local nmap = require "nmap" local packet = require "packet" local ipOps = require "ipOps" local bin = require "bin" local stdnse = require "stdnse" local target = require "target" local table = require "table" local math = require "math" local string = require "string" description = [[ Discovers routers that are running PIM (Protocol Independent Multicast). This works by sending a PIM Hello message to the PIM multicast address 224.0.0.13 and listening for Hello messages from other routers. ]] -- -- @args broadcast-pim-discovery.timeout Time to wait for responses in seconds. -- Defaults to 5 seconds. -- --@usage -- nmap --script broadcast-pim-discovery -- -- nmap --script broadcast-pim-discovery -e eth1 -- --script-args 'broadcast-pim-discovery.timeout=10' -- --@output -- Pre-scan script results: -- | broadcast-pim-discovery: -- | 172.16.0.12 -- | 172.16.0.31 -- | 172.16.0.44 -- |_ Use the newtargets script-arg to add the results as targets author = "Hani Benhabiles" license = "Same as Nmap--See http://nmap.org/book/man-legal.html" categories = {"discovery", "safe", "broadcast"} prerule = function() if nmap.address_family() ~= 'inet' then stdnse.print_verbose("%s is IPv4 only.", SCRIPT_NAME) return false end if not nmap.is_privileged() then stdnse.print_verbose("%s not running for lack of privileges.", SCRIPT_NAME) return false end return true end -- Generates a raw PIM Hello message. --@return hello Raw PIM Hello message local helloRaw = function() -- Version: 2, Type: Hello (0) local hello_raw = bin.pack(">C", 0x20) -- Reserved hello_raw = hello_raw.. bin.pack(">C", 0x00) -- Checksum: Calculated later hello_raw = hello_raw.. bin.pack(">S", 0x0000) -- Options (TLVs) -- Hold time 1 second hello_raw = hello_raw.. bin.pack(">SSS", 0x01, 0x02, 0x01) -- Generation ID: Random hello_raw = hello_raw.. bin.pack(">SSI", 0x14, 0x04, math.random(23456)) -- DR Priority: 1 hello_raw = hello_raw.. bin.pack(">SSI", 0x13, 0x04, 0x01) -- State fresh capable: Version = 1, interval = 0, Reserved hello_raw = hello_raw.. bin.pack(">SSCCS", 0x15, 0x04, 0x01, 0x00, 0x00) -- Calculate checksum hello_raw = hello_raw:sub(1,2) .. bin.pack(">S", packet.in_cksum(hello_raw)) .. hello_raw:sub(5) return hello_raw end -- Sends a PIM Hello message. --@param interface Network interface to use. --@param dstip Destination IP to which send the Hello. local helloQuery = function(interface, dstip) local hello_packet, sock, eth_hdr local srcip = interface.address local hello_raw = helloRaw() local ip_raw = bin.pack("H", "45c00040ed780000016718bc0a00c8750a00c86b") .. hello_raw hello_packet = packet.Packet:new(ip_raw, ip_raw:len()) hello_packet:ip_set_bin_src(ipOps.ip_to_str(srcip)) hello_packet:ip_set_bin_dst(ipOps.ip_to_str(dstip)) hello_packet:ip_set_len(ip_raw:len()) hello_packet:ip_count_checksum() sock = nmap.new_dnet() sock:ethernet_open(interface.device) -- Ethernet multicast for PIM, our ethernet address and packet type IP eth_hdr = bin.pack(">HAS", "01 00 5e 00 00 0d", interface.mac, 0x0800) sock:ethernet_send(eth_hdr .. hello_packet.buf) sock:ethernet_close() end -- Listens for PIM Hello messages. --@param interface Network interface to listen on. --@param timeout Time to listen for a response. --@param responses table to insert responders' IPs into. local helloListen = function(interface, timeout, responses) local condvar = nmap.condvar(responses) local start = nmap.clock_ms() local listener = nmap.new_socket() local p, hello_raw, status, l3data, _ -- PIM packets that are sent to 224.0.0.13 and not coming from our host local filter = 'ip proto 103 and dst host 224.0.0.13 and src host not ' .. interface.address listener:set_timeout(100) listener:pcap_open(interface.device, 1024, true, filter) while (nmap.clock_ms() - start) < timeout do status, _, _, l3data = listener:pcap_receive() if status then p = packet.Packet:new(l3data, #l3data) hello_raw = string.sub(l3data, p.ip_hl*4 + 1) -- Check that PIM Type is Hello if p and hello_raw:byte(1) == 0x20 then table.insert(responses, p.ip_src) end end end condvar("signal") end --- Returns the network interface used to send packets to the destination host. --@param destination host to which the interface is used. --@return interface Network interface used for destination host. local getInterface = function(destination) -- First, create dummy UDP connection to get interface local sock = nmap.new_socket() local status, err = sock:connect(destination, "12345", "udp") if not status then stdnse.print_verbose("%s: %s", SCRIPT_NAME, err) return end local status, address, _, _, _ = sock:get_info() if not status then stdnse.print_verbose("%s: %s", SCRIPT_NAME, err) return end for _, interface in pairs(nmap.list_interfaces()) do if interface.address == address then return interface end end end action = function() local timeout = tonumber(stdnse.get_script_args(SCRIPT_NAME .. ".timeout")) or 5 local responses = {} timeout = timeout * 1000 local mcast = "224.0.0.13" -- Get the network interface to use local interface = nmap.get_interface() if interface then interface = nmap.get_interface_info(interface) else interface = getInterface(mcast) end if not interface then return ("\n ERROR: Couldn't get interface for %s"):format(mcast) end stdnse.print_debug("%s: will send via %s interface.", SCRIPT_NAME, interface.shortname) -- Launch listener stdnse.new_thread(helloListen, interface, timeout, responses) -- Send Hello after small sleep so the listener doesn't miss any responses stdnse.sleep(0.1) helloQuery(interface, mcast) local condvar = nmap.condvar(responses) condvar("wait") if #responses > 0 then table.sort(responses) if target.ALLOW_NEW_TARGETS then for _, response in pairs(responses) do target.add(response) end else table.insert(responses,"Use the newtargets script-arg to add the results as targets") end return stdnse.format_output(true, responses) end end