# vim: set fileencoding=utf-8 :

# ***********************IMPORTANT NMAP LICENSE TERMS************************
# *                                                                         *
# * The Nmap Security Scanner is (C) 1996-2013 Insecure.Com LLC. Nmap is    *
# * also a registered trademark of Insecure.Com LLC.  This program is free  *
# * software; you may redistribute and/or modify it under the terms of the  *
# * GNU General Public License as published by the Free Software            *
# * Foundation; Version 2 ("GPL"), BUT ONLY WITH ALL OF THE CLARIFICATIONS  *
# * AND EXCEPTIONS DESCRIBED HEREIN.  This guarantees your right to use,    *
# * modify, and redistribute this software under certain conditions.  If    *
# * you wish to embed Nmap technology into proprietary software, we sell    *
# * alternative licenses (contact sales@nmap.com).  Dozens of software      *
# * vendors already license Nmap technology such as host discovery, port    *
# * scanning, OS detection, version detection, and the Nmap Scripting       *
# * Engine.                                                                 *
# *                                                                         *
# * Note that the GPL places important restrictions on "derivative works",  *
# * yet it does not provide a detailed definition of that term.  To avoid   *
# * misunderstandings, we interpret that term as broadly as copyright law   *
# * allows.  For example, we consider an application to constitute a        *
# * derivative work for the purpose of this license if it does any of the   *
# * following with any software or content covered by this license          *
# * ("Covered Software"):                                                   *
# *                                                                         *
# * o Integrates source code from Covered Software.                         *
# *                                                                         *
# * o Reads or includes copyrighted data files, such as Nmap's nmap-os-db   *
# * or nmap-service-probes.                                                 *
# *                                                                         *
# * o Is designed specifically to execute Covered Software and parse the    *
# * results (as opposed to typical shell or execution-menu apps, which will *
# * execute anything you tell them to).                                     *
# *                                                                         *
# * o Includes Covered Software in a proprietary executable installer.  The *
# * installers produced by InstallShield are an example of this.  Including *
# * Nmap with other software in compressed or archival form does not        *
# * trigger this provision, provided appropriate open source decompression  *
# * or de-archiving software is widely available for no charge.  For the    *
# * purposes of this license, an installer is considered to include Covered *
# * Software even if it actually retrieves a copy of Covered Software from  *
# * another source during runtime (such as by downloading it from the       *
# * Internet).                                                              *
# *                                                                         *
# * o Links (statically or dynamically) to a library which does any of the  *
# * above.                                                                  *
# *                                                                         *
# * o Executes a helper program, module, or script to do any of the above.  *
# *                                                                         *
# * This list is not exclusive, but is meant to clarify our interpretation  *
# * of derived works with some common examples.  Other people may interpret *
# * the plain GPL differently, so we consider this a special exception to   *
# * the GPL that we apply to Covered Software.  Works which meet any of     *
# * these conditions must conform to all of the terms of this license,      *
# * particularly including the GPL Section 3 requirements of providing      *
# * source code and allowing free redistribution of the work as a whole.    *
# *                                                                         *
# * As another special exception to the GPL terms, Insecure.Com LLC grants  *
# * permission to link the code of this program with any version of the     *
# * OpenSSL library which is distributed under a license identical to that  *
# * listed in the included docs/licenses/OpenSSL.txt file, and distribute   *
# * linked combinations including the two.                                  *
# *                                                                         *
# * Any redistribution of Covered Software, including any derived works,    *
# * must obey and carry forward all of the terms of this license, including *
# * obeying all GPL rules and restrictions.  For example, source code of    *
# * the whole work must be provided and free redistribution must be         *
# * allowed.  All GPL references to "this License", are to be treated as    *
# * including the terms and conditions of this license text as well.       *
# *                                                                         *
# * Because this license imposes special exceptions to the GPL, Covered     *
# * Work may not be combined (even as part of a larger work) with plain GPL *
# * software.  The terms, conditions, and exceptions of this license must   *
# * be included as well.  This license is incompatible with some other open *
# * source licenses as well.  In some cases we can relicense portions of    *
# * Nmap or grant special permissions to use it in other open source        *
# * software.  Please contact fyodor@nmap.org with any such requests.       *
# * Similarly, we don't incorporate incompatible open source software into  *
# * Covered Software without special permission from the copyright holders. *
# *                                                                         *
# * If you have any questions about the licensing restrictions on using     *
# * Nmap in other works, are happy to help.  As mentioned above, we also    *
# * offer alternative license to integrate Nmap into proprietary            *
# * applications and appliances.  These contracts have been sold to dozens  *
# * of software vendors, and generally include a perpetual license as well  *
# * as providing for priority support and updates.  They also fund the      *
# * continued development of Nmap.  Please email sales@nmap.com for further *
# * information.                                                            *
# *                                                                         *
# * If you have received a written license agreement or contract for        *
# * Covered Software stating terms other than these, you may choose to use  *
# * and redistribute Covered Software under those terms instead of these.   *
# *                                                                         *
# * Source is provided to this software because we believe users have a     *
# * right to know exactly what a program is going to do before they run it. *
# * This also allows you to audit the software for security holes (none     *
# * have been found so far).                                                *
# *                                                                         *
# * Source code also allows you to port Nmap to new platforms, fix bugs,    *
# * and add new features.  You are highly encouraged to send your changes   *
# * to the dev@nmap.org mailing list for possible incorporation into the    *
# * main distribution.  By sending these changes to Fyodor or one of the    *
# * Insecure.Org development mailing lists, or checking them into the Nmap  *
# * source code repository, it is understood (unless you specify otherwise) *
# * that you are offering the Nmap Project (Insecure.Com LLC) the           *
# * unlimited, non-exclusive right to reuse, modify, and relicense the      *
# * code.  Nmap will always be available Open Source, but this is important *
# * because the inability to relicense code has caused devastating problems *
# * for other Free Software projects (such as KDE and NASM).  We also       *
# * occasionally relicense the code to third parties as discussed above.    *
# * If you wish to specify special license conditions of your               *
# * contributions, just say so when you send them.                          *
# *                                                                         *
# * This program is distributed in the hope that it will be useful, but     *
# * WITHOUT ANY WARRANTY; without even the implied warranty of              *
# * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the Nmap      *
# * license file for more details (it's in a COPYING file included with     *
# * Nmap, and also available from https://svn.nmap.org/nmap/COPYING         *
# *                                                                         *
# ***************************************************************************/

