#!/usr/bin/env python
# -*- coding: utf-8 -*-

# ***********************IMPORTANT NMAP LICENSE TERMS************************
# *                                                                         *
# * The Nmap Security Scanner is (C) 1996-2013 Insecure.Com LLC. Nmap is    *
# * also a registered trademark of Insecure.Com LLC.  This program is free  *
# * software; you may redistribute and/or modify it under the terms of the  *
# * GNU General Public License as published by the Free Software            *
# * Foundation; Version 2 ("GPL"), BUT ONLY WITH ALL OF THE CLARIFICATIONS  *
# * AND EXCEPTIONS DESCRIBED HEREIN.  This guarantees your right to use,    *
# * modify, and redistribute this software under certain conditions.  If    *
# * you wish to embed Nmap technology into proprietary software, we sell    *
# * alternative licenses (contact sales@nmap.com).  Dozens of software      *
# * vendors already license Nmap technology such as host discovery, port    *
# * scanning, OS detection, version detection, and the Nmap Scripting       *
# * Engine.                                                                 *
# *                                                                         *
# * Note that the GPL places important restrictions on "derivative works",  *
# * yet it does not provide a detailed definition of that term.  To avoid   *
# * misunderstandings, we interpret that term as broadly as copyright law   *
# * allows.  For example, we consider an application to constitute a        *
# * derivative work for the purpose of this license if it does any of the   *
# * following with any software or content covered by this license          *
# * ("Covered Software"):                                                   *
# *                                                                         *
# * o Integrates source code from Covered Software.                         *
# *                                                                         *
# * o Reads or includes copyrighted data files, such as Nmap's nmap-os-db   *
# * or nmap-service-probes.                                                 *
# *                                                                         *
# * o Is designed specifically to execute Covered Software and parse the    *
# * results (as opposed to typical shell or execution-menu apps, which will *
# * execute anything you tell them to).                                     *
# *                                                                         *
# * o Includes Covered Software in a proprietary executable installer.  The *
# * installers produced by InstallShield are an example of this.  Including *
# * Nmap with other software in compressed or archival form does not        *
# * trigger this provision, provided appropriate open source decompression  *
# * or de-archiving software is widely available for no charge.  For the    *
# * purposes of this license, an installer is considered to include Covered *
# * Software even if it actually retrieves a copy of Covered Software from  *
# * another source during runtime (such as by downloading it from the       *
# * Internet).                                                              *
# *                                                                         *
# * o Links (statically or dynamically) to a library which does any of the  *
# * above.                                                                  *
# *                                                                         *
# * o Executes a helper program, module, or script to do any of the above.  *
# *                                                                         *
# * This list is not exclusive, but is meant to clarify our interpretation  *
# * of derived works with some common examples.  Other people may interpret *
# * the plain GPL differently, so we consider this a special exception to   *
# * the GPL that we apply to Covered Software.  Works which meet any of     *
# * these conditions must conform to all of the terms of this license,      *
# * particularly including the GPL Section 3 requirements of providing      *
# * source code and allowing free redistribution of the work as a whole.    *
# *                                                                         *
# * As another special exception to the GPL terms, Insecure.Com LLC grants  *
# * permission to link the code of this program with any version of the     *
# * OpenSSL library which is distributed under a license identical to that  *
# * listed in the included docs/licenses/OpenSSL.txt file, and distribute   *
# * linked combinations including the two.                                  *
# *                                                                         *
# * Any redistribution of Covered Software, including any derived works,    *
# * must obey and carry forward all of the terms of this license, including *
# * obeying all GPL rules and restrictions.  For example, source code of    *
# * the whole work must be provided and free redistribution must be         *
# * allowed.  All GPL references to "this License", are to be treated as    *
# * including the terms and conditions of this license text as well.        *
# *                                                                         *
# * Because this license imposes special exceptions to the GPL, Covered     *
# * Work may not be combined (even as part of a larger work) with plain GPL *
# * software.  The terms, conditions, and exceptions of this license must   *
# * be included as well.  This license is incompatible with some other open *
# * source licenses as well.  In some cases we can relicense portions of    *
# * Nmap or grant special permissions to use it in other open source        *
# * software.  Please contact fyodor@nmap.org with any such requests.       *
# * Similarly, we don't incorporate incompatible open source software into  *
# * Covered Software without special permission from the copyright holders. *
# *                                                                         *
# * If you have any questions about the licensing restrictions on using     *
# * Nmap in other works, are happy to help.  As mentioned above, we also    *
# * offer alternative license to integrate Nmap into proprietary            *
# * applications and appliances.  These contracts have been sold to dozens  *
# * of software vendors, and generally include a perpetual license as well  *
# * as providing for priority support and updates.  They also fund the      *
# * continued development of Nmap.  Please email sales@nmap.com for further *
# * information.                                                            *
# *                                                                         *
# * If you have received a written license agreement or contract for        *
# * Covered Software stating terms other than these, you may choose to use  *
# * and redistribute Covered Software under those terms instead of these.   *
# *                                                                         *
# * Source is provided to this software because we believe users have a     *
# * right to know exactly what a program is going to do before they run it. *
# * This also allows you to audit the software for security holes (none     *
# * have been found so far).                                                *
# *                                                                         *
# * Source code also allows you to port Nmap to new platforms, fix bugs,    *
# * and add new features.  You are highly encouraged to send your changes   *
# * to the dev@nmap.org mailing list for possible incorporation into the    *
# * main distribution.  By sending these changes to Fyodor or one of the    *
# * Insecure.Org development mailing lists, or checking them into the Nmap  *
# * source code repository, it is understood (unless you specify otherwise) *
# * that you are offering the Nmap Project (Insecure.Com LLC) the           *
# * unlimited, non-exclusive right to reuse, modify, and relicense the      *
# * code.  Nmap will always be available Open Source, but this is important *
# * because the inability to relicense code has caused devastating problems *
# * for other Free Software projects (such as KDE and NASM).  We also       *
# * occasionally relicense the code to third parties as discussed above.    *
# * If you wish to specify special license conditions of your               *
# * contributions, just say so when you send them.                          *
# *                                                                         *
# * This program is distributed in the hope that it will be useful, but     *
# * WITHOUT ANY WARRANTY; without even the implied warranty of              *
# * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the Nmap      *
# * license file for more details (it's in a COPYING file included with     *
# * Nmap, and also available from https://svn.nmap.org/nmap/COPYING         *
# *                                                                         *
# ***************************************************************************/

