/*************************************************************************** * common_modified.cc -- This file holds all those functions and classes * * that have been reused from nmap's code but that needed to be modified * * in order to reuse them. * * * ***********************IMPORTANT NMAP LICENSE TERMS************************ * * * The Nmap Security Scanner is (C) 1996-2012 Insecure.Com LLC. Nmap is * * also a registered trademark of Insecure.Com LLC. This program is free * * software; you may redistribute and/or modify it under the terms of the * * GNU General Public License as published by the Free Software * * Foundation; Version 2 with the clarifications and exceptions described * * below. This guarantees your right to use, modify, and redistribute * * this software under certain conditions. If you wish to embed Nmap * * technology into proprietary software, we sell alternative licenses * * (contact sales@insecure.com). Dozens of software vendors already * * license Nmap technology such as host discovery, port scanning, OS * * detection, version detection, and the Nmap Scripting Engine. * * * * Note that the GPL places important restrictions on "derived works", yet * * it does not provide a detailed definition of that term. To avoid * * misunderstandings, we interpret that term as broadly as copyright law * * allows. For example, we consider an application to constitute a * * "derivative work" for the purpose of this license if it does any of the * * following: * * o Integrates source code from Nmap * * o Reads or includes Nmap copyrighted data files, such as * * nmap-os-db or nmap-service-probes. * * o Executes Nmap and parses the results (as opposed to typical shell or * * execution-menu apps, which simply display raw Nmap output and so are * * not derivative works.) * * o Integrates/includes/aggregates Nmap into a proprietary executable * * installer, such as those produced by InstallShield. * * o Links to a library or executes a program that does any of the above * * * * The term "Nmap" should be taken to also include any portions or derived * * works of Nmap, as well as other software we distribute under this * * license such as Zenmap, Ncat, and Nping. This list is not exclusive, * * but is meant to clarify our interpretation of derived works with some * * common examples. Our interpretation applies only to Nmap--we don't * * speak for other people's GPL works. * * * * If you have any questions about the GPL licensing restrictions on using * * Nmap in non-GPL works, we would be happy to help. As mentioned above, * * we also offer alternative license to integrate Nmap into proprietary * * applications and appliances. These contracts have been sold to dozens * * of software vendors, and generally include a perpetual license as well * * as providing for priority support and updates. They also fund the * * continued development of Nmap. Please email sales@insecure.com for * * further information. * * * * As a special exception to the GPL terms, Insecure.Com LLC grants * * permission to link the code of this program with any version of the * * OpenSSL library which is distributed under a license identical to that * * listed in the included docs/licenses/OpenSSL.txt file, and distribute * * linked combinations including the two. You must obey the GNU GPL in all * * respects for all of the code used other than OpenSSL. If you modify * * this file, you may extend this exception to your version of the file, * * but you are not obligated to do so. * * * * If you received these files with a written license agreement or * * contract stating terms other than the terms above, then that * * alternative license agreement takes precedence over these