -- Increment the number of names we've found used_names = used_names + 1 end end end end -- Either increment or reset the number of empty groups if(used_names == 0) then empty = empty + 1 else empty = 0 end -- Go to the next set of RIDs start = start + LSA_GROUPSIZE until (status == false or (empty == LSA_MINEMPTY)) end -- Close the handle lsa_close(smbstate, openpolicy2_result['policy_handle']) stop_smb(smbstate) return true, response end ---Gets the best possible list of user accounts on the remote system using every available method. -- -- TODO: Caching, store this in the registry -- --@param host The host object. --@return (status, result, names) If status is false, result is an error message; otherwise, result -- is an array of users indexed by username and names is a sorted array of names. function get_user_list(host) local status_samr, result_samr local status_lsa, result_lsa local response = {} local names = {} local i, v status_lsa, result_lsa = lsa_enum_users(host) if(status_lsa == false) then stdnse.print_debug("MSRPC: Failed to enumerate users through LSA: %s", result_lsa) else for i = 1, #result_lsa, 1 do if(result_lsa[i]['name'] ~= nil and result_lsa[i]['type'] == "SID_NAME_USER") then response[result_lsa[i]['domain'] .. '\\' .. result_lsa[i]['name']] = result_lsa[i] end end end status_samr, result_samr = samr_enum_users(host) if(status_samr == false) then stdnse.print_debug("MSRPC: Failed to enumerate users through SAMR: %s", result_samr) else for i = 1, #result_samr, 1 do if(result_samr[i]['name'] ~= nil and result_samr[i]['type'] == "SID_NAME_USER") then response[result_samr[i]['domain'] .. '\\' .. result_samr[i]['name']] = result_samr[i] end end end if(status_samr == false and status_lsa == false) then return false, "MSRPC: Couldn't enumerate users; see debug output for more information" end for i, v in pairs(response) do table.insert(names, i) end table.sort(names, function(a,b) return a:lower() < b:lower() end ) return true, response, names end ---Retrieve information about a domain. This is done by three separate calls to samr_querydomaininfo2() to get all -- possible information. smbstate has to be in the proper state for this to work. local function get_domain_info(host, domain) local result = {} local status, smbstate, bind_result, connect4_result, lookupdomain_result, opendomain_result, enumdomainusers_result -- Create the SMB session status, smbstate = start_smb(host, SAMR_PATH) if(status == false) then return false, smbstate end -- Bind to SAMR service status, bind_result = bind(smbstate, SAMR_UUID, SAMR_VERSION, nil) if(status == false) then stop_smb(smbstate) return false, bind_result end -- Call connect4() status, connect4_result = samr_connect4(smbstate, host.ip) if(status == false) then stop_smb(smbstate) return false, connect4_result end -- Call LookupDomain() status, lookupdomain_result = samr_lookupdomain(smbstate, connect4_result['connect_handle'], domain) if(status == false) then samr_close(smbstate, connect4_result['connect_handle']) stop_smb(smbstate) return false, "Couldn't look up the domain: " .. lookupdomain_result end -- Call OpenDomain() status, opendomain_result = samr_opendomain(smbstate, connect4_result['connect_handle'], lookupdomain_result['sid']) if(status == false) then samr_close(smbstate, connect4_result['connect_handle']) stop_smb(smbstate) return false, opendomain_result end -- Call QueryDomainInfo2() to get domain properties. We call these for three types -- 1, 8, and 12, since those return -- the most useful information. local status_1, querydomaininfo2_result_1 = samr_querydomaininfo2(smbstate, opendomain_result['domain_handle'], 1) local status_8, querydomaininfo2_result_8 = samr_querydomaininfo2(smbstate, opendomain_result['domain_handle'], 8) local status_12, querydomaininfo2_result_12 = samr_querydomaininfo2(smbstate, opendomain_result['domain_handle'], 12) if(status_1 == false) then samr_close(smbstate, connect4_result['connect_handle']) stop_smb(smbstate) return false, querydomaininfo2_result_1 end if(status_8 == false) then