/*************************************************************************** * IPv6Header.cc -- The IPv6Header Class represents an IPv4 datagram. It * * contains methods to set any header field. In general, these methods do * * error checkings and byte order conversion. * * * ***********************IMPORTANT NMAP LICENSE TERMS************************ * * * The Nmap Security Scanner is (C) 1996-2011 Insecure.Com LLC. Nmap is * * also a registered trademark of Insecure.Com LLC. This program is free * * software; you may redistribute and/or modify it under the terms of the * * GNU General Public License as published by the Free Software * * Foundation; Version 2 with the clarifications and exceptions described * * below. This guarantees your right to use, modify, and redistribute * * this software under certain conditions. If you wish to embed Nmap * * technology into proprietary software, we sell alternative licenses * * (contact sales@insecure.com). Dozens of software vendors already * * license Nmap technology such as host discovery, port scanning, OS * * detection, and version detection. * * * * Note that the GPL places important restrictions on "derived works", yet * * it does not provide a detailed definition of that term. To avoid * * misunderstandings, we consider an application to constitute a * * "derivative work" for the purpose of this license if it does any of the * * following: * * o Integrates source code from Nmap * * o Reads or includes Nmap copyrighted data files, such as * * nmap-os-db or nmap-service-probes. * * o Executes Nmap and parses the results (as opposed to typical shell or * * execution-menu apps, which simply display raw Nmap output and so are * * not derivative works.) * * o Integrates/includes/aggregates Nmap into a proprietary executable * * installer, such as those produced by InstallShield. * * o Links to a library or executes a program that does any of the above * * * * The term "Nmap" should be taken to also include any portions or derived * * works of Nmap. This list is not exclusive, but is meant to clarify our * * interpretation of derived works with some common examples. Our * * interpretation applies only to Nmap--we don't speak for other people's * * GPL works. * * * * If you have any questions about the GPL licensing restrictions on using * * Nmap in non-GPL works, we would be happy to help. As mentioned above, * * we also offer alternative license to integrate Nmap into proprietary * * applications and appliances. These contracts have been sold to dozens * * of software vendors, and generally include a perpetual license as well * * as providing for priority support and updates as well as helping to * * fund the continued development of Nmap technology. Please email * * sales@insecure.com for further information. * * * * As a special exception to the GPL terms, Insecure.Com LLC grants * * permission to link the code of this program with any version of the * * OpenSSL library which is distributed under a license identical to that * * listed in the included docs/licenses/OpenSSL.txt file, and distribute * * linked combinations including the two. You must obey the GNU GPL in all * * respects for all of the code used other than OpenSSL. If you modify * * this file, you may extend this exception to your version of the file, * * but you are not obligated to do so. * * * * If you received these files with a written license agreement or * * contract stating terms other than the terms above, then that * * alternative license agreement takes precedence over these comments. * * * * Source is provided to this software because we believe users have a * * right to know exactly what a program is going to do before they run it. * * This also allows you to audit the software for security holes (none * * have been found so far). * * * * Source code also allows you to port Nmap to new platforms, fix bugs, * * and add new features. You are highly encouraged to send your changes * * to nmap-dev@insecure.org for possible incorporation into the main * * distribution. By sending these changes to Fyodor or one of the * * Insecure.Org development mailing lists, it