comments. * * * * Source is provided to this software because we believe users have a * * right to know exactly what a program is going to do before they run it. * * This also allows you to audit the software for security holes (none * * have been found so far). * * * * Source code also allows you to port Nmap to new platforms, fix bugs, * * and add new features. You are highly encouraged to send your changes * * to the dev@nmap.org mailing list for possible incorporation into the * * main distribution. By sending these changes to Fyodor or one of the * * Insecure.Org development mailing lists, or checking them into the Nmap * * source code repository, it is understood (unless you specify otherwise) * * that you are offering the Nmap Project (Insecure.Com LLC) the * * unlimited, non-exclusive right to reuse, modify, and relicense the * * code. Nmap will always be available Open Source, but this is important * * because the inability to relicense code has caused devastating problems * * for other Free Software projects (such as KDE and NASM). We also * * occasionally relicense the code to third parties as discussed above. * * If you wish to specify special license conditions of your * * contributions, just say so when you send them. * * * * This program is distributed in the hope that it will be useful, but * * WITHOUT ANY WARRANTY; without even the implied warranty of * * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the Nmap * * license file for more details (it's in a COPYING file included with * * Nmap, and also available from https://svn.nmap.org/nmap/COPYING * * * ***************************************************************************/ #include "nping.h" #include "common.h" #include "common_modified.h" #include "output.h" #include "../libnetutil/netutil.h" /***************************************************************************** * STUFF FROM TargetGroup.cc **************************************************************************** CHANGES: Modified parse_expr. Modified get_next_host: */ TargetGroup::TargetGroup() { Initialize(); } // Bring back (or start with) original state void TargetGroup::Initialize() { targets_type = TYPE_NONE; memset(addresses, 0, sizeof(addresses)); memset(current, 0, sizeof(current)); memset(last, 0, sizeof(last)); ipsleft = 0; } /* take the object back to the beginning without (mdmcl) * reinitalizing the data structures */ int TargetGroup::rewind() { /* For netmasks we must set the current address to the * starting address and calculate the ips by distance */ if (targets_type == IPV4_NETMASK) { currentaddr = startaddr; if (startaddr.s_addr <= endaddr.s_addr) { ipsleft = ((unsigned long long) (endaddr.s_addr - startaddr.s_addr)) + 1; return 0; } else assert(0); } /* For ranges, we easily set current to zero and calculate * the ips by the number of values in the columns */ else if (targets_type == IPV4_RANGES) { memset((char *)current, 0, sizeof(current)); ipsleft = (unsigned long long) (last[0] + 1) * (unsigned long long) (last[1] + 1) * (unsigned long long) (last[2] + 1) * (unsigned long long) (last[3] + 1); return 0; } #if HAVE_IPV6 /* For IPV6 there is only one address, this function doesn't * make much sence for IPv6 does it? */ else if (targets_type == IPV6_ADDRESS) { ipsleft = 1; return 0; } #endif /* If we got this far there must be an error, wrong type */ return -1; } /* For ranges, skip all hosts in an octet, (mdmcl) * get_next_host should be used for skipping the last octet :-) * returns: number of hosts skipped */ int TargetGroup::skip_range(_octet_nums octet) { unsigned long hosts_skipped = 0, /* number of hosts skipped */ oct = 0; /* octect number */ int i = 0; /* simple lcv */ /* This function is only supported