import errno
import gtk
import gobject
import os
import time

# Prevent loading PyXML
import xml
xml.__path__ = [x for x in xml.__path__ if "_xmlplus" not in x]

import xml.sax

from zenmapGUI.higwidgets.hignotebooks import HIGNotebook, HIGAnimatedTabLabel
from zenmapGUI.higwidgets.higboxes import HIGVBox, HIGHBox
from zenmapGUI.higwidgets.higdialogs import HIGAlertDialog, HIGDialog
from zenmapGUI.higwidgets.higscrollers import HIGScrolledWindow
from zenmapGUI.higwidgets.higlabels import HIGSectionLabel

from zenmapGUI.FilterBar import FilterBar
from zenmapGUI.ScanHostDetailsPage import ScanHostDetailsPage
from zenmapGUI.ScanToolbar import ScanCommandToolbar, ScanToolbar
from zenmapGUI.ScanHostsView import ScanHostsView
from zenmapGUI.ScanOpenPortsPage import ScanOpenPortsPage
from zenmapGUI.ScanRunDetailsPage import ScanRunDetailsPage
from zenmapGUI.ScanNmapOutputPage import ScanNmapOutputPage
from zenmapGUI.ScanScanListPage import ScanScanListPage
from zenmapGUI.ScansListStore import ScansListStore
from zenmapGUI.TopologyPage import TopologyPage

from zenmapCore.NetworkInventory import NetworkInventory,\
        FilteredNetworkInventory
from zenmapCore.NmapCommand import NmapCommand
from zenmapCore.UmitConf import CommandProfile, ProfileNotFound, is_maemo
from zenmapCore.NmapParser import NmapParser
from zenmapCore.Paths import Path, get_extra_executable_search_paths
from zenmapCore.UmitLogging import log
from zenmapCore.NmapOptions import NmapOptions, split_quoted, join_quoted
import zenmapCore.I18N

# How often the live output view refreshes, in milliseconds.
NMAP_OUTPUT_REFRESH_INTERVAL = 1000


class ScanInterface(HIGVBox):
    """ScanInterface contains the scan toolbar and the scan results. Each
    ScanInterface represents a single NetworkInventory as well as a set of
    running scans."""

    # The time delay between when you stop typing a filter string and filtering
    # actually begins, in milliseconds.
    FILTER_DELAY = 1000

    def __init__(self):
        HIGVBox.__init__(self)

        # The borders are consuming too much space on Maemo. Setting it to
        # 0 pixels while on Maemo
        if is_maemo():
            self.set_border_width(0)

        self.set_spacing(0)

        # True if nothing has happened here page yet, i.e., it's okay to load a
        # scan from a file here.
        self.empty = True

        # The most recent name the inventory on this page has been saved under.
        self.saved_filename = None

        # The network inventory shown by this page. It may consist of multiple
        # scans.
        self.inventory = FilteredNetworkInventory()

