---
-- Common communication functions for network discovery tasks like
-- banner grabbing and data exchange.
--
-- The functions in this module return values appropriate for use with
-- exception handling via <code>nmap.new_try</code>.
--
-- These functions may be passed a table of options, but it's not required. The
-- keys for the options table are <code>"bytes"</code>, <code>"lines"</code>,
-- <code>"proto"</code>, and <code>"timeout"</code>. <code>"bytes"</code> sets
-- a minimum number of bytes to read. <code>"lines"</code> does the same for
-- lines. <code>"proto"</code> sets the protocol to communicate with,
-- defaulting to <code>"tcp"</code> if not provided. <code>"timeout"</code>
-- sets the socket timeout (see the socket function <code>set_timeout</code>
-- for details). 
--
-- If both <code>"bytes"</code> and <code>"lines"</code> are provided,
-- <code>"lines"</code> takes precedence. If neither are given, the functions
-- read as many bytes as possible.
-- @author Kris Katterjohn 04/2008
-- @copyright Same as Nmap--See http://nmap.org/book/man-legal.html

module(... or "comm", package.seeall)

require 'nsedebug'
require 'datafiles'

-- Makes sure that opts exists and the default proto is there
local initopts = function(opts)
	if not opts then
		opts = {}
	end

	if not opts.proto then
		opts.proto = "tcp"
	end

	return opts
end

-- Sets up the socket and connects to host:port
local setup_connect = function(host, port, opts)
	if type(host) ~= "table" then
		host = {ip = host}
	end

	local target = host.ip

	if type(port) ~= "table" then
		port = {number = port}
	end

	local sock = nmap.new_socket()

	if opts.timeout then
		sock:set_timeout(opts.timeout)
	end

	local status, err = sock:connect(target, port.number, opts.proto)

	if not status then
		return status, err
	end

	-- If nothing is given, specify bytes=1 so NSE reads everything
	if not opts.lines and not opts.bytes then
		opts.bytes = 1
	end

	return true, sock
end

local read = function(sock, opts)
	local response, status

	if opts.lines then
		status, response = sock:receive_lines(opts.lines)
		return status, response
	end

	status, response = sock:receive_bytes(opts.bytes)
	return status, response
end

--- This function simply connects to the specified port number on the
-- specified host and returns any data received.
--
-- The first return value is true to signal success or false to signal
-- failure. On success the second return value is the response from the
-- remote host. On failure the second return value is an error message.
-- @param host The host to connect to.
-- @param port The port on the host.
-- @param opts The options. See the module description.
-- @return Status (true or false).
-- @return Data (if status is true) or error string (if status is false).
get_banner = function(host, port, opts)
	opts = initopts(opts)
	opts.recv_before = true
	local socket, nothing, correct, banner = tryssl(host, port, "", opts)
    if socket then
      socket:close()
      return true, banner
    end
	return false, banner
end

--- This function connects to the specified port number on the specified
-- host, sends data, then waits for and returns the response, if any.
--
-- The first return value is true to signal success or false to signal
-- failure. On success the second return value is the response from the
-- remote host. On failure the second return value is an error message.
-- @param host The host to connect to.
-- @param port The port on the host.
-- @param data The data to send initially.
-- @param opts The options. See the module description.
-- @return Status (true or false).
-- @return Data (if status is true) or error string (if status is false).
exchange = function(host, port, data, opts)
	opts = initopts(opts)

	local status, sock = setup_connect(host, port, opts)
	local ret

	if not status then
		-- sock is an error message in this case
		return status, sock
	end

	status, ret = sock:send(data)

	if not status then
		sock:close()
		return status, ret
	end

	status, ret = read(sock, opts)

	sock:close()

	return status, ret
end

--- This function just checks if the provided port number is on a list
-- of ports that usually provide services with ssl
--
-- @param port_number The number of the port to check
-- @return bool True if port is usually ssl, otherwise false
local function is_ssl(port_number)
	local common_ssl_ports = {443, 465, 989, 990, 992, 993, 994, 995, 587, 6697, 6679, 8443}
	local table_size = table.maxn(common_ssl_ports)	
	local i = 0
	while i < table_size do
		if port_number == common_ssl_ports[i] then return true end
		i = i + 1
	end
	return false
end

