/*************************************************************************** * nsock_core.c -- This contains the core engine routines for the nsock * * parallel socket event library. * * * ***********************IMPORTANT NSOCK LICENSE TERMS*********************** * * * The nsock parallel socket event library is (C) 1999-2015 Insecure.Com * * LLC This library is free software; you may redistribute and/or * * modify it under the terms of the GNU General Public License as * * published by the Free Software Foundation; Version 2. This guarantees * * your right to use, modify, and redistribute this software under certain * * conditions. If this license is unacceptable to you, Insecure.Com LLC * * may be willing to sell alternative licenses (contact * * sales@insecure.com ). * * * * As a special exception to the GPL terms, Insecure.Com LLC grants * * permission to link the code of this program with any version of the * * OpenSSL library which is distributed under a license identical to that * * listed in the included docs/licenses/OpenSSL.txt file, and distribute * * linked combinations including the two. You must obey the GNU GPL in all * * respects for all of the code used other than OpenSSL. If you modify * * this file, you may extend this exception to your version of the file, * * but you are not obligated to do so. * * * * If you received these files with a written license agreement stating * * terms other than the (GPL) terms above, then that alternative license * * agreement takes precedence over this comment. * * * * Source is provided to this software because we believe users have a * * right to know exactly what a program is going to do before they run it. * * This also allows you to audit the software for security holes. * * * * Source code also allows you to port Nmap to new platforms, fix bugs, * * and add new features. You are highly encouraged to send your changes * * to the dev@nmap.org mailing list for possible incorporation into the * * main distribution. By sending these changes to Fyodor or one of the * * Insecure.Org development mailing lists, or checking them into the Nmap * * source code repository, it is understood (unless you specify otherwise) * * that you are offering the Nmap Project (Insecure.Com LLC) the * * unlimited, non-exclusive right to reuse, modify, and relicense the * * code. Nmap will always be available Open Source, but this is important * * because the inability to relicense code has caused devastating problems * * for other Free Software projects (such as KDE and NASM). We also * * occasionally relicense the code to third parties as discussed above. * * If you wish to specify special license conditions of your * * contributions, just say so when you send them. * * * * This program is distributed in the hope that it will be useful, but * * WITHOUT ANY WARRANTY; without even the implied warranty of * * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * * General Public License v2.0 for more details * * (http://www.gnu.org/licenses/gpl-2.0.html). * * * ***************************************************************************/ /* $Id$ */ #include "nsock_internal.h" #include "gh_list.h" #include "filespace.h" #include "nsock_log.h" #include #if HAVE_ERRNO_H #include #endif #if HAVE_SYS_TYPES_H #include #endif #if HAVE_SYS_SOCKET_H #include #endif #if HAVE_NETINET_IN_H #include #endif #if HAVE_ARPA_INET_H #include #endif #if HAVE_STRING_H #include #endif #include "netutils.h" #if HAVE_PCAP #include "nsock_pcap.h" #endif /* Nsock time of day -- we update this at least once per nsock_loop round (and * after most calls that are likely to block). Other nsock files should grab * this */ struct timeval nsock_tod; /* Internal function defined in nsock_event.c * Update the nse->iod first events, assuming nse is about to be deleted */ void update_first_events(struct nevent *nse); /* Each iod has a count of pending socket reads, socket writes, and pcap reads. * When a descriptor's count is nonzero, its bit must be set in the appropriate * master fd_set, and when the count is zero the bit must be cleared. What we * are simulating is an fd_set with a counter for each socket instead of just an * on/off switch. The fd_set's bits aren't enough by itself because a descriptor * may for example have two reads pending at once, and the bit must not be * cleared after the first is completed. * The socket_count_* functions return the event to transmit to update_events() */ int socket_count_zero(struct niod *iod, struct npool *ms) { iod->readsd_count = 0; iod->writesd_count = 0; #if HAVE_PCAP iod->readpcapsd_count = 0; #endif return nsock_engine_iod_unregister(ms, iod); } static int socket_count_read_inc(struct niod *iod) { assert(iod->readsd_count >= 0); iod->readsd_count++; return EV_READ; } static int socket_count_read_dec(struct niod *iod) { assert(iod->readsd_count > 0); iod->readsd_count--; return (iod->readsd_count == 0) ? EV_READ : EV_NONE; } static int socket_count_write_inc(struct niod *iod) { assert(iod->writesd_count >= 