samr_close(smbstate, connect4_result['connect_handle']) stop_smb(smbstate) return false, querydomaininfo2_result_8 end if(status_12 == false) then samr_close(smbstate, connect4_result['connect_handle']) stop_smb(smbstate) return false, querydomaininfo2_result_12 end -- Call EnumDomainUsers() to get users status, enumdomainusers_result = samr_enumdomainusers(smbstate, opendomain_result['domain_handle']) if(status == false) then samr_close(smbstate, connect4_result['connect_handle']) stop_smb(smbstate) return false, enumdomainusers_result end -- Call EnumDomainAliases() to get groups local status, enumdomaingroups_result = samr_enumdomainaliases(smbstate, opendomain_result['domain_handle']) if(status == false) then samr_close(smbstate, connect4_result['connect_handle']) stop_smb(smbstate) return false, enumdomaingroups_result end -- Close the domain handle samr_close(smbstate, opendomain_result['domain_handle']) -- Close the smb session stop_smb(smbstate) -- Create a list of groups local groups = {} if(enumdomaingroups_result['sam'] ~= nil and enumdomaingroups_result['sam']['entries'] ~= nil) then for _, group in ipairs(enumdomaingroups_result['sam']['entries']) do table.insert(groups, group.name) end end -- Create the list of users local names = {} if(enumdomainusers_result['sam'] ~= nil and enumdomainusers_result['sam']['entries'] ~= nil) then for _, name in ipairs(enumdomainusers_result['sam']['entries']) do table.insert(names, name.name) end end -- Our output table local response = {} -- Finally, start filling in the response! response['name'] = domain response['sid'] = lookupdomain_result['sid'] response['groups'] = groups response['users'] = names if(querydomaininfo2_result_8['info']['domain_create_time'] ~= 0) then response['created'] = os.date("%Y-%m-%d %H:%M:%S", querydomaininfo2_result_8['info']['domain_create_time']) else response['created'] = "unknown" end -- Password characteristics response['min_password_length'] = querydomaininfo2_result_1['info']['min_password_length'] response['max_password_age'] = querydomaininfo2_result_1['info']['max_password_age'] / 60 / 60 / 24 response['min_password_age'] = querydomaininfo2_result_1['info']['min_password_age'] / 60 / 60 / 24 response['password_history'] = querydomaininfo2_result_1['info']['password_history_length'] response['lockout_duration'] = querydomaininfo2_result_12['info']['lockout_duration'] / 60 response['lockout_threshold'] = querydomaininfo2_result_12['info']['lockout_threshold'] response['lockout_window'] = querydomaininfo2_result_12['info']['lockout_window'] / 60 -- Sanity check the different values, and remove them if they don't appear to be set if(response['min_password_length'] <= 0) then response['min_password_length'] = nil end if(response['max_password_age'] < 0 or response['max_password_age'] > 5000) then response['max_password_age'] = nil end if(response['min_password_age'] <= 0) then response['min_password_age'] = nil end if(response['password_history'] <= 0) then response['password_history'] = nil end if(response['lockout_duration'] <= 0) then response['lockout_duration'] = nil end if(response['lockout_threshold'] <= 0) then response['lockout_threshold'] = nil end if(response['lockout_window'] <= 0) then response['lockout_window'] = nil end local password_properties = querydomaininfo2_result_1['info']['password_properties'] if(#password_properties > 0) then local password_properties_response = {} password_properties_response['name'] = "Password properties:" for j = 1, #password_properties, 1 do table.insert(password_properties_response, samr_PasswordProperties_tostr(password_properties[j])) end response['password_properties'] = password_properties_response end return true, response end function get_domains(host) local result = {} local status, smbstate, bind_result, connect4_result, enumdomains_result local i, j -- Create the SMB session status, smbstate = start_smb(host, SAMR_PATH) if(status == false) then return false, smbstate end -- Bind to SAMR service status, bind_result = bind(smbstate, SAMR_UUID, SAMR_VERSION, nil) if(status == false) then