        # The list of currently running scans (NmapCommand objects).
        self.jobs = []

        # The list of running and finished scans shown on the Nmap Output page.
        self.scans_store = ScansListStore()

        self.top_box = HIGVBox()

        self.__create_toolbar()
        self.__create_command_toolbar()

        self.select_default_profile()

        self.scan_result = ScanResult(self.inventory, self.scans_store,
                                      scan_interface=self)
        self.host_view_selection = self.scan_result.get_host_selection()
        self.service_view_selection = self.scan_result.get_service_selection()
        self.host_view_selection.connect(
                'changed', self.host_selection_changed)
        self.service_view_selection.connect(
                'changed', self.service_selection_changed)
        host_page = self.scan_result.scan_result_notebook.open_ports.host
        host_page.host_view.get_selection().connect(
                'changed', self.service_host_selection_changed)
        self.host_view_selection.connect(
                'changed', self.host_selection_changed)

        self.scan_result.scan_result_notebook.nmap_output.connect(
                "changed", self._displayed_scan_change_cb)
        self.scan_result.scan_result_notebook.scans_list.remove_button.connect(
                "clicked", self._remove_scan_cb)

        # The hosts dict maps hostnames (as returned by HostInfo.get_hostname)
        # to HostInfo objects.
        self.hosts = {}
        # The services dict maps service names ("http") to lists of dicts of
        # the form
        # {'host': <HostInfo object>, 'hostname': u'example.com',
        #  'port_state': u'open', 'portid': u'22', 'protocol': u'tcp',
        #  'service_conf': u'10', 'service_extrainfo': u'protocol 2.0',
        #  'service_method': u'probed', 'service_name': u'ssh',
        #  'service_product': u'OpenSSH', 'service_version': u'4.3'}
        # In other words each dict has the same keys as an entry in
        # HostInfo.ports, with the addition of "host" and "hostname" keys.
        self.services = {}

        self.top_box.set_border_width(6)
        self.top_box.set_spacing(5)

        self.top_box._pack_noexpand_nofill(self.toolbar)
        self.top_box._pack_noexpand_nofill(self.command_toolbar)

        self._pack_noexpand_nofill(self.top_box)
        self._pack_expand_fill(self.scan_result)

        self.scan_result.scan_result_notebook.scans_list.cancel_button.connect(
                "clicked", self._cancel_scans_list_cb)
        self.update_cancel_button()

        # Create the filter GUI
        self.filter_bar = FilterBar()
        self.pack_start(self.filter_bar, False, True, 0)
        self.filter_bar.set_no_show_all(True)

        self.filter_timeout_id = None

        self.filter_bar.connect("changed", self.filter_changed)
        self.scan_result.filter_toggle_button.connect("toggled",
            self.filter_toggle_toggled)
        self.scan_result.filter_toggle_button.show()

    def toggle_filter_bar(self):
        self.scan_result.filter_toggle_button.clicked()

    def filter_toggle_toggled(self, widget):
        if self.scan_result.filter_toggle_button.get_active():
            # Show the filter bar
            self.filter_bar.show()
            self.filter_bar.grab_focus()
            self.filter_hosts(self.filter_bar.get_filter_string())
        else:
            # Hide the filter bar
            self.filter_bar.hide()
            self.filter_hosts("")

        self.update_ui()

    def filter_changed(self, filter_bar):
        # Restart the timer to start the filter.
        if self.filter_timeout_id:
            gobject.source_remove(self.filter_timeout_id)
        self.filter_timeout_id = gobject.timeout_add(
                self.FILTER_DELAY, self.filter_hosts,
                filter_bar.get_filter_string())

    def filter_hosts(self, filter_string):
        start = time.clock()
        self.inventory.apply_filter(filter_string)
        filter_time = time.clock() - start
        # Update the gui
        start = time.clock()
        self.update_ui()
        gui_time = time.clock() - start

        if filter_time + gui_time > 0.0:
            log.debug("apply_filter %g ms  update_ui %g ms (%.0f%% filter)" %
                (filter_time * 1000.0, gui_time * 1000.0,
                100.0 * filter_time / (filter_time + gui_time)))

        self.filter_timeout_id = None
        return False

    def is_changed(self):
        """Return true if this window has unsaved changes."""
        for scan in self.inventory.get_scans():
            if scan.unsaved:
                return True
        return False
    changed = property(is_changed)

    def num_scans_running(self):
        return len(self.jobs)

    def select_default_profile(self):
        """Select a "default" profile. Currently this is defined to be the
        first profile."""
        if len(self.toolbar.profile_entry.get_model()) > 0:
            self.toolbar.profile_entry.set_active(0)

    def go_to_host(self, hostname):
        """Scroll the text output to the appearance of the named host."""
        self.scan_result.scan_result_notebook.nmap_output.nmap_output.go_to_host(hostname)

    def __create_toolbar(self):
        self.toolbar = ScanToolbar()

