#!/usr/bin/env python
# -*- coding: utf-8 -*-

# ***********************IMPORTANT NMAP LICENSE TERMS************************
# *                                                                         *
# * The Nmap Security Scanner is (C) 1996-2014 Insecure.Com LLC. Nmap is    *
# * also a registered trademark of Insecure.Com LLC.  This program is free  *
# * software; you may redistribute and/or modify it under the terms of the  *
# * GNU General Public License as published by the Free Software            *
# * Foundation; Version 2 ("GPL"), BUT ONLY WITH ALL OF THE CLARIFICATIONS  *
# * AND EXCEPTIONS DESCRIBED HEREIN.  This guarantees your right to use,    *
# * modify, and redistribute this software under certain conditions.  If    *
# * you wish to embed Nmap technology into proprietary software, we sell    *
# * alternative licenses (contact sales@nmap.com).  Dozens of software      *
# * vendors already license Nmap technology such as host discovery, port    *
# * scanning, OS detection, version detection, and the Nmap Scripting       *
# * Engine.                                                                 *
# *                                                                         *
# * Note that the GPL places important restrictions on "derivative works",  *
# * yet it does not provide a detailed definition of that term.  To avoid   *
# * misunderstandings, we interpret that term as broadly as copyright law   *
# * allows.  For example, we consider an application to constitute a        *
# * derivative work for the purpose of this license if it does any of the   *
# * following with any software or content covered by this license          *
# * ("Covered Software"):                                                   *
# *                                                                         *
# * o Integrates source code from Covered Software.                         *
# *                                                                         *
# * o Reads or includes copyrighted data files, such as Nmap's nmap-os-db   *
# * or nmap-service-probes.                                                 *
# *                                                                         *
# * o Is designed specifically to execute Covered Software and parse the    *
# * results (as opposed to typical shell or execution-menu apps, which will *
# * execute anything you tell them to).                                     *
# *                                                                         *
# * o Includes Covered Software in a proprietary executable installer.  The *
# * installers produced by InstallShield are an example of this.  Including *
# * Nmap with other software in compressed or archival form does not        *
# * trigger this provision, provided appropriate open source decompression  *
# * or de-archiving software is widely available for no charge.  For the    *
# * purposes of this license, an installer is considered to include Covered *
# * Software even if it actually retrieves a copy of Covered Software from  *
# * another source during runtime (such as by downloading it from the       *
# * Internet).                                                              *
# *                                                                         *
# * o Links (statically or dynamically) to a library which does any of the  *
# * above.                                                                  *
# *                                                                         *
# * o Executes a helper program, module, or script to do any of the above.  *
# *                                                                         *
# * This list is not exclusive, but is meant to clarify our interpretation  *
# * of derived works with some common examples.  Other people may interpret *
# * the plain GPL differently, so we consider this a special exception to   *
# * the GPL that we apply to Covered Software.  Works which meet any of     *
# * these conditions must conform to all of the terms of this license,      *
# * particularly including the GPL Section 3 requirements of providing      *
# * source code and allowing free redistribution of the work as a whole.    *
# *                                                                         *
# * As another special exception to the GPL terms, Insecure.Com LLC grants  *
# * permission to link the code of this program with any version of the     *
# * OpenSSL library which is distributed under a license identical to that  *
# * listed in the included docs/licenses/OpenSSL.txt file, and distribute   *
# * linked combinations including the two.                                  *
# *                                                                         *
# * Any redistribution of Covered Software, including any derived works,    *
# * must obey and carry forward all of the terms of this license, including *
# * obeying all GPL rules and restrictions.  For example, source code of    *
# * the whole work must be provided and free redistribution must be         *
# * allowed.  All GPL references to "this License", are to be treated as    *
# * including the terms and conditions of this license text as well.        *
# *                                                                         *
# * Because this license imposes special exceptions to the GPL, Covered     *
# * Work may not be combined (even as part of a larger work) with plain GPL *
# * software.  The terms, conditions, and exceptions of this license must   *
# * be included as well.  This license is incompatible with some other open *
# * source licenses as well.  In some cases we can relicense portions of    *
# * Nmap or grant special permissions to use it in other open source        *
# * software.  Please contact fyodor@nmap.org with any such requests.       *
# * Similarly, we don't incorporate incompatible open source software into  *
# * Covered Software without special permission from the copyright holders. *
# *                                                                         *
# * If you have any questions about the licensing restrictions on using     *
# * Nmap in other works, are happy to help.  As mentioned above, we also    *
# * offer alternative license to integrate Nmap into proprietary            *
# * applications and appliances.  These contracts have been sold to dozens  *
# * of software vendors, and generally include a perpetual license as well  *
# * as providing for priority support and updates.  They also fund the      *
# * continued development of Nmap.  Please email sales@nmap.com for further *
# * information.                                                            *
# *                                                                         *
# * If you have received a written license agreement or contract for        *
# * Covered Software stating terms other than these, you may choose to use  *
# * and redistribute Covered Software under those terms instead of these.   *
# *                                                                         *
# * Source is provided to this software because we believe users have a     *
# * right to know exactly what a program is going to do before they run it. *
# * This also allows you to audit the software for security holes.          *
# *                                                                         *
# * Source code also allows you to port Nmap to new platforms, fix bugs,    *
# * and add new features.  You are highly encouraged to send your changes   *
# * to the dev@nmap.org mailing list for possible incorporation into the    *
# * main distribution.  By sending these changes to Fyodor or one of the    *
# * Insecure.Org development mailing lists, or checking them into the Nmap  *
# * source code repository, it is understood (unless you specify otherwise) *
# * that you are offering the Nmap Project (Insecure.Com LLC) the           *
# * unlimited, non-exclusive right to reuse, modify, and relicense the      *
# * code.  Nmap will always be available Open Source, but this is important *
# * because the inability to relicense code has caused devastating problems *
# * for other Free Software projects (such as KDE and NASM).  We also       *
# * occasionally relicense the code to third parties as discussed above.    *
# * If you wish to specify special license conditions of your               *
# * contributions, just say so when you send them.                          *
# *                                                                         *
# * This program is distributed in the hope that it will be useful, but     *
# * WITHOUT ANY WARRANTY; without even the implied warranty of              *
# * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the Nmap      *
# * license file for more details (it's in a COPYING file included with     *
# * Nmap, and also available from https://svn.nmap.org/nmap/COPYING         *
# *                                                                         *
# ***************************************************************************/