stop_smb(smbstate) return false, bind_result end -- Call connect4() status, connect4_result = samr_connect4(smbstate, host.ip) if(status == false) then stop_smb(smbstate) return false, connect4_result end -- Call EnumDomains() status, enumdomains_result = samr_enumdomains(smbstate, connect4_result['connect_handle']) if(status == false) then samr_close(smbstate, connect4_result['connect_handle']) stop_smb(smbstate) return false, enumdomains_result end -- Close the connect handle samr_close(smbstate, connect4_result['connect_handle']) -- Close the SMB session stop_smb(smbstate) -- If no domains were returned, return an error (not sure that this can ever happen, but who knows?) if(#enumdomains_result['sam']['entries'] == 0) then return false, "No domains could be found" end local response = {} for i = 1, #enumdomains_result['sam']['entries'], 1 do local domain = enumdomains_result['sam']['entries'][i]['name'] local status, domain_info = get_domain_info(host, domain) if(not(status)) then return false, "Couldn't get info for the domain: " .. domain_info else response[domain] = domain_info end end return true, response end ---Create a "service" on a remote machine. -- -- This service is linked to an executable that is already on the system. The -- name of the service can be whatever you want it to be. The service is -- created in the "stopped" state with "manual" startup, and it ignores errors. -- The 'servicename' is what people will see on the system while the service is -- running, and what'll stay there is something happens that the service can't -- be deleted properly. -- -- Note that this (and the other "service" functions) are highly invasive. They -- make configuration changes to the machine that can potentially affect -- stability. -- -- The reason that this and the other "service" functions don't require a -- smbstate object is that I wanted them to be independent. If a -- service fails to start, I don't want it to affect the program's ability to -- stop and delete the service. Every service function is independent. -- --@param host The host object. --@param servicename The name of the service to create. --@param path The path and filename on the remote system. --@return status true or false --@return error message if status is false function service_create(host, servicename, path) local status, smbstate, bind_result, open_result, create_result, close_result stdnse.print_debug(1, "Creating service: %s (%s)", servicename, path) -- Create the SMB session status, smbstate = start_smb(host, SVCCTL_PATH) if(status == false) then return false, smbstate end -- Bind to SVCCTL service status, bind_result = bind(smbstate, SVCCTL_UUID, SVCCTL_VERSION, nil) if(status == false) then smb.stop(smbstate) return false, bind_result end -- Open the service manager stdnse.print_debug(2, "Opening the remote service manager") status, open_result = svcctl_openscmanagerw(smbstate, host.ip) if(status == false) then smb.stop(smbstate) return false, open_result end -- Create the service stdnse.print_debug(2, "Creating the service", servicename) status, create_result = svcctl_createservicew(smbstate, open_result['handle'], servicename, servicename, path) if(status == false) then smb.stop(smbstate) return false, create_result end -- Close the handle to the service status, close_result = svcctl_closeservicehandle(smbstate, create_result['handle']) if(status == false) then smb.stop(smbstate) return false, close_result end -- Close the service manager status, close_result = svcctl_closeservicehandle(smbstate, open_result['handle']) if(status == false) then smb.stop(smbstate) return false, close_result end smb.stop(smbstate) return true end ---Start a service on the remote machine based on its name. For example, to start the registry -- service, this can be called on "RemoteRegistry". -- -- If you start a service on a machine, you should also stop it when you're finished. Every service -- running is extra attack surface for a potential attacker -- --@param host The host object. --@param servicename The name of the service to start. --@param