        self.target_entry_changed_handler = self.toolbar.target_entry.connect(
                'changed', self._target_entry_changed)
        self.profile_entry_changed_handler = \
            self.toolbar.profile_entry.connect(
                    'changed', self._profile_entry_changed)

        self.toolbar.scan_button.connect('clicked', self.start_scan_cb)
        self.toolbar.cancel_button.connect('clicked', self._cancel_scan_cb)

    def __create_command_toolbar(self):
        self.command_toolbar = ScanCommandToolbar()
        self.command_toolbar.command_entry.connect(
                'activate', lambda x: self.toolbar.scan_button.clicked())
        self.command_entry_changed_handler = \
            self.command_toolbar.command_entry.connect(
                    'changed', self._command_entry_changed)

    def _command_entry_changed(self, editable):
        ops = NmapOptions()
        ops.parse_string(self.command_toolbar.get_command())

        # Set the target and profile without propagating the "changed" signal
        # back to the command entry.
        self.set_target_quiet(join_quoted(ops.target_specs))
        self.set_profile_name_quiet("")

    def _target_entry_changed(self, editable):
        target_string = self.toolbar.get_selected_target()
        targets = split_quoted(target_string)

        ops = NmapOptions()
        ops.parse_string(self.command_toolbar.get_command())
        ops.target_specs = targets
        self.set_command_quiet(ops.render_string())

    def _profile_entry_changed(self, widget):
        """Update the command based on the contents of the target and profile
        entries. If the command corresponding to the current profile is not
        blank, use it. Otherwise use the current contents of the command
        entry."""
        profile_name = self.toolbar.get_selected_profile()
        target_string = self.toolbar.get_selected_target()

        cmd_profile = CommandProfile()
        command_string = cmd_profile.get_command(profile_name)
        del(cmd_profile)
        if command_string == "":
            command_string = self.command_toolbar.get_command()

        ops = NmapOptions()
        ops.parse_string(command_string)

        # Use the targets from the command entry, if there are any, otherwise
        # use any targets from the profile.
        targets = split_quoted(target_string)
        if len(targets) > 0:
            ops.target_specs = targets
        else:
            self.toolbar.set_selected_target(join_quoted(ops.target_specs))

        self.set_command_quiet(ops.render_string())

    def set_command_quiet(self, command_string):
        """Set the command used by this scan interface, ignoring any further
        "changed" signals."""
        self.command_toolbar.command_entry.handler_block(
                self.command_entry_changed_handler)
        self.command_toolbar.set_command(command_string)
        self.command_toolbar.command_entry.handler_unblock(
                self.command_entry_changed_handler)

    def set_target_quiet(self, target_string):
        """Set the target string used by this scan interface, ignoring any
        further "changed" signals."""
        self.toolbar.target_entry.handler_block(
                self.target_entry_changed_handler)
        self.toolbar.set_selected_target(target_string)
        self.toolbar.target_entry.handler_unblock(
                self.target_entry_changed_handler)

    def set_profile_name_quiet(self, profile_name):
        """Set the profile name used by this scan interface, ignoring any
        further "changed" signals."""
        self.toolbar.profile_entry.handler_block(
                self.profile_entry_changed_handler)
        self.toolbar.set_selected_profile(profile_name)
        self.toolbar.profile_entry.handler_unblock(
                self.profile_entry_changed_handler)

    def start_scan_cb(self, widget=None):
        target = self.toolbar.selected_target
        command = self.command_toolbar.command
        profile = self.toolbar.selected_profile

        log.debug(">>> Start Scan:")
        log.debug(">>> Target: '%s'" % target)
        log.debug(">>> Profile: '%s'" % profile)
        log.debug(">>> Command: '%s'" % command)

        if target != '':
            try:
                self.toolbar.add_new_target(target)
            except IOError, e:
                # We failed to save target_list.txt; treat it as read-only.
                # Probably it's owned by root and this is a normal user.
                log.debug(">>> Error saving %s: %s" % (
                    Path.target_list, str(e)))

        if command == '':
            warn_dialog = HIGAlertDialog(
                    message_format=_("Empty Nmap Command"),
                    secondary_text=_("There is no command to execute. "
                        "Maybe the selected/typed profile doesn't exist. "
                        "Please check the profile name or type the nmap "
                        "command you would like to execute."),
                    type=gtk.MESSAGE_ERROR)
            warn_dialog.run()
            warn_dialog.destroy()
            return

        self.execute_command(command, target, profile)

    def _displayed_scan_change_cb(self, widget):
        self.update_cancel_button()

    def update_cancel_button(self):
        """Make the Cancel button sensitive or not depending on whether the
        currently displayed scan is running."""
        entry = self.scan_result.scan_result_notebook.nmap_output.get_active_entry()
        if entry is None:
            self.toolbar.cancel_button.set_sensitive(False)
        else:
            self.toolbar.cancel_button.set_sensitive(entry.running)

