--- -- Interface with Nmap internals. -- -- The nmap module is an interface with Nmap's internal functions -- and data structures. The API provides target host details such as port -- states and version detection results. It also offers an interface to the -- Nsock library for efficient network I/O. -- @copyright Same as Nmap--See http://nmap.org/book/man-legal.html module "nmap" --- Returns the debugging level as a non-negative integer. -- -- The debugging level can be set with the -d option. -- @return The debugging level. -- @usage if nmap.debugging() > 0 then ... end function debugging() --- Determines whether Nmap was compiled with SSL support. -- -- This can be used to avoid sending SSL probes when SSL is not available. -- @return True if Nmap was compiled with SSL support, false otherwise. function have_ssl() --- Returns the verbosity level as a non-negative integer. -- -- The verbosity level can be set with the -v option. When -- a script is given by name with the --script option, as -- opposed to being selected by default or by category, its verbosity -- level is automatically increased by one. -- @return The verbosity level. -- @usage if nmap.verbosity() > 0 then ... end function verbosity() --- Returns whether a script should be able to perform privileged operations -- -- @return True if Nmap is running privileged, false otherwise. function is_privileged() --- Resolves the specified host name using the optional address family and -- returns a table containing all of the matching addresses. -- -- If no address family is given, resolve() will return all addresses for the -- name. -- -- @param host Host name to resolve -- @param family Address family string (such as "inet") to specify the type -- of addresses returned -- @see address_family -- @return Status (true or false) -- @return Table containing addresses resolved from the host name if status -- is true, or an error string if status is false -- @usage local status, t = nmap.resolve("www.kame.net", nmap.address_family()) function resolve(host, family) --- Returns the address family Nmap is using. -- -- For example, if Nmap is run with the -6 option, then "inet6" is returned. -- -- @return The address family as a string ("inet" or "inet6") -- @usage local family = nmap.address_family() function address_family() --- Returns the interface name (dnet-style) that Nmap is using. -- -- For example in the pre-scanning ("prerule" scripts) phase -- if Nmap is run with the -e eth0, then "eth0" can be -- returned, however Nmap can return an other interface name since it -- can determine the best interface suited for the job. -- Other "hostrule" and "portrule" scripts -- should use the interface field of the host table: -- host.interface. -- -- The result of this function can be used to get the interface information -- table, example: nmap.get_interface_info("eth0"). -- -- @return A string containing the interface name (dnet-style) on -- success, or a nil value on failures. -- @usage local interface_name = nmap.get_interface() function get_interface() --- Gets the interface network information. -- -- This function takes a dnet-style interface name and returns a table -- containing the network information of the interface. -- -- Keys of the returned table: -- * device The interface name, can be an interface alias. -- * shortname A simple short name of the device. -- * netmask The netmask bits (CIDR) of the interface. -- * address The string representing the IP address assigned to the interface. -- * link The string representing the hardware type of the interface. Possible values are: "ethernet", "loopback", "p2p" or "other". -- * mac MAC address (six-byte-long binary string) of the interface if the type of the interface is "ethernet", otherwise it is nil. -- * broadcast The string representing the broadcast address assigned to the interface if the interface type is "ethernet" and if the used address is IPv4, otherwise it is nil. -- * up The state of the interface, possible values are "up" or "down". -- * mtu The MTU size of the interface. -- -- @param interface_name The name of the interface. -- @return Table containing the network information of the interface on -- success, or nil and an error message on failures. -- @usage local iface, err = nmap.get_interface_info("eth0") function get_interface_info(interface_name) --- Lists network interfaces -- -- This script enumerates all network interfaces and returns a list of tables -- containing information about every interface. -- -- Keys of each table: -- * device The interface name, can be an interface alias. -- * shortname A simple short name of the device. -- * netmask The netmask bits (CIDR) of the interface. -- * address The string representing the IP address assigned to the interface. -- * link The string representing the hardware type of the interface. Possible values are: "ethernet", "loopback", "p2p" or "other". -- * mac MAC address (six-byte-long binary string) of the interface if the type of the interface is "ethernet", otherwise it is nil. -- * broadcast The string representing the broadcast address assigned to the interface if the interface type is "ethernet" and if the used address is IPv4, otherwise it is nil. -- * up The state of the interface, possible values are "up" or "down". -- * mtu The MTU size of the interface. -- -- @return Array of tables containing information about every discovered interface. -- @usage local interfaces, err = nmap.list_interfaces() function list_interfaces() --- Returns the TTL (time to live) value selected by the --ttl option -- -- If there is no value specified or if the value specified with the --ttl -- option is out of the range 0 to 255 (inclusive) this function returns 64, -- which is the default TTL for an IP packet. This function would be most -- useful in crafting packets, which we want to comply with the selected -- Nmap TTL value. -- -- @return A number containing the TTL value -- @usage local ttl = nmap.get_ttl() function get_ttl() --- Returns the payload data length selected with the --data-length option -- -- Used when a script is crafting ICMP packets and needs to comply with the -- selected payload data length. If there is no value specified this function -- returns 0 which is the default length of the ICMP payload for Nmap. -- -- @return A number containing the value of the payload length -- @usage local payload_length = nmap.get_payload_length function get_payload_length() --- Searches for the specified file relative to Nmap's search paths and returns -- a string containing its path if it is found and readable (to the process). -- Absolute paths and paths relative to the current directory will not be -- searched. -- -- If the file is not found, not readable, or is a directory, nil -- is returned. -- @usage -- nmap.fetchfile("nmap-rpc") --> "/usr/local/share/nmap/nmap-rpc" -- @param filename Filename to search for. -- @return String representing the full path to the file or nil. function fetchfile(filename) --- Returns the timing level as a non-negative integer. -- -- Possible return values vary from 0 to 5, -- corresponding to the six built-in Nmap timing templates. The timing level -- can be set with the -T option. -- @return The timing level. function timing_level() --- Gets a port table for a port on a given host. -- -- This function takes a host table and a port table and returns a port table -- for the queried port. The port table returned is similar in structure to the -- ones passed to the hostrule, portrule, and -- action functions. If the given port was not scanned the function -- returns nil. -- -- You can of course reuse the host and port tables passed to a script's rule -- function. The purpose of this call is to be able to match scripts against -- more than one open port. For example if the target host has an open port 22 -- and a running identd server, then you can write a script which will only fire -- if both ports are open and there is an identification server on port 113. -- While it is possible to specify IP addresses different to the currently -- scanned target, the result will only be correct if the target is in the -- currently scanned group of hosts. -- @param host Host table, containing an ip field. -- @param port Port table, containing number and -- protocol fields. -- @return A new port table holding the status and information for the port, or nil. -- @usage p = nmap.get_port_state({ip="127.0.0.1"}, {number="80", protocol="tcp"}) function get_port_state(host, port) --- Iterates over port tables matching protocol and state for a given host -- -- This function takes a host table, previous port table, port protocol and -- port state to return matching port tables on a host. -- -- The first time you call this function, pass nil for the port -- parameter to get the first matching port table. From then on, pass the -- previous port table returned by this function to the port parameter for the -- next matching port table. -- -- @param host Host table, containing an ip field -- @param port Port table, containing a number field; or nil -- for first port -- @param proto Port protocol, such as "tcp" -- @param state Port state, such as "open" -- @return Next port table for host, or nil when exhausted -- @usage port = nmap.get_ports(host, port, "tcp", "open") function get_ports(host, port, proto, state) --- Sets the state of a port on a given host. -- -- Using this function, the final port state, reflected in Nmap's results, can -- be changed for a target. This is useful when Nmap detects a port as -- open|filtered, but the script successfully connects to that -- port. In this case, the script can set the port state to open. -- This function doesn't change the original port table passed a script's -- action function. -- @param host Host table, containing an ip field. -- @param port Port table, containing number and -- protocol fields. -- @param state Port state, like "open" or "closed". function set_port_state(host, port, state) --- Sets version information on a port. -- -- NSE scripts are sometimes able to determine the service name and application -- version listening on a port. A whole script category (version) -- was designed for this purpose. This function is used to record version -- information when it is discovered. -- -- The host and port