--- This function returns best protocol order for trying  to open a 
-- conenction based on port and service information
--
-- The first value is the best option, the second is the worst
-- @param port The port table
-- @return Best option ("tcp" or "ssl")
-- @return Worst option ("tcp" or "ssl")
local function bestoption(port)
	if type(port) == 'table' then
		if port.version and port.version.service_tunnel and port.version.service_tunnel == "ssl" then return "ssl","tcp" end
		if port.version and port.version.name_confidence and port.version.name_confidence > 6 then return "tcp","ssl" end
		if is_ssl(port.number) then return "ssl","tcp" end
	elseif type(port) == 'number' then
		if is_ssl(port) then return "ssl","tcp" end
	end
	return "tcp","ssl"
end

--- This function opens a connection, sends the first data payload and
--  check if a response is correctly received (what means that the 
--  protocol used is fine)
--
-- Possible options:
-- timeout: generic timeout value
-- connect_timeout: especific timeout for connection
-- request_timeout: especific timeout for requests
-- recv_before: receive data before sending first payload
--
-- Default timeout is set to 8000.
--
-- @param ip The destination host IP
-- @param port The destination host port
-- @param protocol The protocol for the connection
-- @param data The first data payload of the connection
-- @return sd The socket descriptor, nil if no connection is estabilished
-- @return response The response received for the payload
-- @return early_resp If opt recv_before is true, returns the value
-- of the first receive (before sending data)
local function opencon(ip, port, protocol, data, opts)
	local sd = nmap.new_socket()

	-- check for connect_timeout or timeout option

	if opts and opts.connect_timeout then 
		sd:set_timeout(opts.connect_timeout)
	elseif opts and opts.timeout then
		sd:set_timeout(opts.timeout)
	else
		sd:set_timeout(8000)
	end

	local status = sd:connect(ip, port, protocol)
	if not status then 
          sd:close()
          return nil, nil, nil 
        end

	-- check for request_timeout or timeout option

	if opts and opts.request_timeout then
		sd:set_timeout(opts.request_timeout)
	elseif opts and opts.timeout then
		sd:set_timeout(opts.timeout)
	else
		sd:set_timeout(8000)
	end

    local response, early_resp;
	if opts and opts.recv_before then status, early_resp = sd:receive() end
	if #data > 0 then
		sd:send(data)
		status, response = sd:receive()
	else
		if not opts and opts.recv_before then
			nsedebug.print_debug("Using comm.tryssl without first data payload and recv_first." .. 
					     "\nImpossible to test the connection for the correct protocol!")
		end
		response = early_resp
	end
	if not status then 
          sd:close()
          return nil, response, early_resp 
        end
	return sd, response, early_resp
end

--- This function tries to open a connection based on the best
--  option about which is the correct protocol
--
--  If the best option fails, the function tries the other option
--
--  This function allows writing nse scripts in a way that the
--  API will take care of ssl issues, making failure detection
--  transparent to the programmer
--
-- @param host The host table
-- @param port The port table
-- @param data The first data payload of the connection
-- @param opts Options, such as timeout
-- @return sd The socket descriptor
-- @return response The response received for the payload
-- @return correctOpt Correct option for connection guess
-- @return earlyResp If opt recv_before is true, returns the value
-- of the first receive (before sending data)
function tryssl(host, port, data, opts)
	local opt1, opt2 = bestoption(port)
	if type(port) == 'table' then port = port.number end	
	if type(host) == 'table' then host = host.ip end
	local best = opt1
	local sd, response, early_resp = opencon(host, port, opt1, data, opts)
	if not sd then
		sd, response, early_resp = opencon(host, port, opt2, data, opts)
		best = opt2
	end
	if not sd then best = "none" end
	return sd, response, best, early_resp
end