0); iod->writesd_count++; return EV_WRITE; } static int socket_count_write_dec(struct niod *iod) { assert(iod->writesd_count > 0); iod->writesd_count--; return (iod->writesd_count == 0) ? EV_WRITE : EV_NONE; } #if HAVE_PCAP static int socket_count_readpcap_inc(struct niod *iod) { assert(iod->readpcapsd_count >= 0); iod->readpcapsd_count++; return EV_READ; } static int socket_count_readpcap_dec(struct niod *iod) { assert(iod->readpcapsd_count > 0); iod->readpcapsd_count--; return (iod->readpcapsd_count == 0) ? EV_READ : EV_NONE; } #endif #if HAVE_OPENSSL /* Call socket_count_read_dec or socket_count_write_dec on nse->iod depending on * the current value of nse->sslinfo.ssl_desire. */ static int socket_count_dec_ssl_desire(struct nevent *nse) { assert(nse->iod->ssl != NULL); assert(nse->sslinfo.ssl_desire == SSL_ERROR_WANT_READ || nse->sslinfo.ssl_desire == SSL_ERROR_WANT_WRITE); if (nse->sslinfo.ssl_desire == SSL_ERROR_WANT_READ) return socket_count_read_dec(nse->iod); else return socket_count_write_dec(nse->iod); } #endif /* Update the events that the IO engine should watch for a given IOD. * * ev_inc is a set of events for which the event counters should be increased. * These events will therefore be watched by the IO engine for this IOD. * * ev_dec is a set of events for which the event counters should be decreased. * If this counter reaches zero, the event won't be watched anymore by the * IO engine for this IOD. */ static void update_events(struct niod * iod, struct npool *ms, int ev_inc, int ev_dec) { int setmask, clrmask, ev_temp; /* Filter out events that belong to both sets. */ ev_temp = ev_inc ^ ev_dec; ev_inc = ev_inc & ev_temp; ev_dec = ev_dec & ev_temp; setmask = ev_inc; clrmask = EV_NONE; if ((ev_dec & EV_READ) && #if HAVE_PCAP !iod->readpcapsd_count && #endif !iod->readsd_count) clrmask |= EV_READ; if ((ev_dec & EV_WRITE) && !iod->writesd_count) clrmask |= EV_WRITE; if (ev_dec & EV_EXCEPT) clrmask |= EV_EXCEPT; if (!IOD_PROPGET(iod, IOD_REGISTERED)) { assert(clrmask == EV_NONE); nsock_engine_iod_register(ms, iod, setmask); } else { nsock_engine_iod_modify(ms, iod, setmask, clrmask); } } /* Add a new event for a given IOD. nevents are stored in separate event lists * (in the nsock pool) and are grouped by IOD within each list. * * This function appends the event _before_ the first similar event we have for * the given IOD, or append it to the end of the list if no similar event is * already present. * * Note that adding the event before the similar ones is important for * reentrancy, as it will prevent the new event to be processed in the event * loop just after its addition. */ static int iod_add_event(struct niod *iod, struct nevent *nse) { struct npool *nsp = iod->nsp; switch (nse->type) { case NSE_TYPE_CONNECT: case NSE_TYPE_CONNECT_SSL: if (iod->first_connect) gh_list_insert_before(&nsp->connect_events, iod->first_connect, &nse->nodeq_io); else gh_list_append(&nsp->connect_events, &nse->nodeq_io); iod->first_connect = &nse->nodeq_io; break; case NSE_TYPE_READ: if (iod->first_read) gh_list_insert_before(&nsp->read_events, iod->first_read, &nse->nodeq_io); else gh_list_append(&nsp->read_events, &nse->nodeq_io); iod->first_read = &nse->nodeq_io; break; case NSE_TYPE_WRITE: if (iod->first_write) gh_list_insert_before(&nsp->write_events, iod->first_write, &nse->nodeq_io); else gh_list_append(&nsp->write_events, &nse->nodeq_io); iod->first_write = &nse->nodeq_io; break; #if HAVE_PCAP case NSE_TYPE_PCAP_READ: { char add_read = 0, add_pcap_read = 0; #if PCAP_BSD_SELECT_HACK /* BSD hack mode: add event to both read and pcap_read lists */ add_read = add_pcap_read = 1; #else if (((mspcap *)iod->pcap)->pcap_desc >= 0) { add_read = 1; } else { add_pcap_read = 1; } #endif if (add_read) { if (iod->first_read) gh_list_insert_before(&nsp->read_events, iod->first_read, &nse->nodeq_io); else gh_list_append(&nsp->read_events, &nse->nodeq_io); iod->first_read = &nse->nodeq_io; } if (add_pcap_read) { if (iod->first_pcap_read) gh_list_insert_before(&nsp->pcap_read_events, iod->first_pcap_read, &nse->nodeq_pcap); else gh_list_append(&nsp->pcap_read_events, &nse->nodeq_pcap); iod->first_pcap_read = &nse->nodeq_pcap; } break; } #endif default: fatal("Unknown event type (%d) for IOD #%lu\n", nse->type, iod->id); } return 0; } /* A handler function is defined for each of the main event types (read, write, * connect, timer, etc) -- the handler is called when new information is * available for the event. The handler makes any necessary updates to the * event based on any new information available. If the event becomes ready for * delivery, the handler sets nse->event_done and fills out the relevant event * fields (status, errnum) as applicable. The handlers also take care of event * type specific teardown (such as clearing socket descriptors from select/poll * lists). If event_done is not set, the handler will be called again in the * case of more information or an event timeout */ /* The event type handlers -- the first three arguments of each are the same: * struct