arguments to this function should either be the tables -- passed to the action method or they should have the same structure. The port -- argument specifies the port to operate on through its number -- and protocol fields. and also contains the new version -- information to set. The version detection fields this function looks at are -- name, product, version, -- extrainfo, hostname, ostype, -- devicetype, service_tunnel, and cpe. -- All these keys are optional. -- -- The probestate argument describes the state in which the script -- completed. It is a string, one of: "hardmatched", -- "softmatched", "nomatch", -- "tcpwrapped", or "incomplete". -- "hardmatched" is almost always used (and is the default), -- as it signifies a -- successful match. The other possible states are generally only used for -- standard version detection rather than the NSE enhancement. -- @param host Host table, containing an ip field. -- @param port Port table, containing number and -- protocol fields, as well as any additional version information -- fields. -- @param probestate The state of the probe: "hardmatched", -- "softmatched", "nomatch", -- "tcpwrapped", or "incomplete". function set_port_version(host, port, probestate) --- Returns the current date and time in seconds. -- @return The number of seconds since the epoch (on most systems this is -- 01/01/1970) as a floating point value. -- @usage local now = nmap.clock() function clock() --- Returns the current date and time in milliseconds. -- @return The number of milliseconds since the epoch (on most systems this is -- 01/01/1970). -- @usage local now = nmap.clock_ms() function clock_ms() --- Create a mutex on an object. -- -- This function returns another function that works as a mutex on the object -- passed. This object can be any Lua data type except nil, -- Booleans, and Numbers. The Mutex (the returned function) allows you to lock, -- try to lock, and release the mutex. The Mutex function takes only one -- argument, which must be one of -- * "lock": makes a blocking lock on the mutex. If the mutex is busy then the thread will yield and wait. The function returns with the mutex locked. -- * "trylock": makes a non-blocking lock on the mutex. If the mutex is busy then it immediately returns a false value. Otherwise, the mutex locks the mutex and returns true. -- * "done": releases the mutex and allows another thread to lock it. If the thread does not have a lock on the mutex, an error will be raised. -- * "running": returns the thread locked on the mutex or nil if no thread is locked. This should only be used for debugging as it interferes with finished threads from being collected. -- -- NSE maintains a weak reference to the Mutex function so other calls to -- nmap.mutex with the same object will return the same function (Mutex); -- however, if you discard your reference to the Mutex then it may be collected -- and subsequent calls to nmap.mutex with the object will return a different -- Mutex! -- @param object Object to create a mutex for. -- @return Mutex function which takes one of the following arguments: -- "lock", "trylock", "done", or -- "running". -- @usage -- id = "My Script's Unique ID" -- -- local mutex = nmap.mutex(id) -- function action(host, port) -- mutex "lock" -- -- do stuff -- mutex "done" -- return script_output -- end function mutex(object) --- Create a condition variable for an object. -- -- This function returns a function that works as a Condition Variable for the -- given object parameter. The object can be any Lua data type except -- nil, Booleans, and Numbers. The Condition Variable (returned -- function) allows you wait, signal, and broadcast on the condition variable. -- The Condition Variable function takes only one argument, which must be one of -- * "wait": Wait on the condition variable until another thread wakes us. -- * "signal": Wake up a single thread from the waiting set of threads for this condition variable. -- * "broadcast": Wake up all threads in the waiting set of threads for this condition variable. -- -- NSE maintains a weak reference to the Condition Variable so other calls to -- nmap.condvar with the same object will return the same function (Condition -- Variable); however, if you discard your reference to the Condition -- Variable then it may be collected; and, subsequent calls to nmap.condvar with -- the object will return a different Condition Variable function! -- -- In NSE, Condition Variables are typically used to coordinate with threads -- created using the stdnse.new_thread facility. The worker threads must -- wait until work is available that the master thread (the actual running -- script) will provide. Once work is created, the master thread will awaken -- one or more workers so that the work can be done. -- -- It is important to check the predicate (the test to see if your worker -- thread should "wait" or not) BEFORE and AFTER the call to wait. You are -- not guaranteed spurious wakeups will not occur (that is, there is no -- guarantee your thread will not be awakened when no thread called -- "signal" or "broadcast" on the condition variable). -- One important check