    def _cancel_scan_cb(self, widget):
        """Cancel the scan whose output is shown."""
        entry = self.scan_result.scan_result_notebook.nmap_output.get_active_entry()
        if entry is not None and entry.running:
            self.cancel_scan(entry.command)

    def _cancel_scans_list_cb(self, widget):
        """This is like _cancel_scan_cb, but it cancels the scans that are
        currently selected in the scans list, not the one whose output is
        currently shown."""
        model, selection = self.scan_result.scan_result_notebook.scans_list.scans_list.get_selection().get_selected_rows()
        for path in selection:
            entry = model.get_value(model.get_iter(path), 0)
            if entry.running:
                self.cancel_scan(entry.command)

    def _remove_scan_cb(self, widget):
        model, selection = self.scan_result.scan_result_notebook.scans_list.scans_list.get_selection().get_selected_rows()
        selected_refs = []
        for path in selection:
            # Kill running scans and remove finished scans from the inventory.
            entry = model.get_value(model.get_iter(path), 0)
            if entry.running:
                self.cancel_scan(entry.command)
            try:
                # Remove it from the inventory if present.
                self.inventory.remove_scan(entry.parsed)
            except ValueError:
                pass
            # Create TreeRowReferences because those persist while we change
            # the model.
            selected_refs.append(gtk.TreeRowReference(model, path))
        # Delete the entries from the ScansListStore.
        for ref in selected_refs:
            model.remove(model.get_iter(ref.get_path()))
        self.update_ui()

    def collect_umit_info(self, command, parsed):
        profile = CommandProfile()
        profile_name = command.profile

        parsed.profile_name = profile_name
        parsed.nmap_command = command.command

        del(profile)

    def kill_all_scans(self):
        """Kill all running scans."""
        for scan in self.jobs:
            try:
                scan.kill()
            except AttributeError:
                pass
        del self.jobs[:]

    def cancel_scan(self, command):
        """Cancel a running scan."""
        self.scans_store.cancel_running_scan(command)
        command.kill()
        self.jobs.remove(command)
        self.update_cancel_button()

    def execute_command(self, command, target=None, profile=None):
        """Run the given Nmap command. Add it to the list of running scans.
        Schedule a timer to refresh the output and check the scan for
        completion."""
        command_execution = NmapCommand(command)
        command_execution.profile = profile

        try:
            command_execution.run_scan()
        except Exception, e:
            text = str(e)
            if isinstance(e, OSError):
                # Handle ENOENT specially.
                if e.errno == errno.ENOENT:
                    # nmap_command_path comes from zenmapCore.NmapCommand.
                    text += "\n\n%s\n\n%s" % (
                            _("This means that the nmap executable was "
                                "not found in your system PATH, which is"),
                            os.getenv("PATH", _("<undefined>"))
                            )
                    path_env = os.getenv("PATH")
                    if path_env is None:
                        default_paths = []
                    else:
                        default_paths = path_env.split(os.pathsep)
                    extra_paths = get_extra_executable_search_paths()
                    extra_paths = [p for p in extra_paths if (
                        p not in default_paths)]
                    if len(extra_paths) > 0:
                        if len(extra_paths) == 1:
                            text += "\n\n" + _("plus the extra directory")
                        else:
                            text += "\n\n" + _("plus the extra directories")
                        text += "\n\n" + os.pathsep.join(extra_paths)
            warn_dialog = HIGAlertDialog(
                message_format=_("Error executing command"),
                secondary_text=text, type=gtk.MESSAGE_ERROR)
            warn_dialog.run()
            warn_dialog.destroy()
            return

        log.debug("Running command: %s" % command_execution.command)
        self.jobs.append(command_execution)

        i = self.scans_store.add_running_scan(command_execution)
        self.scan_result.scan_result_notebook.nmap_output.set_active_iter(i)

        # When scan starts, change to nmap output view tab and refresh output
        self.scan_result.change_to_nmap_output_tab()
        self.scan_result.refresh_nmap_output()

        # Add a timeout function
        self.verify_thread_timeout_id = gobject.timeout_add(
            NMAP_OUTPUT_REFRESH_INTERVAL, self.verify_execution)

    def verify_execution(self):
        """This is a callback that is called periodically to refresh the output
        check whether any running scans have finished. The timer that schedules
        the callback is started in execute_command. When there are no more
        running scans, this function returns True so that it won't be scheduled
        again."""
        self.scan_result.refresh_nmap_output()

        finished_jobs = []
        for scan in self.jobs:
            try:
                alive = scan.scan_state()
                if alive:
                    continue
            except:
                log.debug("Scan terminated unexpectedly: %s" % scan.command)
                self.scans_store.fail_running_scan(scan)
            else:
                log.debug("Scan finished: %s" % scan.command)
                self.load_from_command(scan)
                scan.close()
            self.update_cancel_button()
            finished_jobs.append(scan)