npool *ms struct nevent *nse -- the event we have new info on enum nse_status -- * The reason for the call, usually NSE_STATUS_SUCCESS (which generally means a * successful I/O call or NSE_STATUS_TIMEOUT or NSE_STATUS_CANCELLED * * Some of the event type handlers have other parameters, specific to their * needs. All the handlers can assume that the calling function has checked * that select or poll said their descriptors were readable/writeable (as * appropriate). * * The idea is that each handler will take care of the stuff that is specific * to it and the calling function will handle the stuff that can be generalized * to dispatching/deleting/etc. all events. But the calling function may use * type-specific info to determine whether the handler should be called at all * (to save CPU time). */ /* handle_connect_results assumes that select or poll have already shown the * descriptor to be active */ void handle_connect_result(struct npool *ms, struct nevent *nse, enum nse_status status) { int optval; socklen_t optlen = sizeof(int); struct niod *iod = nse->iod; #if HAVE_OPENSSL int sslerr; int rc = 0; int sslconnect_inprogress = nse->type == NSE_TYPE_CONNECT_SSL && nse->iod && (nse->sslinfo.ssl_desire == SSL_ERROR_WANT_READ || nse->sslinfo.ssl_desire == SSL_ERROR_WANT_WRITE); #else int sslconnect_inprogress = 0; #endif if (status == NSE_STATUS_TIMEOUT || status == NSE_STATUS_CANCELLED) { nse->status = status; nse->event_done = 1; } else if (sslconnect_inprogress) { /* Do nothing */ } else if (status == NSE_STATUS_SUCCESS) { /* First we want to determine whether the socket really is connected */ if (getsockopt(iod->sd, SOL_SOCKET, SO_ERROR, (char *)&optval, &optlen) != 0) optval = socket_errno(); /* Stupid Solaris */ switch (optval) { case 0: nse->status = NSE_STATUS_SUCCESS; break; /* EACCES can be caused by ICMPv6 dest-unreach-admin, or when a port is blocked by Windows Firewall (WSAEACCES). */ case EACCES: case ECONNREFUSED: case EHOSTUNREACH: case ENETDOWN: case ENETUNREACH: case ENETRESET: case ECONNABORTED: case ETIMEDOUT: case EHOSTDOWN: case ECONNRESET: #ifdef WIN32 case WSAEADDRINUSE: case WSAEADDRNOTAVAIL: #endif #ifndef WIN32 case EPIPE: /* Has been seen after connect on Linux. */ case ENOPROTOOPT: /* Also seen on Linux, perhaps in response to protocol unreachable. */ #endif nse->status = NSE_STATUS_ERROR; nse->errnum = optval; break; default: /* I'd like for someone to report it */ fatal("Strange connect error from %s (%d): %s", inet_ntop_ez(&iod->peer, iod->peerlen), optval, socket_strerror(optval)); } /* Now special code for the SSL case where the TCP connection was successful. */ if (nse->type == NSE_TYPE_CONNECT_SSL && nse->status == NSE_STATUS_SUCCESS) { #if HAVE_OPENSSL assert(ms->sslctx != NULL); /* Reuse iod->ssl if present. If set, this is the second try at connection without the SSL_OP_NO_SSLv2 option set. */ if (iod->ssl == NULL) { iod->ssl = SSL_new(ms->sslctx); if (!iod->ssl) fatal("SSL_new failed: %s", ERR_error_string(ERR_get_error(), NULL)); } #if HAVE_SSL_SET_TLSEXT_HOST_NAME if (iod->hostname != NULL) { if (SSL_set_tlsext_host_name(iod->ssl, iod->hostname) != 1) fatal("SSL_set_tlsext_host_name failed: %s", ERR_error_string(ERR_get_error(), NULL)); } #endif /* Associate our new SSL with the connected socket. It will inherit the * non-blocking nature of the sd */ if (SSL_set_fd(iod->ssl, iod->sd) != 1) fatal("SSL_set_fd failed: %s", ERR_error_string(ERR_get_error(), NULL)); /* Event not done -- need to do SSL connect below */ nse->sslinfo.ssl_desire = SSL_ERROR_WANT_CONNECT; #endif } else { /* This is not an SSL connect (in which case we are always done), or the * TCP connect() underlying the SSL failed (in which case we are also done */ nse->event_done = 1; } } else { fatal("Unknown status (%d)", status); } /* At this point the TCP connection is done, whether successful or not. * Therefore decrease the read/write listen counts that were incremented in * nsp_add_event. In the SSL case, we may increase one of the counts depending * on whether SSL_connect returns an error of SSL_ERROR_WANT_READ or * SSL_ERROR_WANT_WRITE. In that case we will re-enter this function, but we * don't want to execute this block again. */ if (iod->sd != -1 && !sslconnect_inprogress) { int ev = EV_NONE; ev |= socket_count_read_dec(iod); ev |= socket_count_write_dec(iod); ev |= EV_EXCEPT; update_events(iod, ms, EV_NONE, ev); } #if HAVE_OPENSSL if (nse->type == NSE_TYPE_CONNECT_SSL && !nse->event_done) { /* Lets now start/continue/finish the connect! */ if (iod->ssl_session) { rc = SSL_set_session(iod->ssl, iod->ssl_session); if (rc == 0) nsock_log_error(ms, "Uh-oh: SSL_set_session() failed - please tell dev@nmap.org"); iod->ssl_session = NULL; /* No need for this any more */ } /* If this is a reinvocation of handle_connect_result, clear out the listen * bits that caused it, based on the previous SSL desire. */ if (sslconnect_inprogress) { int ev; ev = socket_count_dec_ssl_desire(nse); update_events(iod, ms, EV_NONE, ev); } rc = SSL_connect(iod->ssl); if (rc == 1) { /* Woop! Connect is done! */ nse->event_done = 1; /* Check that certificate verification was okay, if requested. */ if (nsi_ssl_post_connect_verify(iod)) { nse->status = NSE_STATUS_SUCCESS; } else { nsock_log_error(ms, "certificate verification error for EID %li: %s", nse->id, ERR_error_string(ERR_get_error(), NULL)); nse->status = NSE_STATUS_ERROR; } } else { long options = SSL_get_options(iod->ssl); sslerr = SSL_get_error(iod->ssl, rc); if (rc == -1 && sslerr == SSL_ERROR_WANT_READ) { nse->sslinfo.ssl_desire = sslerr; socket_count_read_inc(iod); update_events(iod, ms, EV_READ, EV_NONE); } else if (rc == -1 && sslerr == SSL_ERROR_WANT_WRITE) { nse->sslinfo.ssl_desire = sslerr; socket_count_write_inc(iod); update_events(iod, ms, EV_WRITE, EV_NONE); } else if (!(options & SSL_OP_NO_SSLv2)) { int saved_ev; /* SSLv3-only and TLSv1-only servers can't be connected to when the * SSL_OP_NO_SSLv2 option is not set, which is the case when the pool * was initialized with nsp_ssl_init_max_speed. Try reconnecting with * SSL_OP_NO_SSLv2. Never downgrade a NO_SSLv2 connection to one that * might use SSLv2. */ nsock_log_info(ms, "EID %li reconnecting with SSL_OP_NO_SSLv2", nse->id); saved_ev = iod->watched_events; nsock_engine_iod_unregister(ms, iod); close(iod->sd); nsock_connect_internal(ms, nse, SOCK_STREAM, iod->lastproto, &iod->peer, iod->peerlen, nsi_peerport(iod)); nsock_engine_iod_register(ms, iod, saved_ev); SSL_clear(iod->ssl); if(!SSL_clear(iod->ssl)) fatal("SSL_clear failed: %s", ERR_error_string(ERR_get_error(), NULL)); SSL_set_options(iod->ssl, options | SSL_OP_NO_SSLv2); socket_count_read_inc(nse->iod); socket_count_write_inc(nse->iod); update_events(iod, ms, EV_READ|EV_WRITE, EV_NONE); nse->sslinfo.ssl_desire = SSL_ERROR_WANT_CONNECT; } else { nsock_log_info(ms, "EID %li %s", nse->id, ERR_error_string(ERR_get_error(), NULL)); nse->event_done = 1; nse->status = NSE_STATUS_ERROR; nse->errnum = EIO; } } } #endif } static int errcode_is_failure(int err) { #ifndef WIN32 return err != EINTR && err != EAGAIN && err != EBUSY; #else return err != EINTR && err != EAGAIN; #endif } void handle_write_result(struct npool *ms, struct nevent *nse, enum nse_status status) { int bytesleft; char *str; int res; int err; struct niod *iod = nse->iod; if (status == NSE_STATUS_TIMEOUT || status == NSE_STATUS_CANCELLED) { nse->event_done = 1; nse->status = status; } else if (status == NSE_STATUS_SUCCESS) { str = fs_str(&nse->iobuf) + nse->writeinfo.written_so_far; bytesleft = fs_length(&nse->iobuf) - nse->writeinfo.written_so_far; if (nse->writeinfo.written_so_far > 0) assert(bytesleft > 0); #if HAVE_OPENSSL if (iod->ssl) res = SSL_write(iod->ssl, str, bytesleft); else #endif if (nse->writeinfo.dest.ss_family == AF_UNSPEC) res = send(nse->iod->sd, str, bytesleft, 0); else res = sendto(nse->iod->sd, str, bytesleft, 0, (struct sockaddr *)&nse->writeinfo.dest, (int)nse->writeinfo.destlen); if (res == bytesleft) { nse->event_done = 1; nse->status = NSE_STATUS_SUCCESS; } else if (res >= 0) { nse->writeinfo.written_so_far += res; } else { assert(res == -1); if (iod->ssl) { #if HAVE_OPENSSL err = SSL_get_error(iod->ssl, res); if (err == SSL_ERROR_WANT_READ) { int evclr; evclr = socket_count_dec_ssl_desire(nse); socket_count_read_inc(iod); update_events(iod, ms, EV_READ, evclr); nse->sslinfo.ssl_desire = err; } else if (err == SSL_ERROR_WANT_WRITE) { int evclr; evclr = socket_count_dec_ssl_desire(nse); socket_count_write_inc(iod); update_events(iod, ms, EV_WRITE, evclr); nse->sslinfo.ssl_desire = err; } else { /* Unexpected error */ nse->event_done = 1; nse->status = NSE_STATUS_ERROR; nse->errnum = EIO; } #endif } else { err = socket_errno(); if (errcode_is_failure(err)) { nse->event_done = 1; nse->status = NSE_STATUS_ERROR; nse->errnum = err; } } } if (res >= 0) nse->iod->write_count += res; } if (nse->event_done && nse->iod->sd != -1) { int ev = EV_NONE; #if HAVE_OPENSSL if (nse->iod->ssl != NULL) ev |= socket_count_dec_ssl_desire(nse); else #endif ev |= socket_count_write_dec(nse->iod); update_events(nse->iod, ms, EV_NONE, ev); } } void handle_timer_result(struct npool *ms, struct nevent *nse, enum nse_status status) { /* Ooh this is a hard job :) */ nse->event_done = 1; nse->status = status; } /* Returns -1 if an error, otherwise the number of newly written bytes */ static int do_actual_read(struct npool *ms, struct nevent *nse) { char buf[8192]; int buflen = 0; struct niod *iod = nse->iod; int err = 0; int max_chunk = NSOCK_READ_CHUNK_SIZE; int startlen = fs_length(&nse->iobuf); if (nse->readinfo.read_type == NSOCK_READBYTES) max_chunk = nse->readinfo.num; if (!iod->ssl) { do { struct sockaddr_storage peer; socklen_t peerlen; peerlen = sizeof(peer); buflen = recvfrom(iod->sd, buf, sizeof(buf), 0, (struct sockaddr *)&peer, &peerlen); /* Using recv() was failing, at least on UNIX, for non-network sockets * (i.e. stdin) in this case, a read() is done - as on ENOTSOCK we may * have a non-network socket */ if (buflen == -1) { if (socket_errno() == ENOTSOCK) { peer.ss_family = AF_UNSPEC; peerlen = 0; buflen = read(iod->sd, buf, sizeof(buf)); } } if (buflen == -1) { err = socket_errno(); break; } if (peerlen > 0) { assert(peerlen <= sizeof(iod->peer)); memcpy(&iod->peer, &peer, peerlen); iod->peerlen = peerlen; } if (buflen > 0) { if (fs_cat(&nse->iobuf, buf, buflen) == -1) { nse->event_done = 1; nse->status = NSE_STATUS_ERROR; nse->errnum = ENOMEM; return -1; } /* Sometimes a service just spews and spews data. So we return after a * somewhat large amount to avoid monopolizing resources and avoid DOS * attacks. */ if (fs_length(&nse->iobuf) > max_chunk) return fs_length(&nse->iobuf) - startlen; /* No good reason to read again if we we were successful in the read but * didn't fill up the buffer. Especially for UDP, where we want to * return only one datagram at a time. The consistency of the above * assignment of iod->peer depends on not consolidating more than one * UDP read buffer. */ if (buflen > 0 && buflen < sizeof(buf)) return fs_length(&nse->iobuf) - startlen; } } while (buflen > 0 || (buflen == -1 && err == EINTR)); if (buflen == -1) { if (err != EINTR && err != EAGAIN) { nse->event_done = 1; nse->status = NSE_STATUS_ERROR; nse->errnum = err; return -1; } } } else { #if HAVE_OPENSSL /* OpenSSL read */ while ((buflen = SSL_read(iod->ssl, buf, sizeof(buf))) > 0) { if (fs_cat(&nse->iobuf, buf, buflen) == -1) { nse->event_done = 1; nse->status = NSE_STATUS_ERROR; nse->errnum = ENOMEM; return -1; } /* Sometimes a service just spews and spews data. So we return * after a somewhat large amount to avoid monopolizing resources * and avoid DOS attacks. */ if (fs_length(&nse->iobuf) > max_chunk) return fs_length(&nse->iobuf) - startlen; } if (buflen == -1) { err = SSL_get_error(iod->ssl, buflen); if (err == SSL_ERROR_WANT_READ) { int evclr; evclr = socket_count_dec_ssl_desire(nse); socket_count_read_inc(iod); update_events(iod, ms, EV_READ, evclr); nse->sslinfo.ssl_desire = err; } else if (err == SSL_ERROR_WANT_WRITE) { int evclr; evclr = socket_count_dec_ssl_desire(nse); socket_count_write_inc(iod); update_events(iod, ms, EV_WRITE, evclr); nse->sslinfo.ssl_desire = err; } else { /* Unexpected error */ nse->event_done = 1; nse->status = NSE_STATUS_ERROR; nse->errnum = EIO; nsock_log_info(ms, "SSL_read() failed for reason %s on NSI %li", ERR_reason_error_string(err), iod->id); return -1; } } #endif /* HAVE_OPENSSL */ } if (buflen == 0) { nse->event_done = 1; nse->eof = 1; if (fs_length(&nse->iobuf) > 0) { nse->status = NSE_STATUS_SUCCESS; return fs_length(&nse->iobuf) - startlen; } else { nse->status = NSE_STATUS_EOF; return 0; } } return fs_length(&nse->iobuf) - startlen; } void handle_read_result(struct npool *ms, struct nevent *nse, enum nse_status status) { unsigned int count; char *str; int rc, len; struct niod *iod = nse->iod; if (status == NSE_STATUS_TIMEOUT) { nse->event_done = 1; if (fs_length(&nse->iobuf) > 0) nse->status = NSE_STATUS_SUCCESS; else nse->status = NSE_STATUS_TIMEOUT; } else if (status == NSE_STATUS_CANCELLED) { nse->status = status; nse->event_done = 1; } else if (status == NSE_STATUS_SUCCESS) { rc = do_actual_read(ms, nse); /* printf("DBG: Just read %d new bytes%s.\n", rc, iod->ssl? "( SSL!)" : ""); */ if (rc > 0) { nse->iod->read_count += rc; /* We decide whether we have read enough to return */ switch (nse->readinfo.read_type) { case NSOCK_READ: nse->status = NSE_STATUS_SUCCESS; nse->event_done = 1; break; case NSOCK_READBYTES: if (fs_length(&nse->iobuf) >= nse->readinfo.num) { nse->status = NSE_STATUS_SUCCESS; nse->event_done = 1; } /* else we are not done */ break; case NSOCK_READLINES: /* Lets count the number of lines we have ... */ count = 0; len = fs_length(&nse->iobuf) -1; str = fs_str(&nse->iobuf); for (count=0; len >= 0; len--) { if (str[len] == '\n') { count++; if ((int)count >= nse->readinfo.num) break; } } if ((int) count >= nse->readinfo.num) { nse->event_done = 1; nse->status = NSE_STATUS_SUCCESS; } /* Else we are not done */ break; default: fatal("Unknown operation type (%d)", (int)nse->readinfo.read_type); } } } else { fatal("Unknown status (%d)", status); } /* If there are no more reads for this IOD, we are done reading on the socket * so we can take it off the descriptor list ... */ if (nse->event_done && iod->sd >= 0) { int ev = EV_NONE; #if HAVE_OPENSSL if (nse->iod->ssl != NULL) ev |= socket_count_dec_ssl_desire(nse); else #endif ev |= socket_count_read_dec(nse->iod); update_events(nse->iod, ms, EV_NONE, ev); } } #if HAVE_PCAP void handle_pcap_read_result(struct npool *ms, struct nevent *nse, enum nse_status status) { struct niod *iod = nse->iod; mspcap *mp = (mspcap *)iod->pcap; switch (status) { case NSE_STATUS_TIMEOUT: nse->status = NSE_STATUS_TIMEOUT; nse->event_done = 1; break; case NSE_STATUS_CANCELLED: nse->status = NSE_STATUS_CANCELLED; nse->event_done = 1; break; case NSE_STATUS_SUCCESS: /* check if we already have something read */ if (fs_length(&(nse->iobuf)) == 0) { nse->status = NSE_STATUS_TIMEOUT; nse->event_done = 0; } else { nse->status = NSE_STATUS_SUCCESS; /* we