for RANGES! */ if (targets_type != IPV4_RANGES) return -1; switch (octet) { case FIRST_OCTET: oct = 0; hosts_skipped = (last[1] + 1) * (last[2] + 1) * (last[3] + 1); break; case SECOND_OCTET: oct = 1; hosts_skipped = (last[2] + 1) * (last[3] + 1); break; case THIRD_OCTET: oct = 2; hosts_skipped = (last[3] + 1); break; default: /* Hmm, how'd you do that */ return -1; } /* catch if we try to take more than are left */ assert(ipsleft + 1>= hosts_skipped); /* increment the next octect that we can above us */ for (i = oct; i >= 0; i--) { if (current[i] < last[i]) { current[i]++; break; } else current[i] = 0; } /* reset all the ones below us to zero */ for (i = oct+1; i <= 3; i++) { current[i] = 0; } /* we actually don't skip the current, it was accounted for * by get_next_host */ ipsleft -= hosts_skipped - 1; return hosts_skipped; } /* Grab the next host from this expression (if any) and updates its internal state to reflect that the IP was given out. Returns 0 and fills in ss if successful. ss must point to a pre-allocated sockaddr_storage structure */ int TargetGroup::get_next_host(struct sockaddr_storage *ss, size_t *sslen) { int octet; struct sockaddr_in *sin = (struct sockaddr_in *) ss; struct sockaddr_in6 *sin6 = (struct sockaddr_in6 *) ss; /* CHANGE: Commented out. See note at the end of the method */ //startover: /* to handle nmap --resume where I have already // * scanned many of the IPs */ assert(ss); assert(sslen); if (ipsleft == 0) return -1; if (targets_type == IPV4_NETMASK) { memset(sin, 0, sizeof(struct sockaddr_in)); sin->sin_family = AF_INET; *sslen = sizeof(struct sockaddr_in); #if HAVE_SOCKADDR_SA_LEN sin->sin_len = *sslen; #endif if (currentaddr.s_addr <= endaddr.s_addr) { sin->sin_addr.s_addr = htonl(currentaddr.s_addr++); } else { error("Bogus target structure passed to %s", __func__); ipsleft = 0; return -1; } } else if (targets_type == IPV4_RANGES) { memset(sin, 0, sizeof(struct sockaddr_in)); sin->sin_family = AF_INET; *sslen = sizeof(struct sockaddr_in); #if HAVE_SOCKADDR_SA_LEN sin->sin_len = *sslen; #endif //if (o.debugging > 2) { /* CHANGE: Do not use NmapOps and do not use log_Write*/ // log_write(LOG_STDOUT, "doing %d.%d.%d.%d = %d.%d.%d.%d\n", current[0], current[1], current[2], current[3], addresses[0][current[0]],addresses[1][current[1]],addresses[2][current[2]],addresses[3][current[3]]); //} //outPrint(DBG_2, "doing %d.%d.%d.%d = %d.%d.%d.%d", current[0], current[1], current[2], current[3], addresses[0][current[0]],addresses[1][current[1]],addresses[2][current[2]],addresses[3][current[3]]); /* Set the IP to the current value of everything */ sin->sin_addr.s_addr = htonl(addresses[0][current[0]] << 24 | addresses[1][current[1]] << 16 | addresses[2][current[2]] << 8 | addresses[3][current[3]]); /* Now we nudge up to the next IP */ for(octet = 3; octet >= 0; octet--) { if (current[octet] < last[octet]) { /* OK, this is the column I have room to nudge upwards */ current[octet]++; break; } else { /* This octet is finished so I reset it to the beginning */ current[octet] = 0; } } if (octet == -1) { /* It didn't find anything to bump up, I must have taken the last IP */ assert(ipsleft == 1); /* So I set current to last with the very final octet up one ... */ /* Note that this may make current[3] == 256 */ current[0] = last[0]; current[1] = last[1]; current[2] = last[2]; current[3] = last[3] + 1; } else { assert(ipsleft > 1); /* There must be at least one more IP left */ } } else { assert(targets_type == IPV6_ADDRESS); assert(ipsleft == 1); #if HAVE_IPV6 *sslen = sizeof(struct sockaddr_in6); memset(sin6, 0, *sslen); sin6->sin6_family = AF_INET6; #ifdef SIN_LEN sin6->sin6_len = *sslen; #endif /* SIN_LEN */ memcpy(sin6->sin6_addr.s6_addr, ip6.sin6_addr.s6_addr, 