        # Remove finished jobs from the job list
        for finished in finished_jobs:
            self.jobs.remove(finished)
        del(finished_jobs)

        return len(self.jobs) != 0

    def load_from_command(self, command):
        """Load scan results from a completed NmapCommand."""
        parsed = NmapParser()
        try:
            parsed.parse_file(command.get_xml_output_filename())
        except IOError, e:
            # It's possible to run Nmap without generating an XML output file,
            # like with "nmap -V".
            if e.errno != errno.ENOENT:
                raise
        except xml.sax.SAXParseException, e:
            try:
                # Some options like --iflist cause Nmap to emit an empty XML
                # file. Ignore the exception in this case.
                st = os.stat(command.get_xml_output_filename())
            except:
                st = None
            if st is None or st.st_size > 0:
                warn_dialog = HIGAlertDialog(
                        message_format=_("Parse error"),
                        secondary_text=_(
                            "There was an error while parsing the XML file "
                            "generated from the scan:\n\n%s""") % str(e),
                        type=gtk.MESSAGE_ERROR)
                warn_dialog.run()
                warn_dialog.destroy()
        else:
            parsed.unsaved = True

            self.scan_result.refresh_nmap_output()
            try:
                self.inventory.add_scan(parsed)
            except Exception, e:
                warn_dialog = HIGAlertDialog(
                        message_format=_("Cannot merge scan"),
                        secondary_text=_(
                            "There was an error while merging the new scan's "
                            "XML:\n\n%s") % str(e),
                        type=gtk.MESSAGE_ERROR)
                warn_dialog.run()
                warn_dialog.destroy()
        parsed.set_xml_is_temp(command.xml_is_temp)
        self.collect_umit_info(command, parsed)
        try:
            parsed.nmap_output = command.get_output()
        except MemoryError:
            self.scan_result.scan_result_notebook.nmap_output.nmap_output.show_large_output_message(command)
        self.update_ui()
        self.scans_store.finish_running_scan(command, parsed)

    def load_from_file(self, filename):
        """Load scan results from a saved file."""
        parsed = NmapParser()
        parsed.parse(filename)
        parsed.unsaved = False

        self.update_target_profile(parsed)
        self.inventory.add_scan(parsed, filename=filename)
        self.update_ui()
        i = self.scans_store.add_scan(parsed)
        log.info("scans_store.add_scan")
        self.scan_result.scan_result_notebook.nmap_output.set_active_iter(i)
        self.scan_result.change_to_ports_hosts_tab()

    def load_from_parsed_result(self, parsed_result):
        """Load scan results from a parsed NmapParser object."""
        parsed = parsed_result
        parsed.unsaved = False

        self.update_target_profile(parsed)
        self.inventory.add_scan(parsed)
        self.update_ui()
        i = self.scans_store.add_scan(parsed)
        self.scan_result.scan_result_notebook.nmap_output.set_active_iter(i)
        self.scan_result.change_to_ports_hosts_tab()

    def update_target_profile(self, parsed):
        """Update the "Target" and "Profile" entries based on the contents of a
        parsed scan."""
        command = parsed.get_nmap_command()
        targets = parsed.get_targets()
        profile_name = parsed.get_profile_name()

        self.set_command_quiet(parsed.get_nmap_command() or "")
        self.set_target_quiet(join_quoted(targets))
        self.set_profile_name_quiet(profile_name or "")

    def update_ui(self):
        """Update the interface's lists of hosts and ports from a parsed
        scan."""
        self.empty = False

        up_hosts = self.inventory.get_hosts_up()

        self.scan_result.scan_host_view.mass_update(up_hosts)

        self.scan_result.scan_result_notebook.topology.update_radialnet()

        self.hosts = {}
        self.services = {}
        for host in up_hosts:
            hostname = host.get_hostname()

            for service in host.services:
                name = service["service_name"]
                state = service["port_state"]

                if name not in self.services.keys():
                    self.services[name] = []

                hs = {"host": host, "hostname": hostname}
                hs.update(service)

                self.services[name].append(hs)

            self.hosts[hostname] = host

        # If the host and service selection is empty or has become empty,
        # select the first host if there is at least one.
        if (len(self.service_view_selection.get_selected_rows()[1]) == 0 and
                len(self.host_view_selection.get_selected_rows()[1]) == 0 and
                len(self.scan_result.scan_host_view.host_list) > 0):
            self.host_view_selection.select_iter(
                self.scan_result.scan_host_view.host_list.get_iter_first())

        self.filter_bar.set_information_text(_("%d/%d hosts shown") %
            (len(self.inventory.get_hosts_up()),
             len(NetworkInventory.get_hosts_up(self.inventory))))