have full buffer */ nse->event_done = 1; } break; default: fatal("Unknown status (%d) for nsock event #%lu", status, nse->id); } /* If there are no more read events, we are done reading on the socket so we * can take it off the descriptor list... */ if (nse->event_done && mp->pcap_desc >= 0) { int ev; ev = socket_count_readpcap_dec(iod); update_events(iod, ms, EV_NONE, ev); } } /* Returns whether something was read */ int pcap_read_on_nonselect(struct npool *nsp) { gh_lnode_t *current, *next; struct nevent *nse; int ret = 0; for (current = gh_list_first_elem(&nsp->pcap_read_events); current != NULL; current = next) { nse = lnode_nevent2(current); if (do_actual_pcap_read(nse) == 1) { /* something received */ ret++; break; } next = gh_lnode_next(current); } return ret; } #endif /* HAVE_PCAP */ /* Here is the all important looping function that tells the event engine to * start up and begin processing events. It will continue until all events have * been delivered (including new ones started from event handlers), or the * msec_timeout is reached, or a major error has occurred. Use -1 if you don't * want to set a maximum time for it to run. A timeout of 0 will return after 1 * non-blocking loop. The nsock loop can be restarted again after it returns. * For example you could do a series of 15 second runs, allowing you to do other * stuff between them */ enum nsock_loopstatus nsock_loop(nsock_pool nsp, int msec_timeout) { struct npool *ms = (struct npool *)nsp; struct timeval loop_timeout; int msecs_left; unsigned long loopnum = 0; enum nsock_loopstatus quitstatus = NSOCK_LOOP_ERROR; gettimeofday(&nsock_tod, NULL); if (msec_timeout < -1) { ms->errnum = EINVAL; return NSOCK_LOOP_ERROR; } TIMEVAL_MSEC_ADD(loop_timeout, nsock_tod, msec_timeout); msecs_left = msec_timeout; if (msec_timeout >= 0) nsock_log_debug(ms, "nsock_loop() started (timeout=%dms). %d events pending", msec_timeout, ms->events_pending); else nsock_log_debug(ms, "nsock_loop() started (no timeout). %d events pending", ms->events_pending); while (1) { if (ms->quit) { /* We've been asked to quit the loop through nsock_loop_quit. */ ms->quit = 0; quitstatus = NSOCK_LOOP_QUIT; break; } if (ms->events_pending == 0) { /* if no events at all are pending, then none can be created until * we quit nsock_loop() -- so we do that now. */ quitstatus = NSOCK_LOOP_NOEVENTS; break; } if (msec_timeout >= 0) { msecs_left = MAX(0, TIMEVAL_MSEC_SUBTRACT(loop_timeout, nsock_tod)); if (msecs_left == 0 && loopnum > 0) { quitstatus = NSOCK_LOOP_TIMEOUT; break; } } if (nsock_engine_loop(ms, msecs_left) == -1) { quitstatus = NSOCK_LOOP_ERROR; break; } gettimeofday(&nsock_tod, NULL); /* we do this at end because there is one * at beginning of function */ loopnum++; } return quitstatus; } void process_event(struct npool *nsp, gh_list_t *evlist, struct nevent *nse, int ev) { int match_r = 0, match_w = 0; #if HAVE_OPENSSL int desire_r = 0, desire_w = 0; #endif nsock_log_debug_all(nsp, "Processing event %lu (timeout in %ldms, done=%d)", nse->id, (long)TIMEVAL_MSEC_SUBTRACT(nse->timeout, nsock_tod), nse->event_done); if (!nse->event_done) { switch (nse->type) { case NSE_TYPE_CONNECT: case NSE_TYPE_CONNECT_SSL: if (ev != EV_NONE) handle_connect_result(nsp, nse, NSE_STATUS_SUCCESS); if (event_timedout(nse)) handle_connect_result(nsp, nse, NSE_STATUS_TIMEOUT); break; case NSE_TYPE_READ: match_r = ev & EV_READ; match_w = ev & EV_WRITE; #if HAVE_OPENSSL desire_r = nse->sslinfo.ssl_desire == SSL_ERROR_WANT_READ; desire_w = nse->sslinfo.ssl_desire == SSL_ERROR_WANT_WRITE; if (nse->iod->ssl && ((desire_r && match_r) || (desire_w && match_w))) handle_read_result(nsp, nse, NSE_STATUS_SUCCESS); else #endif if (!nse->iod->ssl && match_r) handle_read_result(nsp, nse, NSE_STATUS_SUCCESS); if (event_timedout(nse)) handle_read_result(nsp, nse, NSE_STATUS_TIMEOUT); break; case NSE_TYPE_WRITE: match_r = ev & EV_READ; match_w = ev & EV_WRITE; #if HAVE_OPENSSL desire_r = nse->sslinfo.ssl_desire == SSL_ERROR_WANT_READ; desire_w = nse->sslinfo.ssl_desire == SSL_ERROR_WANT_WRITE; if (nse->iod->ssl && ((desire_r && match_r) || (desire_w && match_w))) handle_write_result(nsp, nse, NSE_STATUS_SUCCESS); else #endif if (!nse->iod->ssl && match_w) handle_write_result(nsp, nse, NSE_STATUS_SUCCESS); if (event_timedout(nse)) handle_write_result(nsp, nse, NSE_STATUS_TIMEOUT); break; case NSE_TYPE_TIMER: if (event_timedout(nse)) handle_timer_result(nsp, nse, NSE_STATUS_SUCCESS); break; #if HAVE_PCAP case NSE_TYPE_PCAP_READ:{ nsock_log_debug_all(nsp, "PCAP iterating %lu", nse->id); if (ev & EV_READ) { /* buffer empty? check it! */ if (fs_length(&(nse->iobuf)) == 0) do_actual_pcap_read(nse); } /* if already received something */ if (fs_length(&(nse->iobuf)) > 0) handle_pcap_read_result(nsp, nse, NSE_STATUS_SUCCESS); if (event_timedout(nse)) handle_pcap_read_result(nsp, nse, NSE_STATUS_TIMEOUT); #if PCAP_BSD_SELECT_HACK /* If event occurred, and we're in BSD_HACK mode, then this event was added * to two queues. read_event and pcap_read_event * Of