16); sin6->sin6_scope_id = ip6.sin6_scope_id; #else fatal("IPV6 not supported on this platform"); #endif // HAVE_IPV6 } ipsleft--; /* CHANGE: These lines have been commented out to make this code * independent from NmapOps */ /* If we are resuming from a previous scan, we have already finished scans up to o.resume_ip. */ // if (sin->sin_family == AF_INET && o.resume_ip.s_addr) { // if (o.resume_ip.s_addr == sin->sin_addr.s_addr) // o.resume_ip.s_addr = 0; /* So that we will KEEP the next one */ // goto startover; /* Try again */ // } return 0; } /* Returns the last given host, so that it will be given again next time get_next_host is called. Obviously, you should only call this if you have fetched at least 1 host since parse_expr() was called */ int TargetGroup::return_last_host() { int octet; ipsleft++; if (targets_type == IPV4_NETMASK) { assert(currentaddr.s_addr > startaddr.s_addr); currentaddr.s_addr--; } else if (targets_type == IPV4_RANGES) { for(octet = 3; octet >= 0; octet--) { if (current[octet] > 0) { /* OK, this is the column I have room to nudge downwards */ current[octet]--; break; } else { /* This octet is already at the beginning, so I set it to the end */ current[octet] = last[octet]; } } assert(octet != -1); } else { assert(targets_type == IPV6_ADDRESS); assert(ipsleft == 1); } return 0; } /* TODO: WARNING: This functions has been modified for portability. Check * for label "CHANGE:" in the code to see the actual changes. * * UPDATE: Added support for DNS resolution caching. Using function * gethostbynameCached() instead of gethostbyname() */ /* Initializes (or reinitializes) the object with a new expression, such as 192.168.0.0/16 , 10.1.0-5.1-254 , or fe80::202:e3ff:fe14:1102 . Returns 0 for success */ int TargetGroup::parse_expr(const char * const target_expr, int af) { int i=0,j=0,k=0; int start, end; char *r,*s, *target_net; char *addy[5]; char *hostexp = strdup(target_expr); struct hostent *target; namedhost = 0; if (targets_type != TYPE_NONE) Initialize(); ipsleft = 0; if (af == AF_INET) { if (strchr(hostexp, ':')) fatal("Invalid host expression: %s -- colons only allowed in IPv6 addresses, and then you need the -6 switch", hostexp); /*struct in_addr current_in;*/ addy[0] = addy[1] = addy[2] = addy[3] = addy[4] = NULL; addy[0] = r = hostexp; /* First we break the expression up into the four parts of the IP address + the optional '/mask' */ target_net = hostexp; s = strchr(hostexp, '/'); /* Find the slash if there is one */ if (s) { char *tail; long netmask_long; *s = '\0'; /* Make sure target_net is terminated before the /## */ s++; /* Point s at the netmask */ if (!isdigit(*s)) { error("Illegal netmask value, must be /0 - /32 . Assuming /32 (one host)"); netmask = 32; } else { netmask_long = strtol(s, (char**) &tail, 10); if (*tail != '\0' || tail == s || netmask_long < 0 || netmask_long > 32) { error("Illegal netmask value, must be /0 - /32 . Assuming /32 (one host)"); netmask = 32; } else netmask = (u32) netmask_long; } } else netmask = 32; for(i=0; *(hostexp + i); i++) if (isupper((int) *(hostexp +i)) || islower((int) *(hostexp +i))) { namedhost = 1; break; } if (netmask != 32 || namedhost) { targets_type = IPV4_NETMASK; if (!inet_pton(AF_INET, target_net, &(startaddr))) { /* There is a bug report on the use of gethostbynameCached() * * I haven't been able to find any problem with that code but * still, the fact that DNS queries are cached does not improve * performance a lot. It may save one DNS query per execution * in those cases wher NpingOps::validateOptions() grabs the * first target and uses it to determine output network interface. * It would also save some queries in the case where a user * specified