for your worker threads, before and after waiting, -- should be to check that the master script thread is still alive. -- (To check that the master script thread is alive, obtain the "base" thread -- using stdnse.base and use coroutine.status). You do not want your worker -- threads to continue when the script has ended for reasons unknown to your -- worker thread. You are guaranteed that all threads waiting on a -- condition variable will be awakened if any thread that has accessed -- the condition variable via nmap.condvar ends for any -- reason. This is essential to prevent deadlock with threads -- waiting for another thread to awaken -- them that has ended unexpectedly. -- @see stdnse.new_thread -- @see stdnse.base -- @param object Object to create a condition variable for. -- @return ConditionVariable Condition variable function. -- @usage -- local myobject = {} -- local cv = nmap.condvar(myobject) -- cv "wait" -- waits until another thread calls cv "signal" function condvar(object) --- Creates a new exception handler. -- -- This function returns an exception handler function. The exception handler is -- meant to be wrapped around other function calls that may raise an exception. -- A function raises an exception by making its first return value false and its -- second return value a message describing the error. When an exception occurs, -- the exception handler optionally calls a user-provided cleanup function, then -- terminates the script. When an exception does not occur (the wrapped -- function's first return value is true), the exception handler strips off the -- first return value and returns the rest. -- -- The optional cleanup function is passed as the sole argument to -- new_try. It can be used to release sockets or other resources -- before the script terminates. -- -- A function that may raise an exception must follow the return protocol -- understood by this function: on an exception its return values are -- false or nil followed by an error message; on -- success its return values are any true value followed by any other results. -- @param handler User cleanup function (optional). -- @usage -- local result, socket, try, catch -- -- result = "" -- socket = nmap.new_socket() -- catch = function() -- socket:close() -- end -- try = nmap.new_try(catch) -- try(socket:connect(host, port)) -- result = try(socket:receive_lines(1)) -- try(socket:send(result)) function new_try(handler) --- Returns a new NSE socket object. -- -- To allow for efficient and parallelizable network I/O, NSE provides an -- interface to Nsock, the Nmap socket library. The smart callback mechanism -- Nsock uses is fully transparent to NSE scripts. The main benefit of NSE's -- sockets is that they never block on I/O operations, allowing many scripts to -- be run in parallel. The I/O parallelism is fully transparent to authors of -- NSE scripts. In NSE you can either program as if you were using a single -- non-blocking socket or you can program as if your connection is blocking. -- Seemingly blocking I/O calls still return once a specified timeout has been -- exceeded. -- -- NSE sockets are the recommended way to do network I/O. They support -- connect-style sending and receiving over TCP and UDP (and SSL), -- as well as raw socket receiving. -- @param protocol a protocol string (optional, defaults to "tcp"). -- @param af an address family string (optional, defaults to "inet"). -- @return A new NSE socket. -- @see pcap_open -- @usage local socket = nmap.new_socket() function new_socket(protocol, af) --- Sets the local address of a socket. -- -- This socket method sets the local address and port of a socket. It must be -- called before connect. The address set by bind -- overrides Nmap's source address and port set by the -S and -- -g options. -- @param addr Address string or nil (optional). -- @param port Port number or nil (optional). -- @return Status (true or false). -- @return Error string (if status is false). -- @usage -- try = nmap.new_try() -- try(socket:bind(nil, 53)) -- try(socket:bind("1.2.3.4")) -- try(socket:bind("2001:db8::1")) -- try(socket:bind("1.2.3.4", 53)) function bind(addr, port) --- Establishes a connection. -- -- This method puts a socket in a state ready for communication. It takes as -- arguments a host descriptor (a host table, IP address, or hostname), a port -- descriptor (a port table or number), and optionally a protocol. If given, the -- protocol must be one of "tcp", "udp" or -- "ssl". The default value for the protocol is -- port.protocol if port is a port table, otherwise -- "tcp". -- -- If host is a host table, it must contain at least one of the -- keys ip or name. If name -- is given, it is used to request the correct certificate in SSL connections. -- Passing a string instead of a host table acts like host.ip and -- host.name were set to the same value. If port -- is a table, it must contain the number key. -- -- On success the function returns a true value. On failure it returns a false -- value (false or nil) and an error string. Those -- strings are taken from the gai_strerror C function. They are -- (with the error code in parentheses): -- * "Address