is assumed that you are * * offering the Nmap Project (Insecure.Com LLC) the unlimited, * * non-exclusive right to reuse, modify, and relicense the code. Nmap * * will always be available Open Source, but this is important because the * * inability to relicense code has caused devastating problems for other * * Free Software projects (such as KDE and NASM). We also occasionally * * relicense the code to third parties as discussed above. If you wish to * * specify special license conditions of your contributions, just say so * * when you send them. * * * * This program is distributed in the hope that it will be useful, but * * WITHOUT ANY WARRANTY; without even the implied warranty of * * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * * General Public License v2.0 for more details at * * http://www.gnu.org/licenses/gpl-2.0.html , or in the COPYING file * * included with Nmap. * * * ***************************************************************************/ #include "IPv6Header.h" #include "nping.h" #include "common.h" #include "dnet.h" #include "utils.h" IPv6Header::IPv6Header() { this->reset(); } /* End of IPv6Header constructor */ IPv6Header::~IPv6Header() { } /* End of IPv6Header destructor */ /** Sets every class attribute to zero */ void IPv6Header::reset(){ memset(&this->h, 0, sizeof(nping_ipv6_hdr_t)); this->length=40; } /* End of reset() */ /** @warning This method is essential for the superclass getBinaryBuffer() * method to work. Do NOT change a thing unless you know what you're doing */ u8 *IPv6Header::getBufferPointer(){ return (u8*)(&h); } /* End of getBufferPointer() */ /** Stores supplied packet in the internal buffer so the information * can be accessed using the standard get & set methods. * @warning The IPv6Header class is able to hold a maximum of 40 bytes. If the * supplied buffer is longer than that, only the first 40 bytes will be stored * in the internal buffer. * @warning Supplied len MUST be at least 40 bytes (IPv6 header length). * @return OP_SUCCESS on success and OP_FAILURE in case of error */ int IPv6Header::storeRecvData(const u8 *buf, size_t len){ if(buf==NULL || lenreset(); /* Re-init the object, just in case the caller had used it already */ this->length=IPv6_HEADER_LEN; memcpy(&(this->h), buf, IPv6_HEADER_LEN); } return OP_SUCCESS; } /* End of storeRecvData() */ /** This method is provided for consistency with other classes of the * PacketElement family. 99.9% of the cases, it returns 40 (the length of the * IPv6 header). If for some reason, the internal state of the object is not * correct, OP_FAILURE (-1) is returned. */ int IPv6Header::validate(){ if( this->length!=IPv6_HEADER_LEN) return OP_FAILURE; else return IPv6_HEADER_LEN; } /* End of validate() */ /** Set Version field (4 bits). */ int IPv6Header::setVersion(u8 val){ union{ struct firstbyte{ #if WORDS_BIGENDIAN u8 ver:4; u8 tclass:4; #else u8 tclass:4; u8 ver:4; #endif }halfbyte; u8 fullbyte; }header1stbyte; header1stbyte.fullbyte = h.ip6_start[0]; header1stbyte.halfbyte.ver=val; h.ip6_start[0]=header1stbyte.fullbyte; return OP_SUCCESS; } /* End of setVersion() */ /** Set Version field to value 6. */ int IPv6Header::setVersion(){ this->setVersion(6); return OP_SUCCESS; } /* End of setVersion() */ /** Returns an 8bit number containing the value of the Version field. */ u8 IPv6Header::getVersion(){ union{ struct firstbyte{ #if WORDS_BIGENDIAN u8 ver:4; u8 tclass:4; #else u8 tclass:4; u8 ver:4; #endif }halfbyte; u8 fullbyte; }header1stbyte; header1stbyte.fullbyte = h.ip6_start[0]; return (u8)header1stbyte.halfbyte.ver; } /* End of getVersion() */ int IPv6Header::setTrafficClass(u8 val){ union{ struct firstbyte{ #if WORDS_BIGENDIAN u8 ver:4; u8 tclass1:4; #else u8 tclass1:4; u8 ver:4; #endif }halfbyte; u8 fullbyte; }header1stbyte; union{ struct firstbyte{ #if WORDS_BIGENDIAN u8 tclass2:4; u8 flow:4; #else u8 flow:4; u8 tclass2:4; #endif }halfbyte; u8 fullbyte; }header2ndbyte; /* Store old contents */ header1stbyte.fullbyte = h.ip6_start[0]; header2ndbyte.fullbyte = h.ip6_start[1]; /* Fill the two 4bit halves */ header1stbyte.halfbyte.tclass1=val>>4; header2ndbyte.halfbyte.tclass2=val; /* Write