the same host twice in the commandlined, something * that does not make much sense anyway. However, since the call * to gethostbynameCached() seems to cause denial of service * for some people, I think it's ok to disable its use for now * and enable it later if there is a good reason for it. * * Luis MartinGarcia. */ //if ((target = gethostbynameCached(target_net))) { if ((target = gethostbyname(target_net))) { int count=0; memcpy(&(startaddr), target->h_addr_list[0], sizeof(struct in_addr)); while (target->h_addr_list[count]) count++; if (count > 1) outPrint(DBG_2,"Warning: Hostname %s resolves to %d IPs. Using %s.", target_net, count, inet_ntoa(*((struct in_addr *)target->h_addr_list[0]))); } else { error("Failed to resolve given hostname/IP: %s. Note that you can't use '/mask' AND '1-4,7,100-' style IP ranges", target_net); free(hostexp); return 1; } } if (netmask) { unsigned long longtmp = ntohl(startaddr.s_addr); startaddr.s_addr = longtmp & (unsigned long) (0 - (1<<(32 - netmask))); endaddr.s_addr = longtmp | (unsigned long) ((1<<(32 - netmask)) - 1); } else { /* The above calculations don't work for a /0 netmask, though at first * glance it appears that they would */ startaddr.s_addr = 0; endaddr.s_addr = 0xffffffff; } currentaddr = startaddr; if (startaddr.s_addr <= endaddr.s_addr) { ipsleft = ((unsigned long long) (endaddr.s_addr - startaddr.s_addr)) + 1; free(hostexp); return 0; } fprintf(stderr, "Host specification invalid"); free(hostexp); return 1; } else { targets_type = IPV4_RANGES; i=0; while(*r) { if (*r == '.' && ++i < 4) { *r = '\0'; addy[i] = r + 1; } else if (*r != '*' && *r != ',' && *r != '-' && !isdigit((int)*r)) fatal("Invalid character in host specification. Note in particular that square brackets [] are no longer allowed. They were redundant and can simply be removed."); r++; } if (i != 3) fatal("Invalid target host specification: %s", target_expr); for(i=0; i < 4; i++) { j=0; do { s = strchr(addy[i],','); if (s) *s = '\0'; if (*addy[i] == '*') { start = 0; end = 255; } else if (*addy[i] == '-') { start = 0; if (*(addy[i] + 1) == '\0') end = 255; else end = atoi(addy[i]+ 1); } else { start = end = atoi(addy[i]); if ((r = strchr(addy[i],'-')) && *(r+1) ) end = atoi(r + 1); else if (r && !*(r+1)) end = 255; } /* if (o.debugging > 2) * log_write(LOG_STDOUT, "The first host is %d, and the last one is %d\n", start, end); */ if (start < 0 || start > end || start > 255 || end > 255) fatal("Your host specifications are illegal!"); if (j + (end - start) > 255) fatal("Your host specifications are illegal!"); for(k=start; k <= end; k++) addresses[i][j++] = k; last[i] = j-1; if (s) addy[i] = s + 1; } while (s); } } memset((char *)current, 0, sizeof(current)); ipsleft = (unsigned long long) (last[0] + 1) * (unsigned long long) (last[1] + 1) * (unsigned long long) (last[2] + 1) * (unsigned long long) (last[3] + 1); } else { #if HAVE_IPV6 int rc = 0; assert(af == AF_INET6); if (strchr(hostexp, '/')) { fatal("Invalid host expression: %s -- slash not allowed. IPv6 addresses can currently only be specified individually", hostexp); } targets_type = IPV6_ADDRESS; struct addrinfo hints; struct addrinfo *result = NULL; memset(&hints, 0, sizeof(hints)); hints.ai_family = PF_INET6; rc = getaddrinfo(hostexp, NULL, &hints, &result); if (rc != 0 || result == NULL) { error("Failed to resolve given IPv6 hostname/IP: %s. Note that you can't use '/mask' or '[1-4,7,100-]' style ranges for IPv6. Error code %d: %s", hostexp, rc, gai_strerror(rc)); free(hostexp); if (result) freeaddrinfo(result); return 1; } assert(result->ai_addrlen == sizeof(struct sockaddr_in6)); struct sockaddr_in6 *sin6 = (struct sockaddr_in6 *) result->ai_addr; memcpy(&ip6, sin6, sizeof(struct