import gtk

from zenmapGUI.higwidgets.higexpanders import HIGExpander
from zenmapGUI.higwidgets.higboxes import HIGVBox, HIGHBox,\
        hig_box_space_holder
from zenmapGUI.higwidgets.higlabels import HIGEntryLabel
from zenmapGUI.higwidgets.higtables import HIGTable
from zenmapGUI.Icons import get_os_logo, get_vulnerability_logo

import zenmapCore.I18N

na = _('Not available')


class ScanHostDetailsPage(HIGExpander):
    def __init__(self, host):
        HIGExpander.__init__(self, host.get_hostname())

        self.host_details = HostDetails(host)
        self.hbox._pack_expand_fill(self.host_details)


class HostDetails(HIGVBox):
    def __init__(self, host):
        HIGVBox.__init__(self)

        self.__create_widgets()

        self.set_os_image(get_os_logo(host))

        self.set_vulnerability_image(
                get_vulnerability_logo(host.get_open_ports()))

        self.set_host_status({'state': host.get_state(),
            'open': str(host.get_open_ports()),
            'filtered': str(host.get_filtered_ports()),
            'closed': str(host.get_closed_ports()),
            'scanned': str(host.get_scanned_ports()),
            'uptime': host.get_uptime()['seconds'],
            'lastboot': host.get_uptime()['lastboot']})

        addresses = {}
        if host.ip is not None:
            addresses['ipv4'] = host.ip['addr']
        if host.ipv6 is not None:
            addresses['ipv6'] = host.ipv6['addr']
        if host.mac is not None:
            addresses['mac'] = host.mac['addr']
        self.set_addresses(addresses)

        self.set_hostnames(host.get_hostnames())

        os = host.get_best_osmatch()
        if os:
            os['portsused'] = host.get_ports_used()

        self.set_os(os)
        self.set_tcpseq(host.get_tcpsequence())
        self.set_ipseq(host.get_ipidsequence())
        self.set_tcptsseq(host.get_tcptssequence())
        self.set_comment(host.comment)