args [optional] The arguments to pass to the service. Most built-in services don't -- require arguments. --@return (status, err) If status is false, err is an error message; -- otherwise, err is undefined. function service_start(host, servicename, args) local status, smbstate, bind_result, open_result, open_service_result, start_result, close_result, query_result stdnse.print_debug(1, "Starting service: %s", servicename) -- Create the SMB session status, smbstate = start_smb(host, SVCCTL_PATH) if(status == false) then return false, smbstate end -- Bind to SVCCTL service status, bind_result = bind(smbstate, SVCCTL_UUID, SVCCTL_VERSION, nil) if(status == false) then smb.stop(smbstate) return false, bind_result end -- Open the service manager stdnse.print_debug(1, "Opening the remote service manager") status, open_result = svcctl_openscmanagerw(smbstate, host.ip) if(status == false) then smb.stop(smbstate) return false, open_result end -- Get a handle to the service stdnse.print_debug(2, "Getting a handle to the service") status, open_service_result = svcctl_openservicew(smbstate, open_result['handle'], servicename) if(status == false) then smb.stop(smbstate) return false, open_service_result end -- Start it stdnse.print_debug(2, "Starting the service") status, start_result = svcctl_startservicew(smbstate, open_service_result['handle'], args) if(status == false) then smb.stop(smbstate) return false, start_result end -- Wait for it to start (TODO: Check the query result better) stdnse.print_debug(1, "Waiting for the service to start") repeat status, query_result = svcctl_queryservicestatus(smbstate, open_service_result['handle']) if(status == false) then smb.stop(smbstate) return false, query_result end stdnse.sleep(.5) until query_result['service_status']['controls_accepted'][1] == "SERVICE_CONTROL_STOP" or query_result['service_status']['state'][1] == "SERVICE_STATE_ACTIVE" -- Close the handle to the service status, close_result = svcctl_closeservicehandle(smbstate, open_service_result['handle']) if(status == false) then smb.stop(smbstate) return false, close_result end -- Close the service manager status, close_result = svcctl_closeservicehandle(smbstate, open_result['handle']) if(status == false) then smb.stop(smbstate) return false, close_result end smb.stop(smbstate) return true end ---Stop a service on the remote machine based on its name. For example, to stop the registry -- service, this can be called on "RemoteRegistry". -- -- This can be called on a service that's already stopped without hurting anything (just keep in mind -- that an error will be returned). -- --@param host The host object. --@param servicename The name of the service to stop. --@return (status, err) If status is false, err is an error message; -- otherwise, err is undefined. function service_stop(host, servicename) local status, smbstate, bind_result, open_result, open_service_result, control_result, close_result, query_result stdnse.print_debug(1, "Stopping service: %s", servicename) -- Create the SMB session status, smbstate = start_smb(host, SVCCTL_PATH) if(status == false) then return false, smbstate end -- Bind to SVCCTL service status, bind_result = bind(smbstate, SVCCTL_UUID, SVCCTL_VERSION, nil) if(status == false) then smb.stop(smbstate) return false, bind_result end -- Open the service manager stdnse.print_debug(2, "Opening the remote service manager") status, open_result = svcctl_openscmanagerw(smbstate, host.ip) if(status == false) then smb.stop(smbstate) return false, open_result end -- Get a handle to the service stdnse.print_debug(2, "Getting a handle to the service") status, open_service_result = svcctl_openservicew(smbstate, open_result['handle'], servicename) if(status == false) then smb.stop(smbstate) return false, open_service_result end -- Stop it stdnse.print_debug(2, "Stopping the service") status, control_result = svcctl_controlservice(smbstate, open_service_result['handle'], "SERVICE_CONTROL_STOP") if(status == false) then smb.stop(smbstate) return false, control_result end -- Wait for it to stop (TODO: Check the query result better) stdnse.print_debug(2, "Waiting for the service to stop") repeat status, query_result = svcctl_queryservicestatus(smbstate, open_service_result['handle']) if(status == false) then smb.stop(smbstate) return false, query_result end stdnse.sleep(.5) until query_result['service_status']['controls_accepted'][1] == nil -- Close the handle to the service status, close_result = svcctl_closeservicehandle(smbstate, open_service_result['handle']) if(status == false) then smb.stop(smbstate) return false, close_result end -- Close the service manager status, close_result = svcctl_closeservicehandle(smbstate, open_result['handle']) if(status == false) then smb.stop(smbstate) return false, close_result end smb.stop(smbstate) return true end ---Delete a service on the remote machine based on its name. I don't recommend deleting any services that -- you didn't create. -- --@param host The host object. --@param servicename The name of the service to delete. --@return (status, err) If status is false, err is an error message; -- otherwise, err is undefined. function service_delete(host, servicename) local status, smbstate, bind_result, open_result, open_service_result, delete_result, close_result stdnse.print_debug(1, "Deleting service: %s", servicename) -- Create the SMB session status, smbstate = start_smb(host, SVCCTL_PATH) if(status == false) then return false, smbstate end -- Bind to SVCCTL service status, bind_result = bind(smbstate, SVCCTL_UUID, SVCCTL_VERSION, nil) if(status == false) then smb.stop(smbstate) return false, bind_result end -- Open the service manager stdnse.print_debug(2, "Opening the remote service manager") status, open_result = svcctl_openscmanagerw(smbstate, host.ip) if(status == false) then smb.stop(smbstate) return false, open_result end -- Get a handle to the service stdnse.print_debug(2, "Getting a handle to the service: %s", servicename) status, open_service_result = svcctl_openservicew(smbstate, open_result['handle'], servicename) if(status == false) then smb.stop(smbstate) return false, open_service_result end -- Delete the service stdnse.print_debug(2, "Deleting the service") status, delete_result = svcctl_deleteservice(smbstate, open_service_result['handle']) if(status == false) then smb.stop(smbstate) return false, delete_result end -- Close the handle to the service status, close_result = svcctl_closeservicehandle(smbstate, open_service_result['handle']) if(status == false) then smb.stop(smbstate) return false, close_result end -- Close the service manager status, close_result = svcctl_closeservicehandle(smbstate, open_result['handle']) if(status == false) then smb.stop(smbstate) return false, close_result end smb.stop(smbstate) return true end ---Retrieves statistical information about the given server. -- -- This function requires administrator privileges to run, and is present on -- all Windows versions, so it's a useful way to check whether or not an -- account is administrative. --@param host The host object --@return status true or false --@return If status is false, data is an error message; otherwise, data is a -- table of information about the server. function get_server_stats(host) local stats local status local smbstate -- Create the SMB session status, smbstate = start_smb(host, SRVSVC_PATH) if(status == false) then return false, smbstate end -- Bind to SRVSVC service local status, bind_result = bind(smbstate, SRVSVC_UUID, SRVSVC_VERSION, nil) if(status == false) then smb.stop(smbstate) return false, bind_result end -- Call netservergetstatistics for 'server' local status, netservergetstatistics_result = srvsvc_netservergetstatistics(smbstate, host.ip) if(status == false) then smb.stop(smbstate) return false, netservergetstatistics_result end -- Stop the session smb.stop(smbstate) -- Build the response local stats = netservergetstatistics_result['stat'] -- Convert the date to a string stats['start_str'] = os.date("%Y-%m-%d %H:%M:%S", stats['start']) -- Get the period and convert it to a proper time offset stats['period'] = os.time() - stats['start'] if(stats['period'] > 