from radialnet.core.Graph import *
from radialnet.gui.RadialNet import NetNode
import zenmapCore.NmapParser

import math
import re


COLORS = [(0.0, 1.0, 0.0),
          (1.0, 1.0, 0.0),
          (1.0, 0.0, 0.0)]

BASE_RADIUS = 5.5
NONE_RADIUS = 4.5



def set_node_info(node, host):
    """
    """
    node.set_host(host)

    radius = BASE_RADIUS + 2 * math.log(node.get_info("number_of_open_ports") + 1)

    node.set_draw_info({"color":COLORS[node.get_info("vulnerability_score")],
                        "radius":radius})

class TracerouteHostInfo(object):
    """This is a minimal implementation of HostInfo, sufficient to
    represent the information in an intermediate traceroute hop."""
    def __init__(self):
        self.ip = None
        self.ipv6 = None
        self.mac = None
        self.hostname = None
        self.ports = []
        self.extraports = []
        self.osmatches = []

    def get_hostname(self):
        return self.hostname

    def get_best_osmatch(self):
        if not self.osmatches:
            return None
        def osmatch_key(osmatch):
            try:
                return -float(osmatch["accuracy"])
            except ValueError:
                return 0
        return sorted(self.osmatches, key = osmatch_key)[0]

    hostnames = property(lambda self: self.hostname and [self.hostname] or [])

def make_graph_from_hosts(hosts):
    #hosts = parser.get_root().search_children('host', deep=True)
    graph = Graph()
    nodes = list()
    node_cache = {}

    # Setting initial reference host
    main_node = NetNode()
    nodes.append(main_node)

    localhost = TracerouteHostInfo()
    localhost.ip = {"addr": "127.0.0.1/8", "type": "ipv4"}
    localhost.hostname = "localhost"
    main_node.set_host(localhost)
    main_node.set_draw_info({"valid": True, "color":(0,0,0), "radius":NONE_RADIUS})

    #Save endpoints for attaching scanned hosts to
    endpoints = {}
    # For each host in hosts just mount the graph
    for host in hosts:
        trace = host.trace
        endpoints[host] = nodes[0]
        hops = trace.get("hops")

        # If host has traceroute information mount graph
        if hops is not None and len(hops) > 0:
            prev_node = nodes[0]
            hops = trace.get("hops", [])
            ttls = [int(hop["ttl"]) for hop in hops]

            # Getting nodes of host by ttl
            for ttl in range(1, max(ttls) + 1):
                if ttl in ttls:
                    # Find a hop by ttl
                    hop = None
                    for h in hops:
                        if ttl == int(h["ttl"]):
                            hop = h
                            break

                    node = node_cache.get(hop["ipaddr"])
                    if node is None:
                        node = NetNode()
                        nodes.append(node)

                        hop_host = TracerouteHostInfo()
                        hop_host.ip = {"addr": hop["ipaddr"], "type": "", "vendor": ""}
                        node.set_draw_info({"valid":True})
                        node.set_draw_info({"color":(1,1,1),
                                            "radius":NONE_RADIUS})

                        if hop["host"] != "":
                            hop_host.hostname = hop["host"]

                        node.set_host(hop_host)

                        node_cache[node.get_info("ip")] = node

                    rtt = hop["rtt"]
                    if rtt != "--":
                        graph.set_connection(node, prev_node, float(rtt))
                    else:
                        graph.set_connection(node, prev_node)
                else:
                    node = NetNode()
                    nodes.append(node)

                    node.set_draw_info({"valid":False})
                    node.set_draw_info({"color":(1,1,1), "radius":NONE_RADIUS})

                    graph.set_connection(node, prev_node)

                prev_node = node
                endpoints[host] = node

    # For each fully scanned host
    for host in hosts:
        ip = host.ip
        if ip is None:
            ip = host.ipv6

        node = node_cache.get(ip["addr"])
        if node is None:
            node = NetNode()
            nodes.append(node)

            node.set_draw_info({"no_route":True})

            graph.set_connection(node, endpoints[host])

        node.set_draw_info({"valid":True})
        node.set_draw_info({"scanned":True})
        set_node_info(node, host)
        node_cache[node.get_info("ip")] = node

    graph.set_nodes(nodes)
    graph.set_main_node(main_node)

    return graph