    def __create_widgets(self):
        self.host_status_expander = gtk.Expander(
                '<b>' + _('Host Status') + '</b>')
        self.address_expander = gtk.Expander('<b>' + _('Addresses') + '</b>')
        self.hostnames_expander = gtk.Expander('<b>' + _('Hostnames') + '</b>')
        self.os_expander = gtk.Expander('<b>' + _('Operating System') + '</b>')
        self.portsused_expander = gtk.Expander(
                '<b>' + _('Ports used') + '</b>')
        self.osclass_expander = gtk.Expander('<b>' + _('OS Classes') + '</b>')
        self.tcp_expander = gtk.Expander('<b>' + _('TCP Sequence') + '</b>')
        self.ip_expander = gtk.Expander('<b>' + _('IP ID Sequence') + '</b>')
        self.tcpts_expander = gtk.Expander(
                '<b>' + _('TCP TS Sequence') + '</b>')
        self.comment_expander = gtk.Expander('<b>' + _('Comments') + '</b>')
        self.os_image = gtk.Image()
        self.vulnerability_image = gtk.Image()

        # Host Status expander
        self.host_state_label = HIGEntryLabel(_('State:'))
        self.info_host_state_label = HIGEntryLabel(na)

        self.open_label = HIGEntryLabel(_('Open ports:'))
        self.info_open_ports = HIGEntryLabel(na)

        self.filtered_label = HIGEntryLabel(_('Filtered ports:'))
        self.info_filtered_label = HIGEntryLabel(na)

        self.closed_label = HIGEntryLabel(_('Closed ports:'))
        self.info_closed_ports = HIGEntryLabel(na)

        self.scanned_label = HIGEntryLabel(_('Scanned ports:'))
        self.info_scanned_label = HIGEntryLabel(na)

        self.uptime_label = HIGEntryLabel(_('Up time:'))
        self.info_uptime_label = HIGEntryLabel(na)

        self.lastboot_label = HIGEntryLabel(_('Last boot:'))
        self.info_lastboot_label = HIGEntryLabel(na)

        # Addresses expander
        self.ipv4_label = HIGEntryLabel(_('IPv4:'))
        self.info_ipv4_label = HIGEntryLabel(na)

        self.ipv6_label = HIGEntryLabel(_('IPv6:'))
        self.info_ipv6_label = HIGEntryLabel(na)

        self.mac_label = HIGEntryLabel(_('MAC:'))
        self.info_mac_label = HIGEntryLabel(na)

        self.vendor_label = HIGEntryLabel(_('Vendor:'))
        self.info_vendor_label = HIGEntryLabel(na)

    def create_table_hbox(self):
        table = HIGTable()
        hbox = HIGHBox()

        hbox._pack_noexpand_nofill(hig_box_space_holder())
        hbox._pack_noexpand_nofill(table)

        return table, hbox

    def set_host_status(self, status):
        self.host_status_expander.set_use_markup(True)
        self.host_status_expander.set_expanded(True)
        table, hbox = self.create_table_hbox()

        if ('state' in status and
                status['state'] != ''):
            self.info_host_state_label.set_text(status['state'])

        if ('open' in status and
                status['open'] != ''):
            self.info_open_ports.set_text(status['open'])

        if ('filtered' in status and
                status['filtered'] != ''):
            self.info_filtered_label.set_text(status['filtered'])

        if ('closed' in status and
                status['closed'] != ''):
            self.info_closed_ports.set_text(status['closed'])

        if ('scanned' in status and
                status['scanned'] != ''):
            self.info_scanned_label.set_text(status['scanned'])

        if ('uptime' in status and
                status['uptime'] != ''):
            self.info_uptime_label.set_text(status['uptime'])

        if ('lastboot' in status and
                status['lastboot'] != ''):
            self.info_lastboot_label.set_text(status['lastboot'])

        table.attach(self.host_state_label, 0, 1, 0, 1)
        table.attach(self.info_host_state_label, 1, 2, 0, 1)

        table.attach(self.open_label, 0, 1, 1, 2)
        table.attach(self.info_open_ports, 1, 2, 1, 2)

        table.attach(self.filtered_label, 0, 1, 2, 3)
        table.attach(self.info_filtered_label, 1, 2, 2, 3)

        table.attach(self.closed_label, 0, 1, 3, 4)
        table.attach(self.info_closed_ports, 1, 2, 3, 4)

        table.attach(self.scanned_label, 0, 1, 4, 5)
        table.attach(self.info_scanned_label, 1, 2, 4, 5)

        table.attach(self.uptime_label, 0, 1, 5, 6)
        table.attach(self.info_uptime_label, 1, 2, 5, 6)

        table.attach(self.lastboot_label, 0, 1, 6, 7)
        table.attach(self.info_lastboot_label, 1, 2, 6, 7)