course we should destroy it only once. * I assume we're now in read_event, so just unlink this event from * pcap_read_event */ if (((mspcap *)nse->iod->pcap)->pcap_desc >= 0 && nse->event_done && evlist == &nsp->read_events) { /* event is done, list is read_events and we're in BSD_HACK mode. * So unlink event from pcap_read_events */ update_first_events(nse); gh_list_remove(&nsp->pcap_read_events, &nse->nodeq_pcap); nsock_log_debug_all(nsp, "PCAP NSE #%lu: Removing event from PCAP_READ_EVENTS", nse->id); } if (((mspcap *)nse->iod->pcap)->pcap_desc >= 0 && nse->event_done && evlist == &nsp->pcap_read_events) { update_first_events(nse); gh_list_remove(&nsp->read_events, &nse->nodeq_io); nsock_log_debug_all(nsp, "PCAP NSE #%lu: Removing event from READ_EVENTS", nse->id); } #endif break; } #endif default: fatal("Event has unknown type (%d)", nse->type); } } if (nse->event_done) { /* Security sanity check: don't return a functional SSL iod without * setting an SSL data structure. */ if (nse->type == NSE_TYPE_CONNECT_SSL && nse->status == NSE_STATUS_SUCCESS) assert(nse->iod->ssl != NULL); nsock_log_debug_all(nsp, "NSE #%lu: Sending event", nse->id); /* WooHoo! The event is ready to be sent */ event_dispatch_and_delete(nsp, nse, 1); } } void process_iod_events(struct npool *nsp, struct niod *nsi, int ev) { int i = 0; /* store addresses of the pointers to the first elements of each kind instead * of storing the values, as a connect can add a read for instance */ gh_lnode_t **start_elems[] = { &nsi->first_connect, &nsi->first_read, &nsi->first_write, #if HAVE_PCAP &nsi->first_pcap_read, #endif NULL }; gh_list_t *evlists[] = { &nsp->connect_events, &nsp->read_events, &nsp->write_events, #if HAVE_PCAP &nsp->pcap_read_events, #endif NULL }; assert(nsp == nsi->nsp); nsock_log_debug_all(nsp, "Processing events on IOD %lu (ev=%d)", nsi->id, ev); /* We keep the events separate because we want to handle them in the * order: connect => read => write => timer for several reasons: * * 1) Makes sure we have gone through all the net i/o events before * a timer expires (would be a shame to timeout after the data was * available but before we delivered the events * * 2) The connect() results often lead to a read or write that can be * processed in the same cycle. In the same way, read() often * leads to write(). */ for (i = 0; evlists[i] != NULL; i++) { gh_lnode_t *current, *next, *last; /* for each list, get the last event and don't look past it as an event * could add another event in the same list and so on... */ last = gh_list_last_elem(evlists[i]); for (current = *start_elems[i]; current != NULL && gh_lnode_prev(current) != last; current = next) { struct nevent *nse; #if HAVE_PCAP if (evlists[i] == &nsi->nsp->pcap_read_events) nse = lnode_nevent2(current); else #endif nse = lnode_nevent(current); /* events are grouped by IOD. Break if we're done with the events for the * current IOD */ if (nse->iod != nsi) break; process_event(nsp, evlists[i], nse, ev); next = gh_lnode_next(current); if (nse->event_done) { /* event is done, remove it from the event list and update IOD pointers * to the first events of each kind */ update_first_events(nse); gh_list_remove(evlists[i], current); gh_list_append(&nsp->free_events, &nse->nodeq_io); if (nse->timeout.tv_sec) gh_heap_remove(&nsp->expirables, &nse->expire); } } } } static int nevent_unref(struct npool *nsp, struct nevent *nse) { switch (nse->type) { case NSE_TYPE_CONNECT: case NSE_TYPE_CONNECT_SSL: gh_list_remove(&nsp->connect_events, &nse->nodeq_io); break; case NSE_TYPE_READ: gh_list_remove(&nsp->read_events, &nse->nodeq_io); break; case NSE_TYPE_WRITE: gh_list_remove(&nsp->write_events, &nse->nodeq_io); break; #if HAVE_PCAP case NSE_TYPE_PCAP_READ: { char read = 0; char pcap = 0; #if PCAP_BSD_SELECT_HACK read = pcap = 1; #else if (((mspcap *)nse->iod->pcap)->pcap_desc >= 0) read = 1; else pcap = 1; #endif /* PCAP_BSD_SELECT_HACK */ if (read) gh_list_remove(&nsp->read_events, &nse->nodeq_io); if (pcap) gh_list_remove(&nsp->pcap_read_events, &nse->nodeq_pcap); break; } #endif /* HAVE_PCAP */ case NSE_TYPE_TIMER: /* Nothing to do */ break; default: fatal("Unknown event type %d", nse->type); } gh_list_append(&nsp->free_events, &nse->nodeq_io); return 0; } void process_expired_events(struct npool *nsp) { for (;;) { gh_hnode_t *hnode; struct nevent *nse; hnode = gh_heap_min(&nsp->expirables); if (!hnode) break; nse = container_of(hnode, struct nevent, expire); if (!event_timedout(nse)) break; gh_heap_pop(&nsp->expirables); process_event(nsp, NULL, nse, EV_NONE); assert(nse->event_done); update_first_events(nse); nevent_unref(nsp, nse); } } /* Calling this function will cause nsock_loop to quit on its next iteration * with a return value of NSOCK_LOOP_QUIT. */ void nsock_loop_quit(nsock_pool nsp) { struct npool *ms = (struct npool *)nsp; ms->quit = 1; } /* Grab the latest time as recorded by the nsock library, which does so at least * once per event loop (in main_loop). Not only does this function (generally) * avoid a system call, but