the bytes back to the header */ h.ip6_start[0]=header1stbyte.fullbyte; h.ip6_start[1]=header2ndbyte.fullbyte; return OP_SUCCESS; } /* End of setTrafficClass() */ u8 IPv6Header::getTrafficClass(){ union{ struct firstbyte{ #if WORDS_BIGENDIAN u8 ver:4; u8 tclass1:4; #else u8 tclass1:4; u8 ver:4; #endif }halfbyte; u8 fullbyte; }header1stbyte; union{ struct firstbyte{ #if WORDS_BIGENDIAN u8 tclass2:4; u8 flow:4; #else u8 flow:4; u8 tclass2:4; #endif }halfbyte; u8 fullbyte; }header2ndbyte; union{ struct firstbyte{ #if WORDS_BIGENDIAN u8 tclass1:4; u8 tclass2:4; #else u8 tclass2:4; u8 tclass1:4; #endif }halfbyte; u8 fullbyte; }finalbyte; header1stbyte.fullbyte = h.ip6_start[0]; header2ndbyte.fullbyte = h.ip6_start[1]; finalbyte.halfbyte.tclass1=header1stbyte.halfbyte.tclass1; finalbyte.halfbyte.tclass2=header2ndbyte.halfbyte.tclass2; return finalbyte.fullbyte; } /* End of getTrafficClass() */ int IPv6Header::setFlowLabel(u32 val){ u32 netbyte = htonl(val); u8 *pnt=(u8*)&netbyte; union{ struct firstbyte{ #if WORDS_BIGENDIAN u8 tclass2:4; u8 flow:4; #else u8 flow:4; u8 tclass2:4; #endif }halfbyte; u8 fullbyte; }header2ndbyte; header2ndbyte.fullbyte = h.ip6_start[1]; header2ndbyte.halfbyte.flow=pnt[1]; h.ip6_start[1]=header2ndbyte.fullbyte; h.ip6_start[2]=pnt[2]; h.ip6_start[3]=pnt[3]; return OP_SUCCESS; } /* End of setFlowLabel() */ u32 IPv6Header::getFlowLabel(){ u32 hostbyte=0; u8 *pnt=(u8*)&hostbyte; union{ struct firstbyte{ #if WORDS_BIGENDIAN u8 tclass2:4; u8 flow:4; #else u8 flow:4; u8 tclass2:4; #endif }halfbyte; u8 fullbyte; }header2ndbyte; header2ndbyte.fullbyte = h.ip6_start[1]; pnt[0]=0; pnt[1]=header2ndbyte.halfbyte.flow; pnt[2]=h.ip6_start[2]; pnt[3]=h.ip6_start[3]; hostbyte=ntohl(hostbyte); return hostbyte; } /* End of getFlowLabel() */ int IPv6Header::setPayloadLength(u16 val){ this->h.ip6_len = htons(val); return OP_SUCCESS; } /* End of setPayloadLength() */ int IPv6Header::setPayloadLength(){ int otherslen=0; if (next!=NULL) otherslen=next->getLen(); setPayloadLength( otherslen ); return OP_SUCCESS; } /* End of setTotalLength() */ u16 IPv6Header::getPayloadLength(){ return ntohs(this->h.ip6_len); } /* End of getPayloadLength() */ int IPv6Header::setNextHeader(u8 val){ this->h.ip6_nh = val; return OP_SUCCESS; } /* End of setNextHeader() */ u8 IPv6Header::getNextHeader(){ return this->h.ip6_nh; } /* End of getNextHeader() */ /** Sets field "next header" to the number that corresponds to the supplied * protocol name. Currently onyl TCP, UDP and ICMP are supported. Any * help to extend this functionality would be appreciated. For a list of all * proto names and numbers check: * http://www.iana.org/assignments/protocol-numbers/ */ int IPv6Header::setNextHeader(const char *p){ if (p==NULL){ printf("setNextProto(): NULL pointer supplied\n"); return OP_FAILURE; } if( !strcasecmp(p, "TCP") ) setNextHeader(6); /* 6=IANA number for proto TCP */ else if( !strcasecmp(p, "UDP") ) setNextHeader(17); /* 17=IANA number for proto UDP */ else if( !strcasecmp(p, "ICMP") ) setNextHeader(1); /* 1=IANA number for proto ICMP */ else outFatal(QT_3, "setNextProto(): Invalid protocol number\n"); return OP_SUCCESS; } /* End of setNextHeader() */ int IPv6Header::setHopLimit(u8 val){ this->h.ip6_hopl = val; return OP_SUCCESS; } /* End of setHopLimit() */ u8 IPv6Header::getHopLimit(){ return this->h.ip6_hopl; } /* End of getHopLimit() */ int IPv6Header::setSourceAddress(u8 *val){ if(val==NULL) outFatal(QT_3,"setSourceAddress(): NULL value supplied."); memcpy(this->h.ip6_src, val, 16); return OP_SUCCESS; } /* End of setSourceAddress() */ int IPv6Header::setSourceAddress(struct in6_addr val){ memcpy(this->h.ip6_src, val.s6_addr, 16); return OP_SUCCESS; } /* End of setSourceAddress() */ u8 *IPv6Header::getSourceAddress(){ return this->h.ip6_src; } /* End of getSourceAddress() */ int IPv6Header::setDestinationAddress(u8 *val){ if(val==NULL) outFatal(QT_3,"setDestinationAddress(): NULL value supplied."); memcpy(this->h.ip6_dst, val, 16); return OP_SUCCESS; } /* End of setDestinationAddress() */ u8 *IPv6Header::getDestinationAddress(){ return this->h.ip6_dst; } /* End of getDestinationAddress() */