        table.attach(self.os_image, 2, 4, 0, 3, xoptions=1, yoptions=0)
        table.attach(
                self.vulnerability_image, 2, 4, 4, 7, xoptions=1, yoptions=0)

        table.set_col_spacing(1, 50)

        self.host_status_expander.add(hbox)
        self._pack_noexpand_nofill(self.host_status_expander)

    def set_os_image(self, image):
            self.os_image.set_from_stock(image, gtk.ICON_SIZE_DIALOG)

    def set_vulnerability_image(self, image):
        self.vulnerability_image.set_from_stock(image, gtk.ICON_SIZE_DIALOG)

    def set_addresses(self, address):
        self.address_expander.set_use_markup(True)
        table, hbox = self.create_table_hbox()
        self.address_expander.set_expanded(True)

        #print '>>> Address:', address
        if ('ipv4' in address and
                address['ipv4'] != 1):
            self.info_ipv4_label.set_text(address['ipv4'])

        if ('ipv6' in address and
                address['ipv6'] != 1):
            self.info_ipv6_label.set_text(address['ipv6'])

        if ('mac' in address and
                address['mac'] != 1):
            self.info_mac_label.set_text(address['mac'])

        table.attach(self.ipv4_label, 0, 1, 0, 1)
        table.attach(self.info_ipv4_label, 1, 2, 0, 1)

        table.attach(self.ipv6_label, 0, 1, 1, 2)
        table.attach(self.info_ipv6_label, 1, 2, 1, 2)

        table.attach(self.mac_label, 0, 1, 2, 3)
        table.attach(self.info_mac_label, 1, 2, 2, 3)

        self.address_expander.add(hbox)
        self._pack_noexpand_nofill(self.address_expander)

    def set_hostnames(self, hostname):
        if hostname:
            self.hostnames_expander.set_use_markup(True)
            self.hostnames_expander.set_expanded(True)
            table, hbox = self.create_table_hbox()

            y1 = 1
            y2 = 2

            for h in hostname:
                name = h.get('hostname', na)
                type = h.get('hostname_type', na)

                table.attach(HIGEntryLabel(_('Name - Type:')), 0, 1, y1, y2)
                table.attach(HIGEntryLabel(name + ' - ' + type), 1, 2, y1, y2)
                y1 += 1
                y2 += 1

            self.hostnames_expander.add(hbox)
            self._pack_noexpand_nofill(self.hostnames_expander)

    def set_os(self, os):
        if os:
            self.os_expander.set_use_markup(True)
            self.os_expander.set_expanded(True)
            table, hbox = self.create_table_hbox()
            progress = gtk.ProgressBar()

            if 'accuracy' in os:
                progress.set_fraction(float(os['accuracy']) / 100.0)
                progress.set_text(os['accuracy'] + '%')
            else:
                progress.set_text(_('Not Available'))

            table.attach(HIGEntryLabel(_('Name:')), 0, 1, 0, 1)
            table.attach(HIGEntryLabel(os['name']), 1, 2, 0, 1)

            table.attach(HIGEntryLabel(_('Accuracy:')), 0, 1, 1, 2)
            table.attach(progress, 1, 2, 1, 2)

            y1 = 2
            y2 = 3

            if 'portsused' in os:
                self.set_ports_used(os['portsused'])
                table.attach(self.portsused_expander, 0, 2, y1, y2)
                y1 += 1
                y2 += 1

            if 'osclasses' in os:
                self.set_osclass(os['osclasses'])
                self.osclass_expander.set_use_markup(True)
                table.attach(self.osclass_expander, 0, 2, y1, y2)

            self.os_expander.add(hbox)
            self._pack_noexpand_nofill(self.os_expander)

    def set_ports_used(self, ports):
        self.portsused_expander.set_use_markup(True)
        table, hbox = self.create_table_hbox()

        y1 = 0
        y2 = 1

        for p in ports:
            table.attach(HIGEntryLabel(
                _('Port-Protocol-State:')), 0, 1, y1, y2)
            table.attach(HIGEntryLabel(
                p['portid'] + ' - ' + p['proto'] + ' - ' + p['state']
                ), 1, 2, y1, y2)
            y1 += 1
            y2 += 1

        self.portsused_expander.add(hbox)

    def set_osclass(self, osclass):
        if osclass:
            self.osclass_expander.set_use_markup(True)
            table, hbox = self.create_table_hbox()