60 * 60 * 24) then stats['period_str'] = string.format("%dd%dh%02dm%02ds", stats['period'] / (60*60*24), (stats['period'] % (60*60*24)) / 3600, (stats['period'] % 3600) / 60, stats['period'] % 60) elseif(stats['period'] > 60 * 60) then stats['period_str'] = string.format("%dh%02dm%02ds", stats['period'] / 3600, (stats['period'] % 3600) / 60, stats['period'] % 60) else stats['period_str'] = string.format("%02dm%02ds", stats['period'] / 60, stats['period'] % 60) end -- Combine the 64-bit values stats['bytessent'] = bit.bor(bit.lshift(stats['bytessent_high'], 32), stats['bytessent_low']) stats['bytesrcvd'] = bit.bor(bit.lshift(stats['bytesrcvd_high'], 32), stats['bytesrcvd_low']) -- Sidestep divide-by-zero errors (probably won't come up, but I'd rather be safe) if(stats['period'] == 0) then stats['period'] = 1 end -- Get the bytes/second values stats['bytessentpersecond'] = stats['bytessent'] / stats['period'] stats['bytesrcvdpersecond'] = stats['bytesrcvd'] / stats['period'] return true, stats end ---Attempts to enumerate the shares on a remote system using MSRPC calls. Without a user account, -- this will likely fail against a modern system, but will succeed against Windows 2000. -- --@param host The host object. --@return Status (true or false). --@return List of shares (if status is true) or an an error string (if status is false). function enum_shares(host) local status, smbstate local bind_result, netshareenumall_result local shares local i, v -- Create the SMB session status, smbstate = start_smb(host, SRVSVC_PATH) if(status == false) then return false, smbstate end -- Bind to SRVSVC service status, bind_result = bind(smbstate, SRVSVC_UUID, SRVSVC_VERSION, nil) if(status == false) then smb.stop(smbstate) return false, bind_result end -- Call netshareenumall status, netshareenumall_result = srvsvc_netshareenumall(smbstate, host.ip) if(status == false) then smb.stop(smbstate) return false, netshareenumall_result end -- Stop the SMB session smb.stop(smbstate) -- Convert the share list to an array shares = {} for i, v in pairs(netshareenumall_result['ctr']['array']) do shares[#shares + 1] = v['name'] end return true, shares end ---Attempts to retrieve additional information about a share. Will fail unless we have -- administrative access. -- --@param host The host object. --@return Status (true or false). --@return A table of information about the share (if status is true) or an an error string (if -- status is false). function get_share_info(host, name) local response = {} -- Create the SMB session local status, smbstate = start_smb(host, SRVSVC_PATH) if(status == false) then return false, smbstate end -- Bind to SRVSVC service local status, bind_result = bind(smbstate, SRVSVC_UUID, SRVSVC_VERSION, nil) if(status == false) then smb.stop(smbstate) return false, bind_result end -- Call NetShareGetInfo local status, netsharegetinfo_result = srvsvc_netsharegetinfo(smbstate, host.ip, name, 2) if(status == false) then smb.stop(smbstate) return false, netsharegetinfo_result end smb.stop(smbstate) return true, netsharegetinfo_result end --####################################################################-- --# 1) RRAS RASRPC INTERFACE --####################################################################-- ROUTER_PATH = "\\router" --also can be reached across "\\srvsvc" pipe in WinXP RASRPC_UUID = string.char(0x36, 0x00, 0x61, 0x20, 0x22, 0xfa, 0xcf, 0x11, 0x98, 0x23, 0x00, 0xa0, 0xc9, 0x11, 0xe5, 0xdf) RASRPC_VERSION = 1 --####################################################################-- --# 2) RRAS RASRPC TYPES --####################################################################-- --####################################################################-- --typedef enum _ReqTypes{ -- REQTYPE_PORTENUM = 21,//Request to enumerate all the port information on the RRAS. -- REQTYPE_GETINFO = 22,//Request to get information about a specific port on the RRAS. -- REQTYPE_GETDEVCONFIG = 73,//Request to get device information on the RRAS. -- REQTYPE_SETDEVICECONFIGINFO = 94,//Request to set