        mode = self.scan_result.scan_host_view.mode
        if mode == ScanHostsView.HOST_MODE:
            self.refresh_port_output()
        elif mode == ScanHostsView.SERVICE_MODE:
            self.refresh_host_output()

    def refresh_port_output(self):
        """Refresh the "Ports" output of the "Ports / Hosts" tab to reflect the
        current host selection."""
        self.scan_result.scan_result_notebook.port_mode()

        model_host_list, selection = \
                self.host_view_selection.get_selected_rows()
        host_objs = []
        for i in selection:
            hostname = model_host_list[i[0]][2]
            if hostname in self.hosts:
                host_objs.append(self.hosts[hostname])

        if len(host_objs) == 1:
            self.set_single_host_port(host_objs[0])
        else:
            self.set_multiple_host_port(host_objs)
        self.switch_host_details(self.build_host_details(host_objs))

    def refresh_host_output(self):
        """Refresh the "Hosts" output of the "Ports / Hosts" tab to reflect the
        current service selection."""
        self.scan_result.scan_result_notebook.host_mode()

        model_service_list, selection = \
                self.service_view_selection.get_selected_rows()
        serv_objs = []
        for i in selection:
            key = model_service_list[i[0]][0]
            if key in self.services:
                serv_objs.append(self.services[key])

        # Each element of serv_objs is a list of port dicts.
        if len(serv_objs) == 1:
            self.set_single_service_host(serv_objs[0])
        else:
            servs = []
            for s in serv_objs:
                servs.append({
                    "service_name": s[0]["service_name"],
                    "ports": s})
            self.set_multiple_service_host(servs)

    def host_selection_changed(self, widget):
        self.refresh_port_output()
        # Switch nmap output to show first host occurrence
        model, selection = self.host_view_selection.get_selected_rows()
        for path in selection:
            self.go_to_host(model[path][2])
            break

    def service_selection_changed(self, widget):
        self.refresh_host_output()
        # Change scan tab to "Ports/Hosts"
        self.scan_result.change_to_ports_hosts_tab()

    def service_host_selection_changed(self, selection):
        """This is the callback called when the view is in "Services" mode and
        the user changes the selection among the many hosts displayed for a
        given service."""
        model, selection = selection.get_selected_rows()
        host_objs = []
        for path in selection:
            host_objs.append(model.get_value(model.get_iter(path), 2))
        self.switch_host_details(self.build_host_details(host_objs))

    def switch_host_details(self, pages):
        """Switch the "Host Details" view to show the ScanHostDetailsPages in
        the given list."""
        vbox = self.scan_result.scan_result_notebook.host_details_vbox

        # Remove the old children.
        for child in vbox.get_children():
            vbox.remove(child)

        for p in pages:
            p.set_expanded(False)
            vbox._pack_noexpand_nofill(p)
        if len(pages) == 1:
            pages[0].set_expanded(True)
        vbox.show_all()

    def _save_comment(self, widget, extra, host):
        """Sets the comment on a host from the contents of the comment text
        entry."""
        buff = widget.get_buffer()
        host.comment = buff.get_text(
                buff.get_start_iter(), buff.get_end_iter())
        for scan in self.inventory.get_scans():
            if host in scan.get_hosts():
                scan.unsaved = True
                break

    def build_host_details(self, hosts):
        """Builds and returns a list of "Host Details" pages corresponding to
        the given hosts."""
        pages = []
        for host in hosts:
            page = ScanHostDetailsPage(host)
            page.host_details.comment_txt_vw.connect(
                    "insert-at-cursor", self._save_comment, host)
            page.host_details.comment_txt_vw.connect(
                    "focus-out-event", self._save_comment, host)
            pages.append(page)
        return pages

    def set_single_host_port(self, host):
        """Change the "Ports / Hosts" tab to show the port output from the
        single given host."""
        host_page = self.scan_result.scan_result_notebook.open_ports.host
        host_page.switch_port_to_list_store()

        host_page.freeze()
        host_page.clear_port_list()
        for p in host.ports:
            host_page.add_to_port_list(p)
        host_page.thaw()

    def set_single_service_host(self, service):
        """Change the "Ports / Hosts" tab to show the hosts associated with the
        single named service."""
        host_page = self.scan_result.scan_result_notebook.open_ports.host
        host_page.switch_host_to_list_store()

        host_page.freeze()
        host_page.clear_host_list()
        for p in service:
            host_page.add_to_host_list(p["host"], p)
        host_page.thaw()

    def set_multiple_host_port(self, host_list):
        """Change the "Ports / Hosts" tab to show the port output for all of
        the hosts in host_list. When multiple hosts are selected, the port
        output for each is contained in an expander."""
        host_page = self.scan_result.scan_result_notebook.open_ports.host
        host_page.switch_port_to_tree_store()