            table.attach(HIGEntryLabel(_('Type')), 0, 1, 0, 1)
            table.attach(HIGEntryLabel(_('Vendor')), 1, 2, 0, 1)
            table.attach(HIGEntryLabel(_('OS Family')), 2, 3, 0, 1)
            table.attach(HIGEntryLabel(_('OS Generation')), 3, 4, 0, 1)
            table.attach(HIGEntryLabel(_('Accuracy')), 4, 5, 0, 1)

            y1 = 1
            y2 = 2

            for o in osclass:
                table.attach(HIGEntryLabel(o['type']), 0, 1, y1, y2)
                table.attach(HIGEntryLabel(o['vendor']), 1, 2, y1, y2)
                table.attach(HIGEntryLabel(o['osfamily']), 2, 3, y1, y2)
                table.attach(HIGEntryLabel(o['osgen']), 3, 4, y1, y2)

                progress = gtk.ProgressBar()
                progress.set_text(o['accuracy'] + '%')
                progress.set_fraction(float(o['accuracy']) / 100.0)
                table.attach(progress, 4, 5, y1, y2)
                y1 += 1
                y2 += 1

            self.osclass_expander.add(hbox)

    def set_tcpseq(self, tcpseq):
        if tcpseq:
            self.tcp_expander.set_use_markup(True)
            table, hbox = self.create_table_hbox()

            combo = gtk.combo_box_new_text()
            for v in tcpseq['values'].split(','):
                combo.append_text(v)

            table.attach(HIGEntryLabel(_('Difficulty:')), 0, 1, 1, 2)
            table.attach(HIGEntryLabel(tcpseq['difficulty']), 1, 2, 1, 2)

            table.attach(HIGEntryLabel(_('Index:')), 0, 1, 2, 3)
            table.attach(HIGEntryLabel(tcpseq['index']), 1, 2, 2, 3)

            table.attach(HIGEntryLabel(_('Values:')), 0, 1, 3, 4)
            table.attach(combo, 1, 2, 3, 4)

            self.tcp_expander.add(hbox)
            self._pack_noexpand_nofill(self.tcp_expander)

    def set_ipseq(self, ipseq):
        if ipseq:
            self.ip_expander.set_use_markup(True)
            table, hbox = self.create_table_hbox()

            combo = gtk.combo_box_new_text()

            for i in ipseq['values'].split(','):
                combo.append_text(i)

            table.attach(HIGEntryLabel(_('Class:')), 0, 1, 0, 1)
            table.attach(HIGEntryLabel(ipseq['class']), 1, 2, 0, 1)

            table.attach(HIGEntryLabel(_('Values:')), 0, 1, 1, 2)
            table.attach(combo, 1, 2, 1, 2)

            self.ip_expander.add(hbox)
            self._pack_noexpand_nofill(self.ip_expander)

    def set_tcptsseq(self, tcptsseq):
        if tcptsseq:
            self.tcpts_expander.set_use_markup(True)
            table, hbox = self.create_table_hbox()

            combo = gtk.combo_box_new_text()

            for i in tcptsseq['values'].split(','):
                combo.append_text(i)

            table.attach(HIGEntryLabel(_('Class:')), 0, 1, 0, 1)
            table.attach(HIGEntryLabel(tcptsseq['class']), 1, 2, 0, 1)

            table.attach(HIGEntryLabel(_('Values:')), 0, 1, 1, 2)
            table.attach(combo, 1, 2, 1, 2)

            self.tcpts_expander.add(hbox)
            self._pack_noexpand_nofill(self.tcpts_expander)

    def set_comment(self, comment=''):
        self.comment_expander.set_use_markup(True)
        if comment:
            self.comment_expander.set_expanded(True)

        hbox = HIGHBox()

        self.comment_scrolled = gtk.ScrolledWindow()
        self.comment_scrolled.set_border_width(5)
        self.comment_scrolled.set_policy(
                gtk.POLICY_AUTOMATIC, gtk.POLICY_AUTOMATIC)

        self.comment_txt_vw = gtk.TextView()
        self.comment_txt_vw.set_wrap_mode(gtk.WRAP_WORD)
        self.comment_txt_vw.get_buffer().set_text(comment)

        self.comment_scrolled.add(self.comment_txt_vw)
        hbox._pack_expand_fill(self.comment_scrolled)

        self.comment_expander.add(hbox)
        self._pack_noexpand_nofill(self.comment_expander)

    def get_comment(self):
        buffer = self.comment_txt_vw.get_buffer()
        return buffer.get_text(buffer.get_start_iter(), buffer.get_end_iter())