device configuration information on RRAS. -- REQTYPE_GETDEVICECONFIGINFO = 95,//Request to get device configuration information on RRAS. -- REQTYPE_GETCALLEDID = 105,//Request to get CalledId information for a specific device on RRAS. -- REQTYPE_SETCALLEDID = 106,//Request to set CalledId information for a specific device on RRAS. -- REQTYPE_GETNDISWANDRIVERCAPS = 111//Request to get the encryption capabilities of the RRAS. --} ReqTypes; --- The ReqTypes enumerations indicate the different types of message requests that can be passed in --the RB_ReqType field of RequestBuffer structure. -- * [MS-RRASM] 2.2.1.1.18 ReqTypes --####################################################################-- RRAS_RegTypes = {} RRAS_RegTypes['PORTENUM'] = 21 RRAS_RegTypes['GETINFO'] = 22 RRAS_RegTypes['GETDEVCONFIG'] = 73 --this method is vulnerable to ms06-025 RRAS_RegTypes['SETDEVICECONFIGINFO'] = 94 RRAS_RegTypes['GETDEVICECONFIGINFO'] = 95 RRAS_RegTypes['GETCALLEDID'] = 105 RRAS_RegTypes['SETCALLEDID'] = 106 RRAS_RegTypes['GETNDISWANDRIVERCAPS'] = 111 --####################################################################-- --typedef struct _RequestBuffer { -- DWORD RB_PCBIndex;//A unique identifier for the port. -- ReqTypes RB_Reqtype;//A ReqTypes enumeration value indicating the request type sent to the server. -- DWORD RB_Dummy;//MUST be set to the size of the ULONG_PTR on the client. -- DWORD RB_Done;//MBZ -- LONGLONG Alignment;//MBZ -- BYTE RB_Buffer[1];//variable size --} RequestBuffer; --- The RequestBuffer is a generic information container used by the RasRpcSubmitRequest --method to set or retrieve information on RRAS server. This method performs --serialization of RequestBuffer structure. -- Note: This structure is not an IDL specification and as such is not translated into NDR. -- @return Returns a blob of RequestBuffer structure. -- * [MS-RRASM] 2.2.1.2.218 RequestBuffer --####################################################################-- function RRAS_marshall_RequestBuffer(RB_PCBIndex, RB_ReqType, RB_Buffer) local rb_blob, RB_Dummy, RB_Done, Alignment RB_Dummy = 4 RB_Done = 0 Alignment = 0 rb_blob = bin.pack("3.3.4 Message Processing Events and Sequencing Rules --####################################################################-- RRAS_Opnums = {} RRAS_Opnums["RasRpcDeleteEntry"] = 5 RRAS_Opnums["RasRpcGetUserPreferences"] = 9 RRAS_Opnums["RasRpcSetUserPreferences"] = 10 RRAS_Opnums["RasRpcGetSystemDirectory"] = 11 RRAS_Opnums["RasRpcSubmitRequest"] = 12 RRAS_Opnums["RasRpcGetInstalledProtocolsEx"] = 14 RRAS_Opnums["RasRpcGetVersion"] = 15 --####################################################################-- --DWORD RasRpcSubmitRequest( -- [in] handle_t hServer,//An RPC binding handle. (not send) -- [in, out, unique, size_is(dwcbBufSize)] PBYTE pReqBuffer,//A pointer to a buffer of size dwcbBufSize. -- [in] DWORD dwcbBufSize//Size in byte of pReqBuffer. --); ---The RasRpcSubmitRequest method retrieves or sets the configuration data on RRAS server. -- @param smbstate The smb object. -- @param pReqBuffer The buffer MUST be large enough to hold the RequestBuffer --structure and RequestBuffer.RB_Buffer data. RequestBuffer.RB_Reqtype --specifies the request type which will be processed by the server and --RequestBuffer.RB_Buffer specifies the structure specific to RB_Reqtype --to be processed. RequestBuffer.RB_PCBIndex MUST be set to the unique port identifier --whose information is sought for ReqTypes REQTYPE_GETINFO and REQTYPE_GETDEVCONFIG. --For other valid ReqTypes, RequestBuffer.RB_PCBIndex MUST be set to zero. -- @param dwcbBufSize Integer representing the size of pRegBuffer in bytes. -- @return (status, result) --* status == true -> result is a blob that represent a pRegBuffer . --* status == false -> result is a error message that caused the fuzz. -- * [MS-RRASM] 3.3.4.5 RasRpcSubmitRequest (Opnum 12) --####################################################################-- function RRAS_SubmitRequest(smbstate, pReqBuffer, dwcbBufSize) --sanity check if(dwcbBufSize == nil) then dwcbBufSize = #pReqBuffer