sockaddr_in6)); ipsleft = 1; freeaddrinfo(result); #else // HAVE_IPV6 fatal("IPv6 not supported on your platform"); #endif // HAVE_IPV6 } free(hostexp); return 0; } /*****************************************************************************/ /* getpts() and getpts_simple() (see above) are wrappers for this function */ void getpts_aux(const char *origexpr, int nested, u8 *porttbl, int *portwarning) { long rangestart = -2343242, rangeend = -9324423; const char *current_range; char *endptr; //char servmask[128]; // A protocol name can be up to 127 chars + nul byte //int i; /* An example of proper syntax to use in error messages. */ const char *syntax_example; //if (change_range_type) // syntax_example = "-100,200-1024,T:3000-4000,U:60000-"; //else syntax_example = "-100,200-1024,3000-4000,60000-"; current_range = origexpr; do { while(isspace((int) *current_range)) current_range++; /* I don't know why I should allow spaces here, but I will */ //if (change_range_type) { //if (*current_range == 'T' && *++current_range == ':') { //current_range++; //range_type = SCAN_TCP_PORT; //continue; //} //if (*current_range == 'U' && *++current_range == ':') { //current_range++; //range_type = SCAN_UDP_PORT; //continue; //} //if (*current_range == 'S' && *++current_range == ':') { //current_range++; //range_type = SCAN_SCTP_PORT; //continue; //} //if (*current_range == 'P' && *++current_range == ':') { //current_range++; //range_type = SCAN_PROTOCOLS; //continue; //} //} if (*current_range == '[') { if (nested) fatal("Can't nest [] brackets in port/protocol specification"); //getpts_aux(++current_range, 1, porttbl, range_type, portwarning); getpts_aux(++current_range, 1, porttbl, portwarning); // ADDED // Skip past the ']'. This is OK because we can't nest []s while(*current_range != ']') current_range++; current_range++; // Skip over a following ',' so we're ready to keep parsing if (*current_range == ',') current_range++; continue; } else if (*current_range == ']') { if (!nested) fatal("Unexpected ] character in port/protocol specification"); return; } else if (*current_range == '-') { //if (range_type & SCAN_PROTOCOLS) // rangestart = 0; //else rangestart = 1; } else if (isdigit((int) *current_range)) { rangestart = strtol(current_range, &endptr, 10); //if (range_type & SCAN_PROTOCOLS) { // if (rangestart < 0 || rangestart > 255) //fatal("Protocols to be scanned must be between 0 and 255 inclusive"); //} else { if (rangestart < 0 || rangestart > 65535) fatal("Ports to be scanned must be between 0 and 65535 inclusive"); //} current_range = endptr; while(isspace((int) *current_range)) current_range++; } //else if (islower((int) *current_range) || *current_range == '*' || *current_range == '?') { //i = 0; //while (*current_range && !isspace((int)*current_range) && *current_range != ',' && *current_range != ']') { // servmask[i++] = *(current_range++); // if (i >= ((int)sizeof(servmask)-1)) // fatal("A service mask in the port/protocol specification is either malformed or too long"); // } // if (*current_range && *current_range != ']') current_range++; // We want the '] character to be picked up on the next pass // servmask[i] = '\0'; // Finish the string //i = addportsfromservmask(servmask, porttbl, range_type); //if (range_type & SCAN_PROTOCOLS) i += addprotocolsfromservmask(servmask, porttbl); //if (i == 0) // fatal("Found no matches for the service mask '%s' and your specified protocols", servmask); //continue; /*}*/ else { fatal("Error #485: Your port specifications are illegal. Example of proper form: \"%s\"", syntax_example); } /* Now I have a rangestart, time to go after rangeend */ if (!