in many circumstances it is better to use nsock's * time rather than the system time. If nsock has never obtained the time when * you call it, it will do so before returning */ const struct timeval *nsock_gettimeofday() { if (nsock_tod.tv_sec == 0) gettimeofday(&nsock_tod, NULL); return &nsock_tod; } /* Adds an event to the appropriate nsp event list, handles housekeeping such as * adjusting the descriptor select/poll lists, registering the timeout value, * etc. */ void nsp_add_event(struct npool *nsp, struct nevent *nse) { nsock_log_debug(nsp, "NSE #%lu: Adding event (timeout in %ldms)", nse->id, (long)TIMEVAL_MSEC_SUBTRACT(nse->timeout, nsock_tod)); nsp->events_pending++; if (!nse->event_done && nse->timeout.tv_sec) { /* This event is expirable, add it to the queue */ gh_heap_push(&nsp->expirables, &nse->expire); } /* Now we do the event type specific actions */ switch (nse->type) { case NSE_TYPE_CONNECT: case NSE_TYPE_CONNECT_SSL: if (!nse->event_done) { assert(nse->iod->sd >= 0); socket_count_read_inc(nse->iod); socket_count_write_inc(nse->iod); update_events(nse->iod, nsp, EV_READ|EV_WRITE|EV_EXCEPT, EV_NONE); } iod_add_event(nse->iod, nse); break; case NSE_TYPE_READ: if (!nse->event_done) { assert(nse->iod->sd >= 0); socket_count_read_inc(nse->iod); update_events(nse->iod, nsp, EV_READ, EV_NONE); #if HAVE_OPENSSL if (nse->iod->ssl) nse->sslinfo.ssl_desire = SSL_ERROR_WANT_READ; #endif } iod_add_event(nse->iod, nse); break; case NSE_TYPE_WRITE: if (!nse->event_done) { assert(nse->iod->sd >= 0); socket_count_write_inc(nse->iod); update_events(nse->iod, nsp, EV_WRITE, EV_NONE); #if HAVE_OPENSSL if (nse->iod->ssl) nse->sslinfo.ssl_desire = SSL_ERROR_WANT_WRITE; #endif } iod_add_event(nse->iod, nse); break; case NSE_TYPE_TIMER: /* nothing to do */ break; #if HAVE_PCAP case NSE_TYPE_PCAP_READ: { mspcap *mp = (mspcap *)nse->iod->pcap; assert(mp); if (mp->pcap_desc >= 0) { /* pcap descriptor present */ if (!nse->event_done) { socket_count_readpcap_inc(nse->iod); update_events(nse->iod, nsp, EV_READ, EV_NONE); } nsock_log_debug_all(nsp, "PCAP NSE #%lu: Adding event to READ_EVENTS", nse->id); #if PCAP_BSD_SELECT_HACK /* when using BSD hack we must do pcap_next() after select(). * Let's insert this pcap to bot queues, to selectable and nonselectable. * This will result in doing pcap_next_ex() just before select() */ nsock_log_debug_all(nsp, "PCAP NSE #%lu: Adding event to PCAP_READ_EVENTS", nse->id); #endif } else { /* pcap isn't selectable. Add it to pcap-specific queue. */ nsock_log_debug_all(nsp, "PCAP NSE #%lu: Adding event to PCAP_READ_EVENTS", nse->id); } iod_add_event(nse->iod, nse); break; } #endif default: fatal("Unknown nsock event type (%d)", nse->type); } /* It can happen that the event already completed. In which case we can * already deliver it, even though we're probably not inside nsock_loop(). */ if (nse->event_done) { event_dispatch_and_delete(nsp, nse, 1); update_first_events(nse); nevent_unref(nsp, nse); } } /* An event has been completed and the handler is about to be called. This * function writes out tracing data about the event if necessary */ void nsock_trace_handler_callback(struct npool *ms, struct nevent *nse) { struct niod *nsi; char *str; int strlength = 0; char displaystr[256]; char errstr[256]; if (ms->loglevel > NSOCK_LOG_INFO) return; nsi = nse->iod; if (nse->status == NSE_STATUS_ERROR) Snprintf(errstr, sizeof(errstr), "[%s (%d)] ", socket_strerror(nse->errnum), nse->errnum); else errstr[0] = '\0'; /* Some types have special tracing treatment */ switch (nse->type) { case NSE_TYPE_CONNECT: case NSE_TYPE_CONNECT_SSL: nsock_log_info(ms, "Callback: %s %s %sfor EID %li [%s]", nse_type2str(nse->type), nse_status2str(nse->status), errstr, nse->id, get_peeraddr_string(nsi)); break; case NSE_TYPE_READ: if (nse->status != NSE_STATUS_SUCCESS) { nsock_log_info(ms, "Callback: %s %s %sfor EID %li [%s]", nse_type2str(nse->type), nse_status2str(nse->status), errstr, nse->id, get_peeraddr_string(nsi)); } else { str = nse_readbuf(nse, &strlength); if (strlength < 80) { memcpy(displaystr, ": ", 2); memcpy(displaystr + 2, str, strlength); displaystr[2 + strlength] = '\0'; replacenonprintable(displaystr + 2, strlength, '.'); } else { displaystr[0] = '\0'; } nsock_log_info(ms, "Callback: %s %s for EID %li [%s] %s(%d bytes)%s", nse_type2str(nse->type), nse_status2str(nse->status), nse->id, get_peeraddr_string(nsi), nse_eof(nse) ? "[EOF]" : "", strlength, displaystr); } break; case NSE_TYPE_WRITE: nsock_log_info(ms, "Callback: %s %s %sfor EID %li [%s]", nse_type2str(nse->type), nse_status2str(nse->status), errstr, nse->id, get_peeraddr_string(nsi)); break; case NSE_TYPE_TIMER: nsock_log_info(ms, "Callback: %s %s %sfor EID %li", nse_type2str(nse->type), nse_status2str(nse->status), errstr, nse->id); break; #if HAVE_PCAP case NSE_TYPE_PCAP_READ: nsock_log_info(ms, "Callback: %s %s %sfor EID %li ", nse_type2str(nse->type), nse_status2str(nse->status), errstr, nse->id); break; #endif default: fatal("Invalid nsock event type (%d)", nse->type); } }