end --pack the request local req_blob --[in, out, unique, size_is(dwcbBufSize) PBYTE pReqBuffer, req_blob = bin.pack("3.1.1.1 DNS Server Configuration Information DNSSERVER_ConfInfo = { DNSSERVER_IntProp = {}, DNSSERVER_AddrArrProp = {}, DNSSERVER_StrProp = {}, DNSSERVER_StrLstProp = {} } --####################################################################-- --# 3) DNS SERVER MANAGEMENT SERVICE OPERATIONS --####################################################################-- local DNSSERVER_DEBUG_LVL = 2 --debug level for dnsserver operations when calling stdnse.print_debug --####################################################################-- --- DNSSERVER operation numbers. -- * [MS-DNSP] 3.1.4 Message Processing Events and Sequencing Rules --####################################################################-- DNSSERVER_Opnums = {} DNSSERVER_Opnums['R_DnssrvOperation'] = 0 DNSSERVER_Opnums['R_DnssrvQuery'] = 1 DNSSERVER_Opnums['R_DnssrvComplexOperation'] = 2 DNSSERVER_Opnums['R_DnssrvEnumRecords'] = 3 DNSSERVER_Opnums['R_DnssrvUpdateRecord'] = 4 DNSSERVER_Opnums['R_DnssrvOperation2'] = 5 DNSSERVER_Opnums['R_DnssrvQuery2'] = 6 DNSSERVER_Opnums['R_DnssrvComplexOperation2'] = 7 DNSSERVER_Opnums['R_DnssrvEnumRecords2'] = 8 DNSSERVER_Opnums['R_DnssrvUpdateRecord2'] = 9 --####################################################################-- --[[ LONG R_DnssrvQuery( [in, unique, string] LPCWSTR pwszServerName, [in, unique, string] LPCSTR pszZone, [in, unique, string] LPCSTR pszOperation, [out] PDWORD pdwTypeId, [out, switch_is(*pdwTypeId)] DNSSRV_RPC_UNION* ppData); --]] ---Issues type specific information queries to server. This method is --obsoleted by R_DnssrvQuery2. -- @param smbstate The smb object. -- @param server_name String that designates a fully qualified domain --name of the target server. The server MUST ignore this value. -- @param zone String that designates the name of the zone to be queried. --For operations specific to a particular zone, this field MUST contain --the name of the zone. For all other operations, this field MUST be nil. -- @param operation String that designates the name of the operation to --be performed on the server. These are two sets of allowed values for --pszOperation: --* zone == nil -> see DNSSERVER_ConfInfo table. --* zone == "some_zone" -> see DNSSERVER_ZoneInfo table. -- @return (status, result) --* status == true -> --that indicates the type of result['data']. --** result['data'] - A DNSSRV_RPC_UNION blob that contains a --** result['type_id'] - Integer that on success contains a value of type DNS_RPC_TYPEID --data-structure as indicated by result['type_id']. --* status == false -> --** result - Is a error message that caused the fuzz. -- * [MS-DNSP] 3.1.4.2 R_DnssrvQuery (Opnum 1) --####################################################################-- function DNSSERVER_Query(smbstate, server_name, zone, operation) local status --call local req_blob, srv_name_utf16, zone_ascii, operation_ascii --[in, unique, string] LPCWSTR pwszServerName, local unique_ptr unique_ptr = 0x00020000 srv_name_utf16 = msrpctypes.string_to_unicode(server_name, true) req_blob = bin.pack("(align-datalen%align)%align. --####################################################################-- function get_pad(data, align, pad_byte) pad_byte = pad_byte or "\00" return string.rep(pad_byte, (align-#data%align)%align) end --####################################################################-- ---Generates a random string of the requested length. --@param length The length of the string to return. --@param charset The set of letters to choose from. Default: ASCII letters and numbers --@return The random string. --####################################################################-- function random_crap(length, charset) charset = charset or "0123456789abcdefghijklmnoprstuvzxwyABCDEFGHIJKLMNOPRSTUVZXWY" local random_str = "" for i = 1, length, 1 do local random = math.random(#charset) random_str = random_str .. string.sub(charset, random, random) end return random_str end return _ENV;