family for hostname not supported" (EAI_ADDRFAMILY) -- * "Temporary failure in name resolution" (EAI_AGAIN) -- * "Bad value for ai_flags" (EAI_BADFLAGS) -- * "Non-recoverable failure in name resolution" (EAI_FAIL) -- * "ai_family not supported" (EAI_FAMILY) -- * "Memory allocation failure" (EAI_MEMORY) -- * "No address associated with hostname" (EAI_NODATA) -- * "Name or service not known" (EAI_NONAME) -- * "Servname not supported for ai_socktype" (EAI_SERVICE) -- * "ai_socktype not supported" (EAI_SOCKTYPE) -- * "System error" (EAI_SYSTEM) -- In addition to these standard system error messages there are two -- NSE-specific errors: -- * "Sorry, you don't have OpenSSL": The protocol is "ssl" but Nmap was compiled without OpenSSL support. -- * "invalid connection method": The second parameter is not one of "tcp", "udp", and "ssl". -- @param host Host table, hostname or IP address. -- @param port Port table or number. -- @param protocol "tcp", "udp", or -- "ssl" (default "tcp", or whatever was set in -- new_socket). -- @return Status (true or false). -- @return Error code (if status is false). -- @see new_socket -- @usage -- local status, err = socket:connect(host, port) -- if not status then -- return string.format("Can't connect: %s", err) -- end function connect(host, port, protocol) --- Reconnect the open (connected) socket with SSL. -- -- It is sometimes desirable to request SSL over an established connection. -- The internal buffers for the socket are cleared when the reconnection is -- made. Any received data that has not yet been read through a call to receive -- is lost. -- @usage -- local status, err = socket:reconnect_ssl() -- if not status then -- return string.format("Can't reconnect with ssl: %s", err) -- end function reconnect_ssl() --- Sends data on an open socket. -- -- This socket method sends the data contained in the data string through an -- open connection. On success the function returns a true value. If the send -- operation fails, the function returns a false value (false or -- nil) along with an error string. The error strings are -- * "Trying to send through a closed socket": There was no call to socket:connect before the send operation. -- * "TIMEOUT": The operation took longer than the specified timeout for the socket. -- * "ERROR": An error occurred inside the underlying Nsock library. -- * "CANCELLED": The operation was cancelled. -- * "KILL": For example the script scan is aborted due to a faulty script. -- * "EOF": An EOF was read (probably will not occur for a send operation). -- @param data The data to send. -- @return Status (true or false). -- @return Error code (if status is false). -- @see new_socket -- @usage local status, err = socket:send(data) function send(data) --- Sends data on an unconnected socket to a given destination. -- -- Sockets that have not been connected do not have an implicit -- destination address, so the send function doesn't work. Instead -- the destination must be given with each send using this function. The -- protocol and address family of the socket must have been set in -- new_socket. On -- success the function returns a true value. If the send operation fails, the -- function returns a false value (false or nil) along -- with an error string. The error strings are -- * "TIMEOUT": The operation took longer than the specified timeout for the socket. -- * "ERROR": An error occurred inside the underlying Nsock library. -- * "CANCELLED": The operation was cancelled. -- * "KILL": For example the script scan is aborted due to a faulty script. -- * "EOF": An EOF was read (probably will not occur for a send operation). -- @param host The hostname or IP address to send to. -- @param port The port number to send to. -- @param data The data to send. -- @return Status (true or false). -- @return Error code (if status is false). -- @usage local status, err = socket:sendto(host, port, data) function sendto(host, port, data) --- Receives data from an open socket. -- -- The receive method does a non-blocking receive operation on an open socket. -- On success the function returns true along with the received data. On -- failure the function returns a false value (false or -- nil) along with an error string. A failure occurs for example if -- receive is called on a closed socket. The receive call returns -- to the NSE script all the data currently stored in the receive buffer of the -- socket. Error conditions are the same as for send. -- @return Status (true or false). -- @return Data (if status is true) or error string (if status is false). -- @see new_socket -- @usage local status, data = socket:receive() function receive() --- Receives lines from an open connection. -- -- Tries to receive at least n lines from an open connection. A -- line is a string delimited with \n characters. If no data was -- was received before the operation times out a "TIMEOUT" error -- occurs. If even one character was received then it is returned with success. -- On the other hand, if more than n lines were received, all are -- returned, not just n. Use stdnse.make_buffer to -- guarantee only one line is returned per