        host_page.freeze()
        host_page.clear_port_tree()
        for host in host_list:
            host_page.add_to_port_tree(host)
        host_page.thaw()

    def set_multiple_service_host(self, service_list):
        """Change the "Ports / Hosts" tab to show the hosts associated with
        each of the services in service_list. Each element of service_list must
        be a dict with the keys "service_name" and "ports". When multiple
        services are selected, the hosts for each are contained in an
        expander."""
        host_page = self.scan_result.scan_result_notebook.open_ports.host
        host_page.switch_host_to_tree_store()

        host_page.freeze()
        host_page.clear_host_tree()
        for service in service_list:
            host_page.add_to_host_tree(
                    service["service_name"], service["ports"])
        host_page.thaw()


class ScanResult(gtk.HPaned):
    """This is the pane that has the "Host"/"Service" column (ScanHostsView) on
    the left and the "Nmap Output"/"Ports / Hosts"/etc. (ScanResultNotebook) on
    the right. It's the part of the interface below the toolbar."""
    def __init__(self, inventory, scans_store, scan_interface=None):
        gtk.HPaned.__init__(self)

        self.scan_host_view = ScanHostsView(scan_interface)
        self.scan_result_notebook = ScanResultNotebook(inventory, scans_store)
        self.filter_toggle_button = gtk.ToggleButton(_("Filter Hosts"))

        vbox = gtk.VBox()
        vbox.pack_start(self.scan_host_view, True, True)
        vbox.pack_start(self.filter_toggle_button, False)
        self.pack1(vbox)
        self.pack2(self.scan_result_notebook, True, False)

    def set_nmap_output(self, msg):
        self.scan_result_notebook.nmap_output.nmap_output.text_view.get_buffer().set_text(msg)

    def clear_nmap_output(self):
        self.scan_result_notebook.nmap_output.nmap_output.text_view.get_buffer().set_text("")

    def get_host_selection(self):
        return self.scan_host_view.host_view.get_selection()

    def get_service_selection(self):
        return self.scan_host_view.service_view.get_selection()

    def get_nmap_output(self):
        return self.scan_result_notebook.nmap_output.get_nmap_output()

    def clear_port_list(self):
        self.scan_result_notebook.open_ports.host.clear_port_list()

    def change_to_ports_hosts_tab(self):
        self.scan_result_notebook.set_current_page(1)

    def change_to_nmap_output_tab(self):
        self.scan_result_notebook.set_current_page(0)

    def refresh_nmap_output(self):
        """Refresh the Nmap output with the newest output of command_execution,
        if it is not None."""
        self.scan_result_notebook.nmap_output.nmap_output.refresh_output()


class ScanResultNotebook(HIGNotebook):
    """This is the right side of a ScanResult, the notebook with the tabs such
    as "Nmap Output"."""
    def __init__(self, inventory, scans_store):
        HIGNotebook.__init__(self)
        self.set_border_width(5)

        self.__create_widgets(inventory, scans_store)

        self.scans_list.scans_list.connect(
                "row-activated", self._scan_row_activated)

        self.append_page(self.nmap_output_page, gtk.Label(_('Nmap Output')))
        self.append_page(self.open_ports_page, gtk.Label(_('Ports / Hosts')))
        self.append_page(self.topology_page, gtk.Label(_('Topology')))
        self.append_page(self.host_details_page, gtk.Label(_('Host Details')))
        self.append_page(self.scans_list_page, gtk.Label(_('Scans')))

    def host_mode(self):
        self.open_ports.host.host_mode()

    def port_mode(self):
        self.open_ports.host.port_mode()

    def __create_widgets(self, inventory, scans_store):
        self.open_ports_page = HIGVBox()
        self.nmap_output_page = HIGVBox()
        self.topology_page = HIGVBox()
        self.host_details_page = HIGScrolledWindow()
        self.host_details_vbox = HIGVBox()
        self.scans_list_page = HIGVBox()

        self.open_ports = ScanOpenPortsPage()
        self.nmap_output = ScanNmapOutputPage(scans_store)
        self.topology = TopologyPage(inventory)
        self.scans_list = ScanScanListPage(scans_store)

        self.no_selected = gtk.Label(_('No host selected.'))
        self.host_details = self.no_selected

        self.open_ports_page.add(self.open_ports)
        self.nmap_output_page.add(self.nmap_output)
        self.topology_page.add(self.topology)
        self.scans_list_page.add(self.scans_list)

        self.host_details_page.add_with_viewport(self.host_details_vbox)
        self.host_details_vbox._pack_expand_fill(self.host_details)

    def _scan_row_activated(self, treeview, path, view_column):
        """Switch back to the Nmap Output view when a scan is activated
        (double-clicked) on the scans list."""
        self.nmap_output.set_active_iter(treeview.get_model().get_iter(path))
        self.set_current_page(0)