*current_range || *current_range == ',' || *current_range == ']') { /* Single port specification */ rangeend = rangestart; } else if (*current_range == '-') { current_range++; if (!*current_range || *current_range == ',' || *current_range == ']') { /* Ended with a -, meaning up until the last possible port */ //if (range_type & SCAN_PROTOCOLS) // rangeend = 255; //else rangeend = 65535; } else if (isdigit((int) *current_range)) { rangeend = strtol(current_range, &endptr, 10); // if (range_type & SCAN_PROTOCOLS) { // if (rangeend < 0 || rangeend > 255) // fatal("Protocols to be scanned must be between 0 and 255 inclusive"); // } else { if (rangeend < 0 || rangeend > 65535) fatal("Ports to be scanned must be between 0 and 65535 inclusive"); // } current_range = endptr; } else { fatal("Error #486: Your port specifications are illegal. Example of proper form: \"%s\"", syntax_example); } if (rangeend < rangestart) { //fatal("Your %s range %ld-%ld is backwards. Did you mean %ld-%ld?", // (range_type & SCAN_PROTOCOLS) ? "protocol" : "port", // rangestart, rangeend, rangeend, rangestart); fatal("Your port range %ld-%ld is backwards. Did you mean %ld-%ld?", rangestart, rangeend, rangeend, rangestart); // ADDED } } else { fatal("Error #487: Your port specifications are illegal. Example of proper form: \"%s\"", syntax_example); } /* Now I have a rangestart and a rangeend, so I can add these ports */ while(rangestart <= rangeend) { if (porttbl[rangestart]) { if (!(*portwarning)) { error("WARNING: Duplicate port number(s) specified. Are you alert enough to be using Nping? Have some coffee or grab a RedBull(tm)."); (*portwarning)++; } } else { //if (nested) { //if ((range_type & SCAN_TCP_PORT) && //nmap_getservbyport(rangestart, "tcp")) { //porttbl[rangestart] |= SCAN_TCP_PORT; //} //if ((range_type & SCAN_UDP_PORT) && //nmap_getservbyport(rangestart, "udp")) { //porttbl[rangestart] |= SCAN_UDP_PORT; //} //if ((range_type & SCAN_SCTP_PORT) && //nmap_getservbyport(rangestart, "sctp")) { //porttbl[rangestart] |= SCAN_SCTP_PORT; //} //if ((range_type & SCAN_PROTOCOLS) && //nmap_getprotbynum(rangestart)) { //porttbl[rangestart] |= SCAN_PROTOCOLS; //} //} else { //porttbl[rangestart] |= range_type; //} porttbl[rangestart]=1; // ADDED for NPING } rangestart++; } /* Find the next range */ while(isspace((int) *current_range)) current_range++; if (*current_range == ']') { if (!nested) fatal("Unexpected ] character in port specification"); return; } if (*current_range && *current_range != ',') { fatal("Error #488: Your port specifications are illegal. Example of proper form: \"%s\"", syntax_example); } if (*current_range == ',') current_range++; } while(current_range && *current_range); } /*****************************************************************************/ /* For systems without SCTP in netinet/in.h, such as MacOS X */ #ifndef IPPROTO_SCTP #define IPPROTO_SCTP 132 #endif /* IPv6 compatible version of nmap's devname2ipaddr() * @warning For this to work we need getinterfaces() not to skip IPv6 */ int devname2ipaddr_alt(char *dev, struct sockaddr_storage *addr) { struct interface_info *mydevs; struct sockaddr_storage *s=NULL; struct sockaddr_in *s4=NULL; struct sockaddr_in6 *s6=NULL; int numdevs; int i; mydevs = getinterfaces(&numdevs, NULL, 0); if (!mydevs) return -1; if( !addr || !dev ) fatal("devname2ipaddr(): NULL values supplied."); for(i=0; i < numdevs; i++) { s=(struct sockaddr_storage *)&mydevs[i].addr; s4=(struct sockaddr_in *)&mydevs[i].addr; s6=(struct sockaddr_in6 *)&mydevs[i].addr; if (s4->sin_family==AF_INET || s6->sin6_family==AF_INET6){ if (!strcmp(dev, mydevs[i].devfullname)) { memcpy(addr, s, sizeof(struct sockaddr_storage)); return 0; } } else{ /* Unknown family, skipping it... */ continue; } } return -1; } /* End of devname2ipaddr() */