call. -- -- The return values and error codes are the same as for send. -- @param n Minimum number of lines to read. -- @return Status (true or false). -- @return Data (if status is true) or error string (if status is false). -- @see new_socket -- @usage local status, lines = socket:receive_lines(1) function receive_lines(n) --- Receives bytes from an open connection. -- -- Tries to receive at least n bytes from an open connection. Like -- in receive_lines, n is the minimum amount of -- characters we would like to receive. If more arrive, we get all of them. If -- even one is received then it is returned. If no characters arrive before the -- operation times out, a "TIMEOUT" error occurs. -- -- The return values and error codes are the same as for send. -- @param n Minimum number of bytes to read. -- @return Status (true or false). -- @return Data (if status is true) or error string (if status is false). -- @see new_socket -- @usage local status, bytes = socket:receive_bytes(1) function receive_bytes(n) --- Reads from a socket using a buffer and an arbitrary delimiter. -- -- This method reads data from the network until it encounters the given -- delimiter string (or matches the function passed in). This function -- continues to read from the network until the delimiter is found or the -- function times out. If data is read beyond the delimiter, that data is -- saved in a buffer for the next call to receive_buf. -- -- The first argument may be either a pattern or a function. If a pattern, that -- pattern is used to separate the data. If a function, it must take exactly -- one parameter (the buffer) and its return values must be in the same format -- as those of string.find (offsets to the start and the end of -- the delimiter inside the buffer, or nil if the delimiter is not -- found). The nselib match.lua module provides functions for -- matching against regular expressions or byte counts. These functions are -- suitable as arguments to receive_buf. -- -- The second argument to receive_buf is a Boolean value -- controlling whether the delimiting string is returned along with the -- received data (true) or discarded (false). -- -- On success the function returns true along with the received data. On failure -- the function returns false or nil along with an -- receive error string. This function may also throw errors for incorrect usage. -- @param delimiter A Lua pattern or a function with return values like those of -- string.find. -- @param keeppattern Whether to return the delimiter string with any returned -- data. -- @return Status (true or false). -- @return Data (if status is true) or error string (if status is false). -- @see new_socket -- @usage local status, line = socket:receive_buf("\r?\n", false) function receive_buf(delimiter, keeppattern) --- Closes an open connection. -- -- On success the function returns true. If the close fails, the function -- returns false or nil and an error string. Currently -- the only error message is "Trying to close a closed socket", -- which is issued if the socket has already been closed. -- -- Sockets are subject to garbage collection. Should you forget to close a -- socket, it will get closed before it gets deleted (on the next occasion Lua's -- garbage collector is run). However since garbage collection cycles are -- difficult to predict, it is considered good practice to close opened sockets. -- @return Status (true or false). -- @return Error code (if status is false). -- @see new_socket -- @usage socket:close() function close() --- Gets information about a socket. -- -- This function returns information about a socket object. It returns five -- values. If an error occurred, the first value is false or -- nil and the second value is an error string. Otherwise the first -- value is true and the remaining 4 values describe both endpoints of the TCP -- connection. If you put the call inside an exception handler created by -- new_try the status value is consumed. The call can be used for -- example if you want to query an authentication server. -- @return Status (true or false). -- @return Local IP address (if status is true) or error string (if status is -- false). -- @return Local port number (if status is true). -- @return Remote IP address (if status is true). -- @return Remote port number (if status is true). -- @see new_socket -- @usage local status, lhost, lport, rhost, rport = socket:get_info() function get_info() --- Sets a timeout for socket input and output operations. -- -- After this time, given in milliseconds, socket operations will time out and -- return. The default value is 30,000 (30 seconds). The lowest allowed value is -- 10 ms, since this is the granularity of NSE network I/O. -- @param t Timeout in milliseconds. -- @see new_socket -- @usage socket:set_timeout(10000) function set_timeout(t) --- Opens a socket for raw packet capture. -- -- @param device The dnet-style interface name of the device you want to capture -- from. -- @param snaplen The length of each packet you want to capture (similar to the -- -s option to tcpdump) -- @param promisc Boolean value for whether the interface should activate -- promiscuous mode. -- @param bpf A string describing a Berkeley Packet Filter expression (like -- those provided to tcpdump). -- @see new_socket, pcap_receive -- @usage -- local socket = nmap.new_socket() -- socket:pcap_open("eth0", 64, false, "tcp") function pcap_open(device, snaplen, promisc, bpf) --- Receives a captured packet. -- -- If an error or timeout occurs, the function returns false and an error -- message. Otherwise, the function returns true followed by the packet length, -- layer two header, layer three header and packet capture time. -- @return Status (true or false). -- @return The length of the captured packet (this may be smaller than the -- actual packet length since packets are truncated when the -- libpcap snaplen parameter is smaller than the total packet length). -- @return Data from the second OSI layer (e.g. ethernet headers). -- @return Data from the third OSI layer (e.g. IPv4 headers). -- @return Packet capture time, as floating point seconds since the epoch -- @see pcap_open -- @usage status, plen, l2_data, l3_data, time = socket:pcap_receive() function pcap_receive() --- Closes a pcap device. -- @see close, pcap_close -- @usage socket:pcap_close() function pcap_close() --- -- Retrieves the SSL certificate of the peer. The returned value can be accessed -- like a table and has the following members: -- -- -- subject = { commonName = "...", countryName = "...", -- { "2", "5", "4", "15" } = "...", ... }, -- issuer = { commonName = "...", ... }, -- pubkey = { type = "rsa", bits = 1024 }, -- validity = { notBefore = { year = 2020, month = 5, day = 5, -- hour = 0, min = 0, sec = 0 }, -- notAfter = { year = 2021, month = 5, day = 5, -- hour = 0, min = 0, sec = 0 } }, -- pem = "-----BEGIN CERTIFICATE-----\nMIIFxzCCBK+gAwIBAgIQX02QuADDB7CVj..." -- -- -- It also has the following member functions: -- -- * digest(algorithm) returns the digest of the certificate using the given digest algorithm, which is any of the strings returned by openssl.supported_digests, typicaly something like "md5" or "sha1". -- -- The "subject" and "issuer" fields hold each -- distinguished name. Fields with an unknown OID are represented as an array -- whose elements are the numeric components of the OID, encoded as strings. -- -- The "validity" table has the members "notBefore" -- and "notAfter". Each of these is a table as returned by -- os.date("!*t") if the date in the certificate could be parsed, -- except that they lack the "wday" and "yday" -- members. If the date could not be parsed, the value will be a string -- containing the raw byte values of the field. If absent, the value will be -- nil. -- -- The "pem" field contains a PEM-encoded string of the entire -- contents of the certificate. -- @return A table as described above. -- @usage -- local s = nmap.new_socket() -- local status, error = s:connect(host, port, "ssl") -- if status then -- local cert = s:get_ssl_certificate() -- local digest = cert:digest("md5") -- end function get_ssl_certificate() --- Creates a new dnet object, used to send raw packets. -- @usage local dnet = nmap.new_dnet() function new_dnet() --- Opens an ethernet interface for raw packet sending. -- -- An error ("device is not valid ethernet interface") is thrown -- in case the provided argument is not valid. -- @param interface_name The dnet-style name of the interface to open. -- @see new_dnet -- @usage dnet:ethernet_open("eth0") function ethernet_open(interface_name) --- Sends a raw ethernet frame. -- -- The dnet object must be associated with a previously opened interface. The -- packet must include the IP and ethernet headers. If there was no previous -- valid call to ethernet_open an error is thrown -- ("dnet is not valid opened ethernet interface"). -- @param packet An ethernet frame to send. -- @see new_dnet -- @usage dnet:ethernet_send(packet) function ethernet_send(packet) --- Closes an ethernet interface. -- -- An error ("device is not valid ethernet interface") is thrown -- in case the provided argument is not valid. -- @see new_dnet, ethernet_open -- @usage dnet:ethernet_close() function ethernet_close() --- Opens a socket for raw IPv4 packet sending. -- @see new_dnet -- @usage dnet:ip_open() function ip_open() --- Sends a raw IPv4 or IPv6 packet. -- -- The dnet object must be associated with a previously opened socket. The -- packet must begin with an IP header. If there was no previous valid call -- to ip_open an error is thrown. -- @param packet An IP packet to send. -- @param dst A destination address, as a host table or string. If omitted, the -- destination address is read from the packet; however this is deprecated, because -- the packet does not contain the scope ID required to send to certain IPv6 -- addresses. -- @see new_dnet -- @usage dnet:ip_send(packet, dst) function ip_send(packet, dst) --- Closes a raw IPv4 socket. -- @see new_dnet, ip_open -- @usage dnet:ip_close() function ip_close() --- Writes to a log file. -- -- Writes string to file ("stdout" or "stderr"). -- Use stdnse.print_debug to print debug information based on the -- debugging level. -- @see stdnse.print_debug function